Fig. 1. (a) SEM image of milled Co-Fe-Cr-O pigments, (b) photo image and (c) single drop formation of Co-Fe-Cr-O ceramic ink.
Fig. 2. (a) Particle size analysis and (b) X-diffraction patterns of attrition-milled kaolin raw material.
Fig. 3. SEM images of attrition-milled kaolin raw material: (a) 0 h, (b) 1 h, (c) 2 h.
Fig. 5. Optical images of ink-jet printed pattern on surface glaze including attrition-milled kaolin of ceramic tile (a) before and (b) after 2nd sintering.
Fig. 4. Pore size distribution of attrition-milled kaolin raw material.
Table 1 Properties of black ceramic ink used in this study
Table 2 XRF analsis results of frits used in this study
Table 3 Specific surface area of attrition-milled kaolin and surface roughness of surface glaze
Table 4 Properties of surface glaze of ceramic tile including attrition-milled kaolin after 2nd sintering
참고문헌
- L. Baraldi, "World production and consumption of ceramic tiles", Ceramic World Review 123 (2017) 56.
- P.M.T. Cavalcante, M. Dondi, G. Guarini, M. Raimondo and G. Baldi, "Colour performance of ceramic nano-pigments", Dyes Pigm. 80 (2009) 226. https://doi.org/10.1016/j.dyepig.2008.07.004
- I. Hutching, "Ink-jet printing for the decoration of ceamic tiles: technology and opportunity", Actas de QUALICER (2010) 1.
- D. Verucchi and M. Cavedoni, "Pigmented ceramic inks", World Ceram. Rev. (2011) 91.
- G. Ferrari and P. Zannini, "Thermal behavior of vehicles and digital inks for inkjet decoaraion of ceramic tiles", Thermochin. Acta 639 (2016) 41. https://doi.org/10.1016/j.tca.2016.07.002
- J.H. Lee, H.J. Hwang, J.H. Kim, K.T. Hwang and K.S. Han, "Effect of chrome substitution on coloration characteristics of black ceramic pigments", J. Kor. Ceram. Soc. 51 (2014) 505. https://doi.org/10.4191/kcers.2014.51.5.505
-
K.C. Lee, J.W. Yoon, J.H. Kim, K.T. Hwang and K.S. Han, "Synthesis and characterization of
$CoAl_2O_4$ glazed blue ink for ink-jet printing", Korean J. Mater. Res. 24 (2014) 73. https://doi.org/10.3740/MRSK.2014.24.2.73 - M. Montorsi, C. Mugoni, A. Passalacqua, A. Annovi, F. Marani, L. Fossa, R. Capitani and T. Manfredini, "Improvement of color quality and reduction of defects in the ink-jet printing technology for ceramic tiles production: A Design of Experiments study", Ceram. Int. 42 (2016) 1459. https://doi.org/10.1016/j.ceramint.2015.09.091
- H.G. No, U.S. Kin, J.H. Kim, W.S. Cho, J.H. Choi and E.T. Kang, "Glaze development and color management assessment for high-resolution digital ceramic printing", J. Kor. Soc. Color Studies 32 (2018) 13. https://doi.org/10.17289/jkscs.32.2.201805.13
- A. Hladnik and T. Muck, "Characterization of pigments in coating formulations for high-end ink-jet papers", Dyes Pigm. 54 (2002) 253. https://doi.org/10.1016/S0143-7208(02)00050-5
- C. Poilly, "Influence of kaolin in inkjet printing on glaze", Ceramic World Review 112 (2015) 86.
- J.H. Kim, K.T. Hwang, W.S. Cho and K.S. Han, "Printability of digital color ceramic ink on glazed surface of ink-jet printed ceramic tile", J. Kor. Cryst. Growth and Cryst. Technol. 27 (2017) 1.
- J.W. Kwon, J.H. Lee, K.T. Hwang, J.H. Kim and K.S. Han, "Formulation and evaluation of glass-ceramic ink for digital ink-jet printing", Korean J. Mater. Res. 27 (2017) 583. https://doi.org/10.3740/MRSK.2017.27.11.583
- K.S. Lee.. "Influence of type and mixing ratio of pigments on ink-jet grade printing qualities", Nat. Kangwon Univ., Mater's Thesis (2002).
- L. Bourgy and C. Poilly, "The influence of kaolin in digital ceramic decoration", Ceramic World Review 120 (2017) 98.