DOI QR코드

DOI QR Code

Cyclic behaviour of concrete encased steel (CES) column-steel beam joints with concrete slabs

  • Chu, Liusheng (School of Civil Engineering, Zhengzhou University) ;
  • Li, Danda (School of Natural and Built Environments, University of South Australia) ;
  • Ma, Xing (School of Natural and Built Environments, University of South Australia) ;
  • Zhao, Jun (School of Civil Engineering, Zhengzhou University)
  • 투고 : 2018.08.20
  • 심사 : 2018.12.27
  • 발행 : 2018.12.25

초록

In this paper, the cyclic behavior of steel beam-concrete encased steel (CES) column joints was investigated experimentally and numerically. Three frame middle joint samples with varying concrete slab widths were constructed. Anti-symmetrical low-frequency cyclic load was applied at two beam ends to simulate the earthquake action. The failure modes, hysteretic behavior, ultimate load, stiffness degradation, load carrying capacity degradation, displacement ductility and strain response were investigated in details. The three composite joints exhibited excellent seismic performance in experimental tests, showing high load-carrying capacity, good ductility and superior energy dissipation ability. All three joint samples reached their ultimate loads due to shear failure. Numerical results from ABAQUS modelling agreed well with the test results. Finally, the effect of the concrete slab on ultimate load was analyzed through a parametric study on concrete strength, slab thickness, as well as slab width. Numerical simulation showed that slab width and thickness played an important role in the load-carrying capacity of such joints. As a comparison, the influence of concrete grade was not significant.

키워드

과제정보

연구 과제 주관 기관 : National Key R&D Program of China, National Natural Science Foundation of China

참고문헌

  1. Begum, M., Serajus, S.M., Tauhid, B.K.N. and Ahmed, W. (2013), "Cost analysis of steel concrete composite structures in Bangladesh", Asian J. Civil Eng., 14, 935-944
  2. Chen, Z. and Liu, X. (2018), "Seismic behavior of Steel reinforced concrete cross-shaped column under combined torsion", Steel Compos. Struct., Int. J., 26(4), 407-420.
  3. Chen, C., Chen, C. and Hoang, T. (2016), "Role of concrete confinement of wide-flange structural steel shape in steel reinforced concrete columns under cyclic loading", Eng. Strct., 110, 79-87. https://doi.org/10.1016/j.engstruct.2015.12.002
  4. Chinese Standard (1996), Specifications of testing methods for seismic resistant buildings (JGJ101-96); China Architecture & Building Press, Beijing, China.
  5. Chinese Standard (2010), Code for Seismic Design of Buildings(GB50011-2010); China Plan Press, Beijing, China.
  6. Lagaros, N.D. and Magoula, E. (2013), "Life-cycle cost assessment of mid-rise and high-rise steel and steel-reinforced concrete composite minimum cost building designs", Struct. Des. Tall Special Build., 22, 954-974. https://doi.org/10.1002/tal.752
  7. Ma, H., Li, S., Li, Z., Liu, Y., Dong, J. and Zhang, P. (2018), "Shear behavior of composite frame inner joints of SRRC column-steel beam subjected to cyclic loading", Steel Compos. Struct., Int. J., 27(4), 495-508.
  8. Orr, J.J., Ibell, T.J., Darby, A.P. and Evernden, M. (2014), "Shear behaviour of non-prismatic steel reinforced concrete beams", Eng. Struct., 71, 48-59. https://doi.org/10.1016/j.engstruct.2014.04.016
  9. Pisano, A.A., Fuschi, P. and De Domenico, D. (2013), "Peak loads and failure modes of steel-reinforced concrete beams: Predictions by limit analysis", Eng. Struct., 56, 477-488. https://doi.org/10.1016/j.engstruct.2013.05.030
  10. Shanmugam, N.E. and Lakshmi, B. (2001), "State of the art report on steel-concrete composite columns", J. Constr. Steel Res., 57(10), 1041-1080. https://doi.org/10.1016/S0143-974X(01)00021-9
  11. Wang, Q., Shi, Q. and Tian, H. (2015), "Seismic behavior of steel reinforced concrete (CES) joints with new-type section steel under cyclic loading", Steel Compos. Struct., Int. J., 19(6), 1561-1580. https://doi.org/10.12989/scs.2015.19.6.1561
  12. Wang, Q., Shi, Q. and Tian, H. (2016), "Experimental study on shear capacity of SRC joints with different arrangement and sizes of cross-shaped steel in column", Steel Compos. Struct., Int. J., 21(2), 267-287. https://doi.org/10.12989/scs.2016.21.2.267
  13. Wang, J., Lu, J., Zhang, H. and Zhao, C. (2018), "Experimental investigation on seismic performance of endplate composite joints to CFST columns", J. Constr. Steel Res., 145, 352-367. https://doi.org/10.1016/j.jcsr.2018.03.006
  14. Xiang, P., Su, Y., Wang, H. and Wan, Y. (2017), "Experimental investigation on joints between steel-reinforced concrete Tshaped column and reinforced concrete beam under bidirectional low-cyclic reversed loading", Adv. Struct. Eng., 20(3), 446-460. https://doi.org/10.1177/1369433216653841
  15. Xu, J., Chen, Z., Chen, Y. and Xue, J. (2015), "Earthquake Damage Evaluation of T-Shaped CES Composite Column-Steel Beams in 3D Connection Joints", Adv. Struct. Eng., 18(5), 701-713. https://doi.org/10.1260/1369-4332.18.5.701
  16. Yan, C., Yang, D., Ma, Z. and Jia, J. (2017), "Hysteretic model of SRUHSC column and CES beam joints considering damage effects", Mater. Struct., 50, 1-13. https://doi.org/10.1617/s11527-016-0885-6
  17. Zhang, J. and Jia, J. (2016), "Experimental study on seismic behavior of composite frame consisting of CES beams and SRUHSC columns subjected to cyclic loading", Constr. Build. Mater., 125, 1055-1065. https://doi.org/10.1016/j.conbuildmat.2016.08.157