그림 1. FR4 기판에 콘포멀 스프레이 코팅으로 EMI 차단막을 형성한 시료의 구조 Fig. 1. The structure of the EMI shield layers fabricated by conformal spray coating on FR4 substrate
그림 2. FR4 기준 시료의 시뮬레이션 결과 Fig. 2. Simulation results of FR4 reference sample
그림 3. FR4 기판에 동박이 입혀진 경우의 시뮬레이션 결과 Fig. 3. Simulation result for Copper cladding FR4 substrate sample
그림 4. 그래파이트막이 코팅된 FR4 시료의 시뮬레이션 결과 Fig. 4. Simulation results for graphite coated FR4 substrate
그림 5. 측정 시스템 구성 Fig. 5. Measurement instrument set-up
그림 6. FR4 기판 위에 콘포멀 스프레이 코팅으로 형성한 EMI 차단막; (a)니켈-아크릴 도료, (b)은-아크릴 도료 Fig. 6. EMI shield layers fabricated by conformal spray coating on FR4 substrate; (a) nickel-acrylic, (b) silver-acrylic
그림 7. 점도 400 cPs인 은-아크릴 도료를 50 um로 코팅한 시료의 차단효과(SE) Fig. 7. Shielding effectiveness of 50 um-thick silver-acrylic coated sample with 400 cPs viscosity
그림 8. 점도 100 cPs인 은-아크릴 도료를 50 um 및 35 um 로 코팅한 시료의 차단효과(SE) Fig. 8. Shielding effectiveness of 50 um-thick and 35 um-thick silver-acrylic coated sample with 100 cPs viscosity
그림 9. 니켈-아크릴 도료 EMI 차단막의 두께에 따른 차폐효과(SE) 변화 Fig. 9. Shielding effectiveness for EMI shield layers of the nickel-acrylic material
그림 10. 은-아크릴 도료 EMI 차단막의 두께에 따른 차폐효과(SE) 변화 Fig. 10. Shielding effectiveness for EMI shield layers of the silver-acrylic material
그림 11. 니켈-아크릴 도료와 은-아크릴 도료의 EMI 차폐효과(SE) 비교 Fig. 11. EMI Shielding effectiveness comparison between the nickel-acrylic material and the silver-acrylic material
참고문헌
- C. Morari, L. Balan, "Methods for determining shielding effectiveness of materials", Electrotechnics, Vol. 63, No. 2, 2015.
- D. D. Soyaslan, "Investigation of Test Instruments for EM Shielding Effectiveness of Conductive Fabrics and Their Composites", Journal of Safety Engineering, Vol. 2, No. 2, pp. 39-44, 2013. DOI: https://doi.org/10.5923/j.safety.20130202.04
- S. K. Kim, "Fabrication of Millimeter Wave Radiometer", The Journal of The Institute of Internet, Broadcasting and Communication(JIIBC), Vol. 12, No. 3, pp. 71-74, 2012. DOI: https://doi.org/10.7236/jiwit.2012.12.3.71
- W-H Lee, T-J Chung, "Implementation of An 1.5Gbit/s Wireless Data Transmission System at 300 GHz", The Journal of The Institute of Internet, Broadcasting and Communication(JIIBC), Vol. 11, No. 2, pp. 1-6, 2011. https://doi.org/10.7236/JIWIT.2011.11.2.001
- S. K Das and B. K. Shinaja, "Numerical solution of higher order mode cutoff frequencies in symmetric TEM cell using Finite Element Method", IEEE Trans. EMC-32(4), pp. 264-268, Nov. 1990. DOI: https://doi.org/10.1109/15.59885
- J. Hur, W-H. Lee "An Accurate Method to measure Shielding Effectiveness of EMI Spray Coating Film", The Journal of The Institute of Internet, Broadcasting and Communication(JIIBC), Vol. 18, No. 4, pp. 79-83, 2018. https://doi.org/10.7236/JIIBC.2018.18.4.79