DOI QR코드

DOI QR Code

다공성 매체 내 비혼성 대체 과정에서 주입 유량이 거동 양상에 미치는 영향

The Effect of Flow Rate on the Process of Immiscible Displacement in Porous Media

  • 박규령 (부경대학교 에너지자원공학과) ;
  • 김선옥 (부경대학교 에너지자원공학과) ;
  • 이민희 (부경대학교 지구환경과학과) ;
  • 왕수균 (부경대학교 에너지자원공학과)
  • Park, Gyuryeong (Department of Energy Resources Engineering, Pukyong National University) ;
  • Kim, Seon-ok (Department of Energy Resources Engineering, Pukyong National University) ;
  • Lee, Minhee (Department of Earth Environmental Science Engineering, Pukyong National University) ;
  • Wang, Sookyun (Department of Energy Resources Engineering, Pukyong National University)
  • 투고 : 2017.12.12
  • 심사 : 2018.01.08
  • 발행 : 2018.03.31

초록

A series of experiments using transparent micromodels with an artificial pore network etched on glass plates was performed to investigate the effects of flow rate on the migration and distribution of resident wetting porewater (deionized water) and injecting non-wetting fluid (n-hexane). Multicolored images transformed from real RGB images were used to distinguish n-hexane from porewater and pore structure. Hexane flooding followed by immiscible displacement with porewater, migration through capillary fingering, preferential flow and bypassing were observed during injection experiments. The areal displacement efficiency increases as the injection of n-hexane continues until the equilibrium reaches. Experimental results showed that the areal displacement efficiency at equilibrium increases as the flow rate increases. Close observation reveals that preferential flowpaths through larger pore bodies and throats and clusters of entrapped porewater were frequently created at lower flow rate. At higher flow rate, randomly oriented forward and lateral flowpaths of n-hexane displaces more porewater at an efficiency close to stable displacement. It may resulted from that the pore pressure of n-hexane, at higher flow rate, increases fast enough to overcome capillary pressure acting on smaller pore throats as well larger ones. Experimental results in this study may provide fundamental information on migration and distribution of immiscible fluids in subsurface porous media.

키워드

참고문헌

  1. Bertrand, E., Bonn, D., Broseta, D., Dobb, H., Indekeu, J.O., Meunier, J., Ragil, K., and Shahidzadeh, N., 2002, Wetting on alkanes on water, J. Petrol. Sci. Eng., 33, 217-222. https://doi.org/10.1016/S0920-4105(01)00191-7
  2. Cao, S.C., Dai, S., and Jung, J., 2016, Supercritical $CO_2$ and brine displacement in geological carbon sequestration: Micromodel and pore network simulation studies. Int. J. Greenh. Gas Con., 44, 104-114. https://doi.org/10.1016/j.ijggc.2015.11.026
  3. Chalbaud, C., Robin, M., Lombard, J.M., Martin, F., Bertin, H., and Egermann, P., 2010, Brine/$CO_2$ interfacial properties and effects on $CO_2$ storage in deep saline aquifers, Oil Gas Sci. Technol., 65(4), 541-555. https://doi.org/10.2516/ogst/2009061
  4. Chiquet, P., Broseta, D., and Thibeau, S., 2007, Wettability alteration of caprock minerals by carbon dioxide, Geofluids, 7, 112-122. https://doi.org/10.1111/j.1468-8123.2007.00168.x
  5. Dicarlo, D.A., Sahni, A., and Blunt, M.J., 2000, The effect of wettability on three-phase relative permeability, Transp. Porous Media, 39, 347-366. https://doi.org/10.1023/A:1006653323374
  6. IAPWS, 2008, Release on the IAPWS Formulation 2008 for the Thermodynamic Properties of Seawater. The International Association for the Properties of Water and Steam, Berlin, Germany.
  7. Lenormand, R., Touboul, E., and Zarcone, C., 1988, Numerical models and experiments on immiscible displacements in porous media, J. Fluid Mech., 189, 165-187. https://doi.org/10.1017/S0022112088000953
  8. Lenormand, R., 1990, Liquids in porous media, J. phys., 2, 79-88.
  9. Mekhtiev, S.I., Mamedov, A.A., Khalilov, Sh.Kh., and Aleskerov, M.A., 1975, Izv. Vyssh. Uchebn. Zaved. Neft. Gaz, 3, 64.
  10. Naderi, K. and Babadagli, T., 2011, Pore-scale investigation of immiscible displacement process in porous media under highfrequency sound waves, J. Fluid Mech., 680, 336-360. https://doi.org/10.1017/jfm.2011.166
  11. O'Carroll, D.M. and Sleep, B.E., 2007, Hot water flushing for immiscible displacement of a viscous NAPL, J. Contam. Hydrol., 91, 247-266. https://doi.org/10.1016/j.jconhyd.2006.11.003
  12. Wang, Y., Zhang, C.Y., Wei, N., Oostrom, M., Wietama, T.W., Li, X.C., and Bonneville, A., 2013, Experimental study of crossover from capillary to viscous fingering for supercritical $CO_2$-water displacement in a homogeneous pore network, Environ. Sci. Technol., 47(1), 212-218. https://doi.org/10.1021/es3014503
  13. Wildenschild, D., Armstrong, R.T., Herring, A.L., Young, I.M., and Carey, J.W., 2011, Exploring capillary trapping efficiency as a function of interfacial tension, viscosity, and flow rate, Energy Procedia, 4, 4945-4952. https://doi.org/10.1016/j.egypro.2011.02.464
  14. Yang, D., Tontiwachwuthikul, P., and Gu, Y., 2005, Interfacial interactions between reservoir brine and $CO_2$ at high pressure and elevated temperature, Energy Fuels, 19, 216-223. https://doi.org/10.1021/ef049792z
  15. Zeppieri, S., Rodriguez, J., and Ramos, A.L., 2001, Interfacial tension of alkane + water systems, J. Chem. Eng. Data, 46, 1086-1088. https://doi.org/10.1021/je000245r
  16. Zheng, X., Mahabadi, N., Yun, T.S., and Jang, J., 2017, Effect of capillary and viscous force on $CO_2$ saturation and invasion pattern in the microfluidic chip, J. Geophys. Res.: Solid Earth, 122, 1634-1647.
  17. Zhang, C., Oostrom, M., Wietsma, T.W., Grate, J.W., and Warner, M.G., 2011, Influence of viscous and capillary forces on immiscible fluid displacement: Pore-scale experimental study in a water-wet micromodel demonstrating viscous and capillary fingering, Energy Fuels, 25, 3493-3505. https://doi.org/10.1021/ef101732k