References
- M. Hosenuzzaman, N. A. Rahim, J. Selvaraj, M. Hasanuzzaman, A. B. M. A. Malek, A. Nahar, "Global prospects, progress, policies, and environmental impact of solar photovoltaic power generation", Renew. Sustain. Energy Rev., Vol. 41, pp. 284-297, 2015. https://doi.org/10.1016/j.rser.2014.08.046
- R. Banos, F. Manzano-Agugliaro, F. G. Montoya, C. Gil, A. Alcayde, J. Gomez, "Optimization methods applied to renewable and sustainable energy: a review", Renew. Sustain. Energy Rev., Vol. 15, No. 4, pp. 1753-1766, 2011. https://doi.org/10.1016/j.rser.2010.12.008
-
Q. Guo, S. J. Kim, M. Kar, W. N. Sharfarman, R. W. Birkmire, E. A. Stach, R. Agrawal, H. W. Hillhouse, "Development of
$CulnSe_2$ nanocrystal and nanoring inks for low-cost solar cells", Nano Lett., Vol. 8, No. 9, pp. 2982-2987, 2008. https://doi.org/10.1021/nl802042g - W. Wang, M. T. Winkler, O. Gunawan, T. Gokmen, T. K. Todorov, Y. Zhu, D. B. Mitzi, "Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency", Adv. Energy Mater., Vol. 4, No. 7, p. 1301465, 2014. https://doi.org/10.1002/aenm.201301465
-
B. G. Mendis, M. C. J. Goodman, J. D. Major, A. A. Taylor, K. Durose, D. P. Halliday, "The role of secondary phase precipitation on grain boundary electrical activity in
$Cu_2ZnSnS_4$ (CZTS) photovoltaic absorber layer material", J. Appl. Phys., Vol. 112, No. 12, p. 124508, 2012. https://doi.org/10.1063/1.4769738 -
T. Minami, Y. Nishi, T. Miyata, J. I. Nomoto, "High-efficiency oxide solar cells with ZnO/
$Cu_2O$ heterojunction fabricated on thermally oxidized$Cu_2O$ sheets", Appl. Phys. Express, Vol. 4, No. 6, p. 62301, 2011. https://doi.org/10.1143/APEX.4.062301 -
A. Mittiga, E. Salza, F. Sarto, M. Tucci, R. Vasanthi, "Heterojunction solar cell with 2% efficiency based on a
$Cu_2O$ substrate", Appl. Phys. Lett., Vol. 88, p. 163502, 2006. https://doi.org/10.1063/1.2194315 - Y. S. Lee, J. Heo, S. C. Siah, J. P. Mailoa, R. E. Brandt, S. B. Kim, R. G. Gordon, T. Buonassisi, "Ultrathin amorphous zinc-tin-oxide buffer layer for enhancing heterojunction interface quality in metal-oxide solar cells", Energy Environ. Sci., Vol. 6, No. 7, pp. 2112-2118, 2013. https://doi.org/10.1039/c3ee24461j
-
Y. Nishi, T. Miyata, T. Minami, "The impact of heterojunction formation temperature on obtainable conversion efficiency in n-ZnO/p-
$Cu_2O$ solar cells", Thin Solid Films, Vol. 528, pp. 72-76, 2013. - T. K. S. Wong, S. Zhuk, S. Masudy-Panah, G. K. Dalapati, "Current status and future prospects of copper oxide heterojunction solar cells", Materials (Basel)., Vol. 9, No. 4, p. 271, 2016. https://doi.org/10.3390/ma9040271
-
Y. Ievskaya, R. L. Z. Hoye, A. Sadhanala, K. P. Musselman, J. L. MacManus-Driscoll, "Fabrication of ZnO/
$Cu_2O$ heterojunctions in atmospheric conditions: Improved interface quality and solar cell performance", Sol. Energy Mater. Sol. Cells, Vol. 135, pp. 43-48, 2015. https://doi.org/10.1016/j.solmat.2014.09.018 -
M. Tadatsugu, N. Yuki, M. Toshihiro, "Efficiency enhancement using a
$Zn_{1-x}Ge_x-O$ thin film as an n-type window layer in$Cu_2O$ -based heterojunction solar cells", Appl. Phys. Express, Vol. 9, No. 5, p. 52301, 2016. https://doi.org/10.7567/APEX.9.052301 -
T. Minami, Y. Nishi, T. Miyata, "Heterojunction solar cell with 6% efficiency based on an n-type aluminum-gallium-oxide thin film and p-type sodium-doped
$Cu_2O$ sheet", Appl. Phys. Express, Vol. 8, No. 2, p. 22301, 2015. https://doi.org/10.7567/APEX.8.022301 -
M. Abdelfatah, J. Ledig, A. El-Shaer, A. Wagner, V. Marin-Borras, A. Sharafeev, P. Lemmens, M. M. Mosaad, A. Waag, A. Bakin, "Fabrication and characterization of low cost
$Cu_2O$ /ZnO:Al solar cells for sustainable photovoltaics with earth abundant materials", Sol. Energy Mater. Sol. Cells, Vol. 145, pp. 454-461, 2016. https://doi.org/10.1016/j.solmat.2015.11.015 -
K. Mizuno, M. Izaki, K. Murase, T. Shinagawa, M. Chigane, M. Inaba, A. Tasaka, Y. Awakura, "Structural and electrical characterizations of electrodeposited p-Type semiconductor
$Cu_2O$ films", J. Electrochem. Soc., Vol. 152, No. 4, pp. C179-C182, 2005. https://doi.org/10.1149/1.1862478 - Y. S. Lee, D. Chua, R. E. Brandt, S. C. Siah, J. V. Li, J. P. Mailoa, S. W. Lee, R. G. Gordon, T. Buonassisi, "Atomic layer deposited gallium oxide buffer layer enables 1.2 V open-circuit voltage in cuprous oxide solar cells", Adv. Mater., Vol. 26, No. 27, pp. 4704-4710, 2014. https://doi.org/10.1002/adma.201401054
-
S. W. Lee, Y. S. Lee, J. Heo, S. C. Siah, D. Chua, R. E. Brandt, S. B. Kim, J. P. Mailoa, T. Buonassisi, R. G. Gordon, "Improved
$Cu_2O$ -based solar cells using atomic layer deposition to control the Cu oxidation state at the p-n junction", Adv. Energy Mater., Vol. 4, p. 1301916, 2014. https://doi.org/10.1002/aenm.201301916 -
Y. Ievskaya, R. L. Z. Hoye, A. Sadhanala, K. P. Musselman, J. L. MacManus-Driscoll, "Improved heterojunction quality in
$Cu_2O$ -based solar cells through the optimization of atmospheric pressure spatial atomic layer deposited$Zn_{1-x}Mg_xO$ ", J. Vis. Exp., Vol. 113, p. e53501, 2016. -
S. Bijani, L. Martinez, M. Gabas, E. A. Dalchiele, J.-R. Ramos-Barrado, "Low-temperature electrodeposition of
$Cu_2O$ thin films : modulation of micro-nanostructure by modifying the applied potential and electrolytic bath pH", J. Phys. Chem. C, Vol. 113, pp. 19482-19487, 2009. https://doi.org/10.1021/jp905952a - T. K. Galeev, N. N. Bulgakov, G. A. Savelieva, N. M. Popova, "Surface-properties of platinum and palladium", React. Kinet. Catal. Lett., Vol. 14, No. 1, pp. 61-65, 1980. https://doi.org/10.1007/BF02061265
- R. Munter, "Advanced oxidation processes - current status and prospect", Proc. Est. Acad. Sci. Chem., Vol. 50, No. 2, pp. 59-80, 2001.