Fig. 1. Risk factors of DCM reinforce system
Fig. 2. Probabilistic risk assessment of DCM system
Fig. 3. Cross section of DCM system
Fig. 4. COV of DCM pile
Fig. 5. External stability of DCM system on ordinary condition
Fig. 6. Internal stability of DCM system on ordinary condition
Fig. 7. Probability distribution of DCM system on ordinary condition
Fig. 8. External stability of DCM system on earthquake condition
Fig. 9. Internal stability of DCM system on earthquake condition
Fig. 10. Probability distribution of DCM system on earthquake condition
Table 1. Analysis method of system reliability
Table 2. Target reliability index and probability of failure
Table 3. Stability evaluation method
Table 4. Random variables for DCM system
Table 5. Probabilistic risk assessment result of DCM overall system on ordinary condition
Table 6. Probabilistic risk assessment result of DCM overall system on earthquake condition
References
- Becker, D. E. (1996), "Eighteenth Canadian Geotechnical Colloquium: Limit State Design for Foundations, Part II, Development for the National Building Code of Canada", Canadian Geotechnical Journal, Vol.33, No.6, pp.984-1007. https://doi.org/10.1139/t96-125
- Hyundai E&C (2013), Probabilistic Stability Evaluation for DCM improved ground on Incheon International Port and Harbor Structures.
- Kim, B. J. (2004), "Assessment of Partial Safety Factors for Limit States Design of Foundations", Journal of The Korean Geotechnical Society, Vol.20, No.9, pp.77-89.
- Kim, C. D., Kim, B. I., Kim, S. I. and Lee, J. H. (2008), "Reliability-Based Design of Shallow Foundations Considering The Probability Distribution Types of Random Variables", Journal of The Korean Geotechnical Society, Vol.24, No.1, pp.1-12.
- Kitazume, M. and Terashi, M. (2013), The Deep Mixing Method, CRC Press.
- K-water (2009), National Technical Strategy Plan for Performance Improvement and Safety Management of Water Structures.
- Ministry of Land, Transport and Maritime Affairs, MOLIT (2011), Reliability-based Design Method for Quay Wall (Final draft).
- Ministry of Oceans and Fisheries, MOF (2015), Port and Harbor Design Code.
- Park, J. M. (2012), "Analysis of LRFD resistance factors for internal stability of deep mixing improved ground", Dongguk University Ph.D Thesis.
- Phoon, K., Kulhawy, F. and Grigoriu, M. (1995), "Reliability-Based Design of Foundations for Transmission Line Structures", Electrical Power Research Institute (EPRI), Report TR-105000.
- Whitman, R. V. (1984), "Evaluating calculated risk in geotechnical engineering", Journal of Geotechnical Engineering, ASCE, 110(2), pp.145-188.
- Wolff, T. F. (1994). "Evaluating the Reliability of Existing Levees", prepared for U.S. Army Engineer Waterways Experiment Station, Geotechnical Laboratory, Vicksburg.