DOI QR코드

DOI QR Code

Estimation of geomechanical parameters of tunnel route using geostatistical methods

  • Aalianvari, Ali (Department of Mining Engineering, Faculty of Engineering, University of Kashan) ;
  • Soltani-Mohammadi, Saeed (Department of Mining Engineering, Faculty of Engineering, University of Kashan) ;
  • Rahemi, Zeynab (Department of Mining Engineering, Faculty of Engineering, University of Kashan)
  • 투고 : 2017.04.08
  • 심사 : 2017.09.07
  • 발행 : 2018.04.10

초록

Geomechanical parameters are important factors for engineering projects during design, construction and support stages of tunnel and dam projects. Geostatistical estimation methods are known as one of the most significant approach at estimation of Geomechanical parameters. In this study, Azad dam headrace tunnel is chosen to estimate Geomechanical parameters such as Rock Quality Designation (RQD) and uniaxial compressive strength (UCS) by ordinary kriging as a geostatistical method. Also Rock Mass Rating (RMR) distribution is presented along the tunnel. Main aim in employment of geostatistical methods is estimation of points that unsampled by sampled points.To estimation of parameters, initially data are transformed to Gaussian distribution, next structural data analysis is completed, and then ordinary kriging is applied. At end, specified distribution maps for each parameter are presented. Results from the geostatistical estimation method and actual data have been compared. Results show that, the estimated parameters with this method are very close to the actual parameters. Regarding to the reduction of costs and time consuming, this method can use to geomechanical estimation.

키워드

참고문헌

  1. Aalianvari, A. (2014), "Optimum depth of grout curtain around pumped storage power cavern based on geological conditions", Bull. Eng. Geol. Environ., 73(3), 775-780 https://doi.org/10.1007/s10064-013-0550-z
  2. Aalianvari, A., Tehrani, M.M. and Soltanimohammadi, S. (2013), "Application of geostatistical methods to estimation of water flow from upper reservoir of Azad pumped storage power plant", Arab. J. Geosci., 6(7), 2571-2579. https://doi.org/10.1007/s12517-012-0528-3
  3. Barton, N. (1983), "Application of Q-system and index tests to estimate shear strength and deformability of rock masses", Proceedings of the International Symposium on Engineering Geology and Underground Construction, Lisbon, Portugal.
  4. Bieniawski, Z.T. (1978), "Determining rock mass deformability: experience from case histories", J. Rock Mech. Min. Sci. Geomech. Abstr., 15(5), 237-247. https://doi.org/10.1016/0148-9062(78)90956-7
  5. Chiles, J.P. and Delfiner, P. (1999), Geostatistics: Modeling Spatial Uncertainty, Wiley, New York, U.S.A.
  6. Christaras, B. and Chatziangelou, M. (2014), "Blastability quality system (BQS) for using it, in bedrock excavation", Struct. Eng. Mech., 51(5), 823-845. https://doi.org/10.12989/SEM.2014.51.5.823
  7. Deutsch, C.V. and Journel, A.G. (1997), Geostatistical Software Library and User's Guide, Oxford University Press, New York, U.S.A.
  8. Doostmohammadi, M., Jafari, A. and Asghari, O. (2014), "Geostatistical modeling of uniaxial compressive strength along the axis of the Behesht-Abad tunnel in Central Iran", Bull. Eng. Geol. Environ., 74(3), 789-802.
  9. Exadaktylos, G. and Stavropoulou, M. (2008), "A specific upscaling theory of rock mass parameters exhibiting spatial variability: Analytical relations and computational scheme", J. Rock Mech. Min. Sci., 45(7), 1102-1125 https://doi.org/10.1016/j.ijrmms.2007.11.008
  10. Exadaktylos, G., Liolios, P. and Barakos, G. (2007), "Some new developments on the representation and standardization of rock mechanics data: from the laboratory to the full scale project", , Proceedings of the 11th International Congress on Rock Mechanics, Lisbon, Portugal, July.
  11. Gurocak, Z. and Kilic, R. (2005), "Effect of weathering on the geomechanical properties of the Miocene basalts in Malatya, Eastern Turkey", Bull. Eng. Geol. Environ., 64(4), 373-381. https://doi.org/10.1007/s10064-005-0005-2
  12. Hejazi, Y., Dias, D. and Kastner, R. (2008), "Impact of constitutive models on the numerical analysis of underground constructions", Acta Geotech, 3(4), 251-258. https://doi.org/10.1007/s11440-008-0056-1
  13. Jeon, S., Hong, C. and You, K. (2009), Design of Tunnel Supporting System Using Geostatistical Methods, in Geotechnical Aspects of Underground Construction in Soft Ground, 781-784.
  14. Ozturk, C.A. and Nasuf, E. (2002), "Geostatistical assessment of rock zones for tunneling", Tunn. Undergr. Sp. Technol., 17(3), 275-285. https://doi.org/10.1016/S0886-7798(02)00023-8
  15. Woo, J., Kim, D. and Na, W.B. (2015), "Application of numerical simulation of submersed rock-berm structure under anchor collision for structural health monitoring of submarine power cables", Smart Struct. Syst., 15(2), 299-314. https://doi.org/10.12989/sss.2015.15.2.299
  16. Yoon, S., Lee, S.R., Kim, Y.T. and Go, G.H. (2015), "Estimation of saturated hydraulic conductivity of Korean weathered granite soils using a regression analysis", Geomech. Eng., 9(1), 101-113. https://doi.org/10.12989/gae.2015.9.1.101

피인용 문헌

  1. Rock Mass Quality Prediction of Open-Pit Gold Mine Slope Based on the Kriging Interpolation Method vol.38, pp.6, 2018, https://doi.org/10.1007/s10706-020-01397-0