DOI QR코드

DOI QR Code

Direct displacement-based seismic assessment of concrete frames

  • Peng, Chu (Department of Civil Engineering, South China University of Technology) ;
  • Guner, Serhan (Department of Civil and Environmental Engineering, University of Toledo)
  • Received : 2017.07.23
  • Accepted : 2017.11.15
  • Published : 2018.04.25

Abstract

Five previously-tested reinforced concrete frames were modelled using a nonlinear finite element analysis procedure to demonstrate the accurate response simulations for seismically-deficient frames through pushover analyses. The load capacities, story drifts, and failure modes were simulated. This procedure accounts for the effects of shear failures and the shear-axial force interaction, and thus is suitable for modeling seismically-deficient frames. It is demonstrated that a comprehensive analysis method with a capability of simulating material constitutive response and significant second-order mechanisms is essential in achieving a satisfactory response simulation. It is further shown that such analysis methods are invaluable in determining the expected seismic response, safety, and failure mode of the frame structures for a performance-based seismic evaluation. In addition, a new computer program was developed to aid researchers and engineers in the direct displacement-based seismic design process by assessing whether a frame structure meets the code-based performance requirements by analyzing the analysis results. As such, the proposed procedure facilitates the performance-based design of new buildings as well as the numerical assessment and retrofit design of existing buildings. A sample frame analysis was presented to demonstrate the application and verification of the approach.

Keywords

References

  1. ACI 318 (2008), Building Code Requirements for Structural Concrete, American Concrete Institute, Farmington Hills, MI, USA.
  2. ASCE 7-10 (2013), Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers, Reston, Virginia, USA.
  3. ASCE 41-13 (2013), Seismic Evaluation and Retrofit of Existing Buildings, American Society of Civil Engineers, Reston, Virginia, USA.
  4. Bairan, J.M. and Mari, A.R. (2007), "Multiaxial-coupled analysis of RC cross-sections subjected to combined forces", Eng. Struct., 29(8), 1722-1738. https://doi.org/10.1016/j.engstruct.2006.09.007
  5. Blosser, K. and Guner, S. (2016), User's Manual of FormWorks plus for VecTor5, Department of Civil Engineering, University of Toledo, Toledo, USA.
  6. Carr, A.J. (2007), Ruaumoko Manual: Volume 1, Computer Program Library, University of Canterbury, Christchurch, New Zealand.
  7. Ceresa, P., Petrini, L., Pinho, R. and Sousa, R. (2009), "A fibre flexure-shear model for seismic analysis of RC-framed structures", Earthq. Eng. Struct. Dyn., 38(5), 565-586. https://doi.org/10.1002/eqe.894
  8. Chak, I.N. (2013), "Janus: a post-processor for VecTor analysis software", M.A.Sc. Dissertation, Department of Civil Engineering, University of Toronto, Toronto, Canada.
  9. CSI (2013), Analysis Reference Manual for SAP2000(R) , ETABS(R) and $SAFE^{TM}$, Computers and Structures, Inc., Berkeley, CA, USA.
  10. FEMA 356 (2000), Prestandard and Commentary for the Seismic Rehabilitation of Buildings, Reston, Virginia.
  11. Ferreira, D., Bairan, J.M. and Mari, A. (2015), "Shear strengthening of reinforced concrete beams by means of vertical prestressed reinforcement", Struct. Infrastr. Eng. Mainten. Manage. Life-C. Des. Perform., 12(3), 394-410.
  12. Filiatrault, A. and Folz, B. (2002), "Performance-based seismic design of wood framed buildings", J. Struct. Eng., 128(1), 39-47. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:1(39)
  13. Ghannoum, W.M. and Moehle, J.P. (2012), "Shake-table tests of a concrete frame sustaining column axial failures", ACI Struct. J., 109(3), 393-402.
  14. Guner, S. (2016), "Simplified modeling of frame elements subjected to blast loads", ACI Struct. J., 113(2), 363-372.
  15. Guner, S. and Vecchio, F.J. (2008), User's Manual of VecTor5, Department of Civil Engineering, University of Toronto, Toronto, Canada.
  16. Guner, S. and Vecchio, F.J. (2010a), "Pushover analysis of shearcritical frames: formulation", ACI Struct. J., 107(1), 63-71.
  17. Guner, S. and Vecchio, F.J. (2010b), "Pushover analysis of shearcritical frames: verification and application", ACI Struct. J., 107(1), 72-81.
  18. Guner, S. and Vecchio, F.J. (2011), "Analysis of shear-critical reinforced concrete plane frame elements under cyclic loading", J. Struct. Eng., ASCE, 137(8), 834-843. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000346
  19. Guner, S. and Vecchio, F.J. (2012), "Simplified method for nonlinear dynamic analysis of shear-critical frames", ACI Struct. J., 109(5), 727-737.
  20. Loya, A.S., Lourenco, D.D.S, Guner, S. and Vecchio, F.J. (2015), User's Manual of Janus for VecTor5, Department of Civil Engineering, University of Toledo, Toledo, USA.
  21. Marini, A. and Spacone, E. (2006), "Analysis of reinforced concrete elements including shear effects", ACI Struct. J., 103(5), 645-655.
  22. McKenna, F., Fenves, G.L., Scott, M.H. and Jeremic, B. (2000), "Open system for earthquake engineering simulation (OpenSees)", Pacific Earthquake Engineering Research Center, Univ. of California, Berkeley, CA, USA.
  23. Petrangeli, M., Pinto, P.E. and Ciampi, V. (1999), "Fiber element for cyclic bending and shear of RC structures. I: theory", J. Eng. Mech., 125(9), 994-1001. https://doi.org/10.1061/(ASCE)0733-9399(1999)125:9(994)
  24. Priestley, M.J.N. (1993), "Myths and fallacies in earthquake engineering-conflicts between design and reality", Bull. NZ. Nat. Soc. Earthq. Eng., 26(3), 329-341.
  25. Priestley, M.J.N. (1998), "Brief comments on elastic flexibility of reinforced concrete frames, and significance to seismic design", Bull. NZ. Nat. Soc. Earthq. Eng., 31(2), 246-259.
  26. Priestley, M.J.N. and Kowalsky, M.J. (2000), "Direct displacement-based design of concrete buildings", Bull. NZ. Nat. Soc. Earthq. Eng., 33(4), 421-444.
  27. Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2007), Direct Displacement Based Design of Structures, Istituto Universitario di Studi Superiori (IUSS) Press, Pavia, Italy.
  28. Sadeghian, V. (2012), "Formworks-plus: improved pre-processor for Vector analysis software", M.A.Sc. Dissertation, Department of Civil Engineering, University of Toronto, Toronto, Canada.
  29. Seismosoft (2014), Seismostruct User Manual for Version 7.0, Seismosoft Ltd, Pavia, Italy.
  30. U.S. Seismic Design Maps (2016), United States Geological Survey (maps), Reston, Virginia, USA.
  31. Vecchio, F.J. (2000), "Disturbed stress field model for reinforced concrete: formulation", J. Struct. Eng., 126(9), 1070-1077. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:9(1070)
  32. Wu, C.L., Kuo, W.W., Yang, Y.S., Hwang, S.J., Elwood, K.J., Loh, C.H. and Moehle, J.P. (2008), "Collapse of a nonductile concrete frame: shaking table tests", Earthq. Eng. Struct. Dyn., 38(2), 205-224. https://doi.org/10.1002/eqe.853
  33. Xue, W.C., Cheng, B., Zheng, R.G., Li, L. and Li, J. (2011), "Seismic performance of nonprestressed and prestressed HPC frames under low reversed cyclic loading", J. Struct. Eng., 137(11), 1254-1262. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000367
  34. Yavari, S., Elwood, K.J., Wu, C.L., Lin, S.H., Hwang, S.J. and Moehle, J.P. (2013), "Shaking table tests on reinforced concrete frames without seismic detailing", ACI Struct. J., 110(6), 1001-1011.

Cited by

  1. Elasto-Damage constitutive modelling of recycled aggregate concrete vol.28, pp.1, 2018, https://doi.org/10.12989/cac.2021.28.1.013