DOI QR코드

DOI QR Code

Response of circular footing on dry dense sand to impact load with different embedment depths

  • Ali, Adnan F. (Civil Engineering Department, University of Baghdad) ;
  • Fattah, Mohammed Y. (Building and Construction Engineering Department, University of Technology) ;
  • Ahmed, Balqees A. (Civil Engineering Department, University of Baghdad)
  • 투고 : 2017.07.13
  • 심사 : 2018.02.24
  • 발행 : 2018.04.25

초록

Machine foundations with impact loads are common powerful sources of industrial vibrations. These foundations are generally transferring vertical dynamic loads to the soil and generate ground vibrations which may harmfully affect the surrounding structures or buildings. Dynamic effects range from severe trouble of working conditions for some sensitive instruments or devices to visible structural damage. This work includes an experimental study on the behavior of dry dense sand under the action of a single impulsive load. The objective of this research is to predict the dry sand response under impact loads. Emphasis will be made on attenuation of waves induced by impact loads through the soil. The research also includes studying the effect of footing embedment, and footing area on the soil behavior and its dynamic response. Different falling masses from different heights were conducted using the falling weight deflectometer (FWD) to provide the single pulse energy. The responses of different soils were evaluated at different locations (vertically below the impact plate and horizontally away from it). These responses include; displacements, velocities, and accelerations that are developed due to the impact acting at top and different depths within the soil using the falling weight deflectometer (FWD) and accelerometers (ARH-500A Waterproof, and Low capacity Acceleration Transducer) that are embedded in the soil in addition to soil pressure gauges. It was concluded that increasing the footing embedment depth results in increase in the amplitude of the force-time history by about 10-30% due to increase in the degree of confinement. This is accompanied by a decrease in the displacement response of the soil by about 40-50% due to increase in the overburden pressure when the embedment depth increased which leads to increasing the stiffness of sandy soil. There is also increase in the natural frequency of the soil-foundation system by about 20-45%. For surface foundation, the foundation is free to oscillate in vertical, horizontal and rocking modes. But, when embedding a footing, the surrounding soil restricts oscillation due to confinement which leads to increasing the natural frequency. Moreover, the soil density increases with depth because of compaction, which makes the soil behave as a solid medium. Increasing the footing embedment depth results in an increase in the damping ratio by about 50-150% due to the increase of soil density as D/B increases, hence the soil tends to behave as a solid medium which activates both viscous and strain damping.

키워드

참고문헌

  1. Al-Ameri, A.F.I. (2014), "Transient and steady state response analysis of soil foundation system acted upon by vibration", Ph.D. Thesis, Civil Engineering Department, University of Baghdad, Iraq.
  2. Al-Azawi, T.K., Al-Azawi, R.K. and Al-Jaberi, Z.K. (2006), "Stiffness and damping properties of embedded machine foundations", J. Eng., Univ. Baghdad, 12(2), 429-443.
  3. Al-Homoud, A.S. and Al-Maaitah, O.N. (1996), "An experimental investigation of vertical vibration of model footings on san", Soil Dyn. Earthq. Eng., 15(7), 431-445. https://doi.org/10.1016/0267-7261(96)00023-1
  4. Al-Saffar, F.S.M. (2015), "Dynamic behavior of machine foundation resting on piles in a sandy soil", Ph.D. Thesis, Civil Engineering Department, University of Baghdad, Iraq.
  5. American Society of Testing and Materials (ASTM) (1969), Standared Test Method for Relative Density of Cohesionless Soils, ASTM D 2049-69 International, West Conshohocken, Pennsylvania, USA.
  6. American Society of Testing and Materials (ASTM) (2000), Standard Test Method for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density, ASTM D4254-00 International, West Conshohocken, Pennsylvania, USA.
  7. American Society of Testing and Materials (ASTM) (2006), Standard Test Method for Particle Size-Analysis of Soils, ASTM D422-02, West Conshohocken, Pennsylvania, USA.
  8. American Society of Testing and Materials (ASTM) (2006), Standard Test Method for Specific Gravity of Soil Solids by Water Pycnometer, ASTM D854, West Conshohocken, Pennsylvania, USA.
  9. Bhandari, P.K. and Sengupta, A. (2014), "Dynamic analysis of machine foundation", Int. J. Innov. Res. Sci. Eng. Technol., 3-4, 169-176.
  10. Das, B.M. and Ramana, G. (2011), Principles of Soil Dynamics, Cl-Engineering.
  11. Davies, M.C.R., Bowman, E.T. and White, D.J. (2010), "Physical modelling of natural hazards", Physical Modelling in Geotechnics, Two Volume Set: Proceedings of the 7th International Conference on Physical Modelling in Geotechnics (ICPMG 2010), June-July, Zurich, Switzerland
  12. Fattah, M.Y., Al-Mosawi, M.J. and Al-Ameri, A.F.I. (2017), "Stresses and pore water pressure induced by machine foundation on saturated sand", Ocean Eng., 146, 268-281. https://doi.org/10.1016/j.oceaneng.2017.09.055
  13. Fattah, M.Y., Hamood, M.J. and Abbas, S.A. (2014), "Behavior of plate on elastic foundation under impact load", Eng. Technol. J., 32(4), 1007-1027.
  14. Fattah, M.Y., Salim, N.M. and Al-Shammary, W.T. (2015), "Effect of embedment depth on response of machine foundation on saturated sand", Arab. J. Sci. Eng., 40(11), 3075-3098. https://doi.org/10.1007/s13369-015-1793-8
  15. Guellil, M.E., Harichane, Z., Djilali Berkane, H. and Sadouki, A. (2017), "Soil and structure uncertainty effects on the soil foundation structure dynamic response", Earthq. Struct., 12(2), 153-163. https://doi.org/10.12989/eas.2017.12.2.153
  16. Jayalekshmi, B.R., Thomas, A. and Shivashankar, R. (2014), "Dynamic soil-structure interaction studies on 275 m tall industrial chimney with openings", Earthq. Struct., 7(2), 233-250. https://doi.org/10.12989/eas.2014.7.2.233
  17. Kumar, S.S., Krishna, A.M. and Dey, A. (2013), "Parameters influencing dynamic soil properties: A review treatise", National Conference on Recent Advances in Civil Engineering, November.
  18. LS-DYNA Keyword User's Manual (2009), Volume 1, Livermore Software Technology Corporation (LSTC).
  19. Mandal, J.J. and Roychowdhury, S. (2008), "Response of rectangular raft foundations under transient loading", Proceedings of the 12th International Conference of International Association for Computer Methods and Advanced in Geomechanis (IACMAG), India.
  20. Plaxis 2D General Manual (2017), Delft University of Technology and Plaxis bv, the Netherlands.
  21. Prakash, S. and Puri, K.V. (2006), "Foundation for vibrating machines", J. Struct. Eng., 33(1), 13-29.
  22. ProShake Ground Response Analysis Program Version 2.0 User's Manual, EduPro Civil Systems, Inc. Sammamish, Washington.
  23. Svinkin, M.R. (2008), "Soil and structure vibrations from construction and industrial sources", Proceedings of the Sixth International Conference on Case Histories in Geotechnical Engineering, Omni Press, Arlington, Virginia.
  24. Turner, J.R. and Kulhawy, F.H. (1987), "Experimental analysis of drilled foundations subjected to repeated axial loads under drained conditions", Report EL-S32S, Electric Power Research Institute, Palo Alto, California.
  25. Xue, X., Ren, T. and Zhang, W. (2012), "Analysis of fatigue damage character of soils under impact load", J. Vib. Control, 19(11), 1728-1737. https://doi.org/10.1177/1077546312450732