DOI QR코드

DOI QR Code

Vibration control of small horizontal axis wind turbine blade with shape memory alloy

  • Mouleeswaran, Senthil Kumar (Department of Production Engineering, PSG college of Technology) ;
  • Mani, Yuvaraja (Department of Mechanical Engineering, PSG college of Technology) ;
  • Keerthivasan, P. (Department of Production Engineering, PSG college of Technology) ;
  • Veeraragu, Jagadeesh (Department of Mechanical Engineering, PSG college of Technology)
  • 투고 : 2017.09.07
  • 심사 : 2018.01.19
  • 발행 : 2018.03.25

초록

Vibrational problems in the domestic Small Horizontal Axis Wind Turbines (SHAWT) are due to flap wise vibrations caused by varying wind velocities acting perpendicular to its blade surface. It has been reported that monitoring the structural health of the turbine blades requires special attention as they are key elements of a wind power generation, and account for 15-20% of the total turbine cost. If this vibration problem is taken care, the SHAWT can be made as commercial success. In this work, Shape Memory Alloy (SMA) wires made of Nitinol (Ni-Ti) alloys are embedded into the Glass Fibre Reinforced Polymer (GFRP) wind turbine blade in order to reduce the flapwise vibrations. Experimental study of Nitinol (Ni-Ti) wire characteristics has been done and relationship between different parameters like current, displacement, time and temperature has been established. When the wind turbine blades are subjected to varying wind velocity, flapwise vibration occurs which has to be controlled continuously, otherwise the blade will be damaged due to the resonance. Therefore, in order to control these flapwise vibrations actively, a non-linear current controller unit was developed and fabricated, which provides actuation force required for active vibration control in smart blade. Experimental analysis was performed on conventional GFRP and smart blade, depicted a 20% increase in natural frequency and 20% reduction in amplitude of vibration. With addition of active vibration control unit, the smart blade showed 61% reduction in amplitude of vibration.

키워드

참고문헌

  1. Aoki, T. and Shimamoto, A. (2004), "Active vibration control using cantilever beam of smart matrix composite with embedded shape memory alloy", Key Eng. Mater., 270. Trans Tech Publications.
  2. Arrigan, J., Pakrashi, V., Basu, B. and Nagarajaiah, S. (2011), "Control of flapwise vibrations in wind turbine blades using semi-active tuned mass dampers", Struct. Control Health Monit., 18(8), 840-851. https://doi.org/10.1002/stc.404
  3. Bhargaw, H.N., Ahmed, M. and Sinha, P. (2013), "Thermo-electric behaviour of NiTi shape memory alloy", T. Nonferrous Metals Soc. China , 23(8), 2329-2335. https://doi.org/10.1016/S1003-6326(13)62737-5
  4. Gupta, K., Sawhney, S., Jain, S.K. and Darpe, A.K. (2003), "Stiffness characteristics of fibre-reinforced composite shaft embedded with shape memory alloy wires", Defence Sci. J., 53(2), 167. https://doi.org/10.14429/dsj.53.2263
  5. Jovanovic, M.M., Simonovic, A.M., Zoric, N.D., Lukic, N.S., Stupar, S.N. and Ilic, S.S. (2013), "Experimental studies on active vibration control of a smart composite beam using a PID controller", Smart Mater. Struct., 22(11), 115038. https://doi.org/10.1088/0964-1726/22/11/115038
  6. Khot, S.M., et al. (2012), "Active vibration control of cantilever beam by using PID based output feedback controller", J. Vib. Control, 18(3), 366-372. https://doi.org/10.1177/1077546311406307
  7. Lee, J.W., Kim, J.K., Han, J.H. and Shin, H.K. (2013), "Active load control for wind turbine blades using trailing edge flap", Wind Struct., 16(3), 263-278. https://doi.org/10.12989/was.2013.16.3.263
  8. Lim, Y.H.. (2003), "Finite-element simulation of closed loop vibration control of a smart plate under transient loading", Smart Mater. Struct., 12(2), 272. https://doi.org/10.1088/0964-1726/12/2/316
  9. Lin, Y.J., Lee, T., Choi, B. and Saravanos, D. (1999), "An application of smart-structure technology to rotor blade tip vibration control", J. Vib. Control, 5(4), 639-658. https://doi.org/10.1177/107754639900500408
  10. Mani, Y. and Senthilkumar, M. (2013), "Smart material (SMA)-based actively tuned dynamic vibration absorber for vibration control in real time applications", J. Eng. Technol., 3(2), 90-96. https://doi.org/10.4103/0976-8580.113045
  11. Mani, Y. and Senthilkumar, M. (2015), "Shape memory alloy-based adaptive-passive dynamic vibration absorber for vibration control in piping applications", J. Vib. Control, 21(9), 1838-1847. https://doi.org/10.1177/1077546313492183
  12. Mollasalehi, E., Wood, D.H. and Sun, Q. (2012), "Small wind turbine tower structural vibration", Proceedings of the ASME IMECE, Houston, TX.
  13. Qiao, Y., Han, J., Zhang, C. and Chen, J. (2012), "Modeling smart structure of wind turbine blade", Appl. Compos. Mater., 19(3-4), 491-498. https://doi.org/10.1007/s10443-011-9210-2
  14. Qiu, Z. (2015), "Experiments on vibration suppression for a piezoelectric flexible cantilever plate using nonlinear controllers", J. Vib. Control, 21(2), 300-319. https://doi.org/10.1177/1077546313487762
  15. Quek, S.T., Wang, S.Y. and Ang, K.K. (2003), "Vibration control of composite plates via optimal placement of piezoelectric patches", J. Intel. Mat. Syst. Str., 14(4-5), 229-245.
  16. Saad, M.S., Jamaluddin, H. and Mat Darus, I.Z. (2015), "Online monitoring and self-tuning control using pole placement method for active vibration control of a flexible beam", J. Vib. Control, 21(3), 449-460. https://doi.org/10.1177/1077546313485105
  17. Sanusi, K.O., Ayodele, O.L. and Khan, M.T.E. (2014), "A concise review of the applications of NiTi shape-memory alloys in composite materials", South African J. Sci., 110(7-8), 1-5.
  18. Sellami, T., Berriri, H., Darcherif, A.M., Jelassi, M. and Mimouni, M.F. (2016), "Modal and harmonic analysis of three-dimensional wind turbine models", Wind Eng., 40(6), 518-527. https://doi.org/10.1177/0309524X16671093
  19. Singh, S.P., Pruthi, H.S. and Agarwal, V.P. (2003), "Efficient modal control strategies for active control of vibrations", J. Sound Vib., 262(3), 563-575. https://doi.org/10.1016/S0022-460X(03)00111-1
  20. Tushar, C. and Mukesh, S. (2014), "Experimental vibration analysis of piezo-laminated beam", Int. Res. J. Sci. Eng., 2(3), 94-99.
  21. Xu, S.X. and Koko. T.S. (2004), "Finite element analysis and design of actively controlled piezoelectric smart structures", Finite Elem. Anal. Des., 40(3), 241-262. https://doi.org/10.1016/S0168-874X(02)00225-1
  22. Yuvaraja, M. and Senthilkumar, M. (2013), "Comparative study on vibration characteristics of a flexible GFRP composite beam using SMA and PZT actuators", Procedia Eng., 64, 571-581. https://doi.org/10.1016/j.proeng.2013.09.132

피인용 문헌

  1. A distributed parametric model of shape memory alloy-based resonant frequency tunable cantilevered PZT energy harvester with tip mass vol.8, pp.1, 2019, https://doi.org/10.1007/s41683-019-00034-0
  2. Switching linear quadratic Gaussian control of a flexible blade structure containing magnetorheological fluid vol.42, pp.3, 2018, https://doi.org/10.1177/0142331219878956
  3. Linear Vibration of the Rotary Plate Under Combined Excitations in Subsonic Airflow vol.12, pp.8, 2020, https://doi.org/10.1142/s175882512050088x
  4. Analytical model of shape memory alloy embedded smart beam, under actuated condition vol.27, pp.6, 2018, https://doi.org/10.12989/sss.2021.27.6.991