Abstract
This study deals with a process for the recovery of hydrogen isotopes from methane ($CQ_4$) and water ($Q_2O$) containing tritium in the nuclear fusion exhaust gas (Q is Hydrogen, Deuterium, Tritium). Steam Methane Reforming and Water Gas Shift reactions are used to convert $CQ_4$ and $Q_2O$ to $Q_2$ and the produced $Q_2$ is recovered by the subsequent Pd membrane. In this study, one circulation loop consisting of catalytic reactor, Pd membrane, and circulation pump was applied to recover H components from $CH_4$ and $H_2O$, one of $CQ_4$ and $Q_2O$. The conversion of $CH_4$ and $H_2O$ was measured by varying the catalytic reaction temperature and the circulating flow rate. $CH_4$ conversion was 99% or more at the catalytic reaction temperature of $650^{\circ}C$ and the circulating flow rate of 2.0 L/min. $H_2O$ conversion was 96% or more at the catalytic reaction temperature of $375^{\circ}C$ and the circulating flow rate of 1.8 L/min. In addition, the amount of $CQ_4$ generated by Korean Demonstration Fusion Power Plant (K-DEMO) in the future was predicted. Then, the treatment process for the $CQ_4$ was proposed and HAZOP (hazard and operability) analysis was conducted to identify the risk factors and operation problems of the process.
본 연구는 핵융합 배가스 중 삼중수소가 포함된 화합물인 메탄($CQ_4$) 및 물($Q_2O$)로부터 수소동위원소를 회수하기 위한 공정에 관한 것이다(Q는 수소, 중수소, 삼중수소). 수증기-메탄 개질반응과 수성가스 전환반응을 이용하여 $CQ_4$와 $Q_2O$를 $Q_2$로 변환시키고, 후속하는 팔라듐 분리막으로 생성된 $Q_2$를 회수한다. 본 연구에서는 $CQ_4$ 및 $Q_2O$ 중 하나의 물질인 $CH_4$ 및 $H_2O$로부터 수소 회수를 위해 촉매반응기, 팔라듐 분리막, 순환펌프로 구성된 순환루프를 적용하였다. 촉매반응온도 및 순환유량을 변화시켜가며 $CH_4$ 및 $H_2O$의 전환율을 측정하였다. $CH_4$ 중 수소 회수는 촉매반응온도 $650^{\circ}C$, 순환유량 2.0 L/min 조건에서 99% 이상의 $CH_4$ 전환율을확인하였고, $H_2O$ 중수소 회수는촉매반응온도 $375^{\circ}C$, 순환유량 1.8 L/min 조건에서 96% 이상의 $H_2O$ 전환율을 확인하였다. 이와 더불어, 향후 핵융합 실증로(K-DEMO)에서의 $CQ_4$ 발생량을 예측하고, 이에 대한 처리공정을 제안하였으며, HAZOP (Hazard and Operability) 분석을 실시하여 공정의 위험요소와 운전상의 문제점을 도출하고 해결방안을 제시하였다.