산업경영시스템학회지 (Journal of Korean Society of Industrial and Systems Engineering)

  • 제41권4호
  • /
  • Pages.203-212
  • /
  • 2018
  • /
  • 2005-0461(pISSN)
  • /
  • 2287-7975(eISSN)
한국산업경영시스템학회 (Society of Korea Industrial and System Engineering)
권호 표지
DOI QR코드

DOI QR Code

품질손실을 고려한 경제적 CUSUM 관리도

A Design of Economic CUSUM Control Chart Incorporating Quality Loss Function

  • 김정대 (나사렛대학교 산학협력단)
  • Kim, Jungdae (Industry-Academy Cooperation Foundation, Korea Nazarene University)
  • 투고 : 2018.12.06
  • 심사 : 2018.12.18
  • 발행 : 2018.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Quality requirements of manufactured products or parts are given in the form of specification limits on the quality characteristics of individual units. If a product is to meet the customer's fitness for use criteria, it should be produced by a process which is stable or repeatable. In other words, it must be capable of operating with little variability around the target value or nominal value of the product's quality characteristic. In order to maintain and improve product quality, we need to apply statistical process control techniques such as histogram, check sheet, Pareto chart, cause and effect diagram, or control charts. Among those techniques, the most important one is control charting. The cumulative sum (CUSUM) control charts have been used in statistical process control (SPC) in industries for monitoring process shifts and supporting online measurement. The objective of this research is to apply Taguchi's quality loss function concept to cost based CUSUM control chart design. In this study, a modified quality loss function was developed to reflect quality loss situation where general quadratic loss curve is not appropriate. This research also provided a methodology for the design of CUSUM charts using Taguchi quality loss function concept based on the minimum cost per hour criterion. The new model differs from previous models in that the model assumes that quality loss is incurred even in the incontrol period. This model was compared with other cost based CUSUM models by Wu and Goel, According to numerical sensitivity analysis, the proposed model results in longer average run length in in-control period compared to the other two models.

키워드

참고문헌

  1. Collani, E., A simple procedure to determine the economic design of an x bar control chart, Journal of Quality Technology, 1986, Vol. 18, No. 3, pp. 145-151. https://doi.org/10.1080/00224065.1986.11979002
  2. Duncan, A.J., Quality control and industrial statistics, 5th edition, Irwin, Illinois, USA, 1986.
  3. Duncan, A.J., The economic design of X bar charts used to maintain current control of process, Journal of the American Statistical Association, 1956, Vol. 51, pp. 228-242.
  4. Ewan, W.D., When and how to use cusum charts, Technometrics, 1963, Vol. 5, No. 1, pp. 1-22. https://doi.org/10.1080/00401706.1963.10490055
  5. Ewan, W.D.,and Kemp, K. W.,Sampling inspection of continuous procesesses with autocorrelation between successive results, Biometrika, 1960, Vol. 47, pp. 363-380 https://doi.org/10.1093/biomet/47.3-4.363
  6. Gan, F.F., An optimal design of CUSUM quality control charts, Journal of Quality Technology, 1991, Vol. 23, No. 4, pp. 279-286. https://doi.org/10.1080/00224065.1991.11979343
  7. Goel, A.L. and Wu, S.M., Determination of A.R.L. and a contour nomogram for cusum charts to control normal means, Technometrics, 1971, Vol. 13, No. 2, pp. 221-230.
  8. Goel, A.L. and Wu, S.M., Economically optimum design of cusum charts, Management Science, 1973, Vol. 19, pp. 1271-1282. https://doi.org/10.1287/mnsc.19.11.1271
  9. Hawkins, D.M., Cumulative sum control charting: an underutilized spc tool, Quality Engineering, 1993, Vol. 5, No. 3, pp. 463-477. https://doi.org/10.1080/08982119308918986
  10. Himmelblau, D.M., Applied nonlinear programming, McGraw-Hill Inc., New York, USA, 1972.
  11. Ho, C. and Case, K., Economic design of control charts: a literature review for 1981-1991, Journal of Quality Technology, 1994, Vol. 26, No. 1, pp. 39-53. https://doi.org/10.1080/00224065.1994.11979497
  12. Johnson, N.L. and Leone, F.C., Cumulative sum control charts: Mathematical principles applied to construction and use, Part I, II, III, Industrial Quality Control, 1962, Vol. 18, pp. 15-36.
  13. Johnson, N.L., A simple theoretical approach to cumulative sum control charts, Journal of the American Statistical Association, 1961, Vol. 56, pp. 835-840. https://doi.org/10.1080/01621459.1961.10482129
  14. Jung, W., Redesign a Component of Automotive Propeller Shaft to Improve Productivity, Journal of Society of Korea Industrial and Systems Engineering, 2009, Vol. 32, No. 1, pp. 157-163.
  15. Kantorovich, L.V. and Krylov, V.I., Approximate methods of high analysis, Interscience Publishers, New York, NY, 1958.
  16. Kuester, J.L. and Mize, J.H., Optimization techniques with FORTRAN, McGraw-Hill Inc., New York, USA, 1973.
  17. Lorenzen, T.J. and Vance, L.C., The economic design of control charts: a unified approach, Technometrics, 1986, Vol. 28, No. 1 pp. 3-10. https://doi.org/10.1080/00401706.1986.10488092
  18. Lucas, J.M., The design and use of V mask control schemes, Journal of Quality Technology, 1976, Vol. 8, No. 1, pp. 1-12. https://doi.org/10.1080/00224065.1976.11980706
  19. Montgomery, D.C., Introduction to statistical quality control, 2nd edition, John Wiley and Sons, New York, USA, 1985.
  20. Page, E. S., Continuous inspection schemes, Biometrika, 1954, Vol. 41, pp. 100-115. https://doi.org/10.1093/biomet/41.1-2.100
  21. Taylor, H. M. The economic design of cumulative sum control charts, Technometrics, 1968, Vol. 10, pp. 479-488 https://doi.org/10.1080/00401706.1968.10490595
  22. Torng, J.C.-C., Cochran, J.K., Montgomery, D.C., and Lawraence, F.P., Implementing statistically constrained economic EWMA control charts, Journal of Quality Technology, 1995, Vol. 27, No. 4, pp. 402-402. https://doi.org/10.1080/00224065.1995.11979630
  23. Vance, L.C., Average run lengths of cumulative sum control charts for controlling normal means, Journal of Quality Technology, 1986, Vol. 18, No. 3, pp. 189-193. https://doi.org/10.1080/00224065.1986.11979008
  24. Wu, Z. and Tian, Y., Weighted-loss-function CUSUM chart for monitoring mean and variance of a production process, International Journal of Production Research, 2005, Vol. 43, pp. 3027-3044. https://doi.org/10.1080/00207540500057639