References
- AIK (2016) Korean Building Code: Chapter 7. Steel Structures, Architectural Institute of Korea.
- Wardenier, J., Kurobane, Y., Packer, J.A., van der Vegte, G.J., and Zhao, X.-L. (2008) Construction with Hollow Steel Sections - No.1: Design guide for Circular Hollow Section (CHS) Joints Under Predominantly Static Loading, 2nd ed., CIDECT.
- AISC (2010) Specification for Structural Steel Buildings, American Institute of Steel Construction, Chicago, IL.
- CEN (2005) Eurocode 3: Design of Steel Structures - Part 1.8: Design of Joints, European Committee for Standardization, Brussels.
- CEN (2007) Eurocode 3: Design of Steel Structures - Part 1.12: Additional Rules for the Extension of EN 1993 up to Steel Grades S700, European Committee for Standardization, Brussels.
- Lee, C.-H., Kim, S.-H., Chung, D.-H., Kim, D.-K., and Kim, J.-W. (2017) Experimental and Numerical Study of Cold-formed High-strength Steel CHS X-joints, ASCE Journal of Structural Engineering, ASCE, Vol.143, No.8, 04017077. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001806
- Puthli, R., Ummenhofer, T., Bucak, O., Herion, S., Fleischer, O., Fischl, A., and Josat, O. (2010) Adaption and Extension of the Valid Design Formulae for Joints Made of High Strength Steels Up to S690 for Cold-formed and Hot-rolled Sections, Schlussbericht CIDECT Projekt 5BT, CIDECT.
- Watanabe, Y., Ochi, K., and Morimoto, K. (2015) FEA of CHS T-joints with High Yield Strength Steels, Proc. Eighth International Conference on Advances in Steel Structures, Lisbon, Portugal.
- Noordhoek, C. and Verheul, A. (1998) Static Strength of High Strength Steel Tubular Joints, CIDECT Report 5BD-9/98, Delft University of Technology, Delft.
- van der Vegte, G.J., Liu, D.K., Makino, Y., and Wardenier, J. (2003) New Chord Load Functions for Circular Hollow Section Joints, CIDECT Report 5BK-4/03, Delft University of Technology, Delft.
- 이철호, 김대경, 한규홍, 김진호, 이승은, 하태휴(2012) 고강도강재 단주의 압축강도 및 잔류응력 평가, 한국강구조학회논문집, 한국강구조학회, 제24권, 제1호, pp.23-34.(Lee, C.H., Kim, D.K., Han, K.H., Kim, J.H., Lee, S.E., and Ha, T.H. (2012) Compressive Strength and Residual Stress Evaluation of Stub Columns Fabricated of High Strength Steel, Journal of Korean Society of Steel Construction, KSSC, Vol.24, No.1, pp.23-34 (in Korean).)
- 이철호, 한규홍, 김대경, 박창희, 김진호, 이승은(2012) 800MPa급 고강도강 보 부재의 국부좌굴 및 비탄성 거동, 한국강구조학회논문집, 한국강구조학회, 제24권, 제4호, pp.479-490.(Lee, C.H., Han, K.H., Kim, D.K., Park, C.H., Kim, J.H., and Lee, S.E. (2012) Local Buckling and Inelastic Behaviour of 800MPa High-Strength Steel Beams, Journal of Korean Society of Steel Construction, KSSC, Vol.24, No. 4, pp.479-490 (in Korean).)
- 김대경, 이철호, 한규홍, 김진호, 이승은, 김진원(2015) 중심압축을 받는 고강도강 중간주의 좌굴강도 평가, 한국강구조학회논문집, 한국강구조학회, 제27권, 제4호, pp.377-386.(Kim, D.K., Lee, C.H., Han, K.H., Kim, J.H., Lee, S.E., and Kim, J.W. (2015) Buckling Strength of Concentrically Loaded High-Strength Steel Columns with Intermediate Slenderness, Journal of Korean Society of Steel Construction, KSSC, Vol.27, No.4, pp.377-386 (in Korean).)
- ISO (2013) Static Design Procedure for Welded Hollowsection Joints - Recommendations, ISO/FDIS 14346:2012(E), International Organization of Standardization.
- Simulia (2014) Abaqus 6.14: Abaqus/CAE User's Guide, Simulia, Providence, RI.
- van der Vegte, G. J. (1995) The static strength of uniplanar and multiplanar tubular T- and X-joints, Ph.D. Dissertation, Delft University of Technology, Delft.
- Kang, C.T., Moffat, D.G., and Mistry, J. (1998) Strength of DT Tubular Joints with Brace and Chord Compression, Journal of Structural Engineering, ASCE, Vol.124, No.7, pp.775-783. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:7(775)
- van der Vegte, G.J. and Makino, Y. (2010) Further research on chord length and boundary conditions of CHS T-and X-joints, Advanced Steel Construction, IJASC, Vol.6, No.3, pp.879-890.
- Lu, L.H., De Winkel, G.D., Yu, Y., and Wardenier, J. (1994) Deformation Limit for the Ultimate Strength of Hollow Section Joints, Proc. Sixth Int'l Symposium on Tubular Structures, Tubular Structures VI, pp.341-347.
- Zhao, X.-L., Wardenier, J., Packer, J. A., and van der Vegte, G.J. (2010) Current Static Design Guidance for Hollow-section Joints, Structures and Buildings, ICE, Vol.163, No.6, pp.361-373.
- Lipp, A. and Ummenhofer, T. (2015) Influence of Tensile Chord Stresses on the Strength of CHS X-joints - Experimental and Numerical Investigations, Proc. 15th Int'l Symposium on Tubular Structures, Tubular Structures XV, pp.379-386.
Cited by
- Effects of Web Restraint and Moment Gradient on Local Buckling of Slender Flange in H-shaped Beams vol.30, pp.5, 2018, https://doi.org/10.7781/kjoss.2018.30.5.245
- P - M Interactive Strength of Steel Plate-to-CHS X-Joints Including 600 MPa Tensile Strength Steel vol.32, pp.6, 2018, https://doi.org/10.7781/kjoss.2020.32.6.385