Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

Utilization Evaluation of Digital Surface Model by UAV for Reconnaissance Survey of Construction Project

건설공사 현황측량을 위한 UAV DSM의 활용성 평가

  • Park, Joon-Kyu (Department of Civil Engineering, Seoil University) ;
  • Um, Dae-Yong (Department of Civil Engineering, Korea National University of Transportation)
  • 박준규 (서일대학교 토목공학과) ;
  • 엄대용 (한국교통대학교 토목공학과)
  • Received : 2018.02.05
  • Accepted : 2018.03.09
  • Published : 2018.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

The unmanned aerial vehicle (UAV) is used in various fields, such as land surveying, facility management, and disaster monitoring and restoration because it has low operational costs, fast data acquisition, and can generate a digital surface model (DSM). Recently, the UAV has been applied to process management in construction projects. Construction projects are widely distributed not only in urban areas but also in mountainous areas and rural areas where people are rarely in traffic or in vehicles. Projects range from a few hundred meters to several kilometers long. In order to perform a reconnaissance survey, a surveying method using a global positioning system (GPS) or a total station has mainly been used. However, these methods have a disadvantage in that a lot of time is required for data acquisition. This study's purpose is to evaluate the usability of a UAV DSM for surveying a construction area. Data was acquired using the UAV and a three-dimensional (3D) laser scanner, and the DSM of the construction site was created through data processing. The UAV DSM showed accuracy to within 30 cm based on the 3D laser scanner data, and a process comparison between the two work methods was able to present the usability of the UAV DSM in the field of construction surveying. Future utilization of the UAV DSM is expected to greatly improve the efficiency of work in construction projects.

UAV(Unmanned Aerial Vehicle)는 운용비용이 저렴하고, 데이터 취득의 속도가 빠르며 DSM(Digital Surface Model)의 생성이 가능하기 때문에 토지조사, 시설물 관리, 재난감시 및 복구 등 다양한 분야에 활용이 증가하고 있으며, 최근 건설 분야에서도 공정관리에 UAV 적용을 시도하고 있다. 건설공사 현장은 도심지, 산지, 농어촌 등에 광범위하게 분포되어 있으며, 짧게는 수백 미터에서 길게는 수 킬로미터에 이르기까지 그 범위가 다양하다. 건설공사 현황측량을 위해 기존에는 GPS나 토털스테이션을 이용한 측량방법이 주로 활용되어 왔다. 그러나 이 방법들은 데이터 취득에 많은 시간이 소요되는 단점이 있다. 본 연구에서는 건설공사 현황측량을 위한 UAV DSM의 활용성을 평가하고자 하였다. UAV와 3D 레이저 스캐너를 이용하여 데이터를 취득하고, 데이터 처리를 통해 건설현장의 DSM을 생성하였다. 3D 레이저 스캐너 데이터를 기준으로 UAV DSM를 비교하여 30cm 이내의 정확도를 확인하였으며, 두 작업 방법 간의 공정 비교를 통해 UAV DSM의 건설공사 현황측량 분야 활용성을 제시할 수 있었다. 향후 UAV DSM의 활용은 건설공사 측량에서 작업효율성을 크게 향상시킬 수 있을 것으로 기대된다.

Keywords

References

  1. Park, J. K. and Kim, M. G., "Development of GNSS Field Survey System for Effective Creation of Survey Result and Enhancement of User Convenience", Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography, vol. 35, no. 3, pp. 203-210, 2017. DOI: http://dx.doi.org/10.7848/ksgpc.2017.35.3.203
  2. Lee, S. J. and Choi, Y. S., "On-site Demonstration of Topographic Surveying Techniques at Open-pit Mines using a Fixed-wing Unmanned Aerial Vehicle (Drone)", Tunnel & Underground Space, vol. 25, no. 6, pp. 527-533, 2015. DOI: https://doi.org/10.7474/TUS.2015.25.6.527
  3. Yoon, H. S., Cho, J. H., Park, H. E., and Yoo, S. M., "Development of Near Real Time GNSS Precipitable Water Vapor System Using Precise Point Positioning", Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography, vol. 35, no. 6, pp. 471-484, 2017. https://doi.org/10.7848/KSGPC.2017.35.6.471
  4. Kim, Y. M., Lee, S. B., Kim, J. Y., and Park, Y. J., "Disaster Management Using High Resolution Optical Satellite Imagery and Case Analysis", Journal of the Korean Society of Hazard Mitigation, vol. 17, no. 3, pp. 117-124, 2017. DOI: https://doi.org/10.9798/KOSHAM.2017.17.3.117
  5. Lee, G. S., Choi, Y. W., Lee, M. H., Kim, S. G., and Cho, G. S. "Reconnaissance Surveying for Cultural Assets using Unmanned Aerial Vehicle", Journal of the Korean Association of Cadastre Information, vol. 18, no. 3, pp. 25-34, 2016.
  6. Lee, J. W. and Sung, S. M., "Accuracy Analysis of Boundary Determination in Dwelling Site According to Different Placement of Boundary Point Using UAV Photogrammetry", Journal of the Korean Society of Cadastre, vol. 32, no. 3, pp. 123-134, 2016. DOI: https://doi.org/10.21562/kjs.2016.04.50.2.123
  7. Y. R. Choi, J. S. Lee and H. C. Yun, "Extraction of Forest Resources Using High Density LiDAR Data", Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography, vol. 33, no. 2, pp. 73-81, 2015. DOI: https://doi.org/10.7848/ksgpc.2015.33.2.73
  8. Chung, M. K., Kim, C. J., Choi, K. H., Chung, D. K., and Kim, Y. G., "Development of LiDAR Simulator for Backpack-mounted Mobile Indoor Mapping System", Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography, vol. 35, no. 2, pp. 91-102, 2017. DOI: http://dx.doi.org/10.7848/ksgpc.2017.35.2.91
  9. Choi, S. Y., "A Study on the Improvement of UAV Aerial Photogrammetry Policies", Journal of the Korean Association of Cadastre Information, vol. 19, no. 3, pp. 125-139, 2017.
  10. C. N. Lee and J. H. Oh, "LiDAR Chip for Automated Geo-referencing of High-Resolution Satellite Imagery", Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography, vol. 32, no. 1, pp. 319-326, 2014. DOI: https://doi.org/10.7848/ksgpc.2014.32.4-1.319
  11. S. W. Shin, K. I. Bang and W. S. Cho, "Planar Patch Extraction from LiDAR Data Using Optimal Parameter Selection", Journal of the Korea Society For Geospatial Information System, vol. 19, no. 1, pp. 97-103, 2011.
  12. Choi, S. P., Ham, J. H., Kim, M. S. Kim, Yang, I. T., and Nam, U. N., "Slope Terrain Analysis According to Geographical Feature and Survey Place Based on Terrestrial LiDAR Data", Journal of the Korean Society for Geospatial Information System, vol. 18, no. 2, pp. 63-68, 2010.
  13. Kiljae,Ahn, Yongsung Kim, Basic Study of Architectural Design Using low-cost, low-altitute photogrammertric system, Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology, vol. 5, no. 4, pp.789-796, August 2015. DOI: http://dx.doi.org/10.14257/AJMAHS.2015.08.54
  14. Joon Kyu Park, Min Gyu Kim,PPK GNSS System based UAV Photogrammetry for Construction of Urban Disaster Prevention Information, Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology, vol. 7, no. 4, pp. 355-362, April 2017. DOI: http://dx.doi.org/10.14257/AJMAHS.2017.04.83
  15. Young Jin Park, Min Gyu Kim, Analysis of Characteristics of Ortho Image by Type of Terrain Model using Unmanned Aerial Vehicle, Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology, vol. 5, no. 5, pp. 505-513, October 2015. DOI: http://dx.doi.org/10.14257/AJMAHS.2015.10.37
  16. Dae Yong Um, Joon Kyu Park, Analysis of UAV Photogrammetric Method for Generation of Terrain Model and Ortho Image, Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology, vol. 6, no. 8, pp. 577-584, August 2016. DOI: http://dx.doi.org/10.14257/AJMAHS.2016.08.57