DOI QR코드

DOI QR Code

Freeze-thaw resistance and sorptivity of self-compacting mortar with ternary blends

  • Turk, Kazim (Department of Civil Engineering, Institute of Science and Technology, Inonu University, Engineering Faculty) ;
  • Kina, Ceren (Department of Civil Engineering, Institute of Science and Technology, Inonu University, Engineering Faculty)
  • Received : 2017.03.09
  • Accepted : 2017.10.11
  • Published : 2018.02.25

Abstract

This paper investigated the influence of binary and ternary blends of mineral admixtures in self-compacted mortar (SCM) on the fresh, mechanical and durability properties. For this purpose, 25 mortar mixtures were prepared having a total binder content of $640kg/cm^3$ and water/binder ratio between 0.41 and 0.50. All the mixtures consisted of Portland cement (PC), fly ash (FA) and silica fume (SF) as binary and ternary blends and air-entrained admixture wasn't used while control mixture contained only PC. The compressive and tensile strength tests were conducted for 28 and 91 days as well as slump-flow and V-funnel time tests whilst freeze-thaw (F-T) resistance and capillary water absorption tests were made for 91-day. Finally, in general, the use of SF with FA as ternary blends improved the tensile strength of mortars at 28- and 91-day while the use of SF15 with FA increased the compressive strength of the mortars compared to binary blends of FA. SCM mixtures with ternary blends had lower the sorptivity values than that of the mortars with binary blends of FA and the control mixture due to the beneficial properties of SF while the use of FA with SF as ternary blends induced the F-T resistance enhancement.

Keywords

References

  1. Aghabaglou, A.M., Cakir, O.A. and Ramyar, K. (2013), "Freezethaw resistance and transport properties of high-volume fly ash roller compacted concrete designed by maximum density method", Cement Concrete Compos., 37, 259-266. https://doi.org/10.1016/j.cemconcomp.2013.01.009
  2. Aghabaglou, A.M., Sezer, G.I. and Ramyar, K. (2014), "Comparison of fly ash, silica fume and metakaolin from mechanical properties and durability performance of mortar mixtures view point", Constr. Build. Mater., 70, 17-25. https://doi.org/10.1016/j.conbuildmat.2014.07.089
  3. Aitcin, P.C. and Vezina, D. (1884), "Resistance to freezing and thawing of silica fume concrete", Cement Concrete Aggre., 6(1), 38-42. https://doi.org/10.1520/CCA10352J
  4. ASTM C 150 (2002), Standard Specification for Portland Cement, Philadelphia, American Society for Testing and Materials.
  5. ASTM C 494 (2002), Standard Specification for Chemical Admixtures for Concrete, Philadelphia, American Society for Testing and Materials.
  6. ASTM C 666 (1997), Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing.
  7. Bartos, P.J.M. and Grauers, M. (1999), "Self-compacting concrete", Concrete, 33(4), 9-14.
  8. Bilodeau, A. and Malhotra, V.M. (2000), "High-volume fly ash system: concrete solution for sustainable development", ACI Mater. J., 97(1), 41-8.
  9. Bouzoubaa, N. and Lachemi, M. (2001), "Self-compacting concrete incorporating high volumes of class F fly ashpreliminary results", Cement Concrete Res., 31, 413-20. https://doi.org/10.1016/S0008-8846(00)00504-4
  10. Bouzoubaa, N., Fournier, B., Malhotra, V.M. and Golden, D.M. (2002), "Mechanical properties and durability of concrete made with high-volume fly ash blended cement produced in cement plant", ACI Mater. J., 99(6), 560-567.
  11. Caliskan, S. (2003), "Aggregate/mortar interface: influence of silica fume at the micro and macro-level", Cement Concrete Compos., 25, 557-64. https://doi.org/10.1016/S0958-9465(02)00095-1
  12. Carette, G.G. and Malhotra, V.M. (1983), "Mechanical properties, durability and drying shrinkage of Portland cement concrete containing silica fume", Cement Concrete Aggre., 5(1), 3-13. https://doi.org/10.1520/CCA10244J
  13. Cheng-yi, H. and Feldman, R.F. (1985), "Dependance of frost resistance on the pore structure of mortar containing silica fume", ACI J. Tech. P., 82(68), 765-774.
  14. Chung, C.W., Shon, C.S. and Kim, Y.S. (2010), "Chloride ion diffusivity of fly ash and silica fume concretes exposed to freeze-thaw cycles", Constr. Build. Mater., 24(9), 1739-1745. https://doi.org/10.1016/j.conbuildmat.2010.02.015
  15. Collepardi, M., Collepardi, S., Ogoumah Olagat, J. J. and Troli, R. (2003), "Laboratory-test and filled-experience SCC's", Proceedings of the 3rd International Symposium on Self Compacting Concrete, Reykjavik, Iceland.
  16. Collins, F. and Sanjayan, J.G. (1999), "Effects of ultra-fine materials on workability and strength of concrete containing alkali-activated slag as the binder", Cement Concrete Res., 29, 459-62. https://doi.org/10.1016/S0008-8846(98)00237-3
  17. Corinaldesi, V. and Moriconi, G. (2004), "Durable fiber reinforced self-compacting concrete", Cement Concrete Res., 34, 249-254. https://doi.org/10.1016/j.cemconres.2003.07.005
  18. EFNARC (2002), Specification and Guidelines for Self Compacting Concrete, http://www.efnarc.org.
  19. Erdogan, T.Y. (1997), Admixtures for Concrete, METU Press, Ankara, Turkey.
  20. FIP Commission on Concrete (1988), Condensed Silica Fume in Concrete, Thomas Telford, London.
  21. Fischer, G.L. and Prentice, B.A., Silberman, D., Ondov, J.M., Bierman, A.H., Ragiani, R.C. and McFarland, A.R. (1978), "Physical and morphological studies of size classified coal fly ash", Environ. Sci. Technol., 12(4), 447-451. https://doi.org/10.1021/es60140a008
  22. Gesoglu, M. and Ozbay, E. (2007), "The effects of mineral admixtures on fresh and hardened properties of self compacting concretes", Mater. Struct., 40, 923-937. https://doi.org/10.1617/s11527-007-9242-0
  23. Gesoglu, M., Guneyisi, E. and Ozbay, E. (2009), "Properties of self-compacting concretes made with binary, ternary, and quaternary cementitious blends of fly ash, blast furnace slag, and silica fume", Constr. Build. Mater., 23, 1847-54. https://doi.org/10.1016/j.conbuildmat.2008.09.015
  24. Goldman, A. and Bentur, A. (1993), "The influence of microfillers on enhancement of concrete strength", Cement Concrete Res., 23(4), 962-972. https://doi.org/10.1016/0008-8846(93)90050-J
  25. Grzeszczyk, S. and Lipowski, G. (1997), "Effect of content and particle size distribution of high-calcium fly ash on the rheological properties of cement pastes", Cement Concrete Res., 27, 907-16. https://doi.org/10.1016/S0008-8846(97)00073-2
  26. Guneyisi, E. and Gesoglu, M. (2008), "Properties of selfcompacting mortars with binary and ternary cementitious blends of fly ash and metakaolin", Mater. Struct., 41, 1519-31. https://doi.org/10.1617/s11527-007-9345-7
  27. Karakurt, C. and Bayazit, Y. (2015), "Freeze-thaw resistance of normal and high strength concretes produced with fly ash and silica fume", Adv. Mater. Sci. Eng., 830984, 1-8.
  28. Malhotra, V.M. (1987), Supplementary Cementing Materials For Concrete, Canadian Government Publishing Centre, Ottawa, Canada.
  29. Mindess, S., Young, J.F. and Darwin, D. (2003), Concrete, 2nd Edition, N.J., Prentice Hall.
  30. Naik, T.R., Kraus, R.N., Ramme, R.W. and Chun, Y.M. (2005), "Deicing salt-scaling resistance: laboratory and field evaluation of concrete containing up to 70% class C and class F fly ash", J. ASTM Int., 2(7), 93-104.
  31. Okamura, H. (1997), "Self-compacting high performance concrete", Concrete Int., 19(7), 50-4.
  32. Okamura, H.M. and Ouchi, M. (2003), "Self-compacting concrete", Adv. Concrete Technol., 1(1), 5-15. https://doi.org/10.3151/jact.1.5
  33. Ozawa, K., Maekawa, K., Kunishima, M. and Okamura, H. (1989), "Performance of concrete based on the durability design of concrete structures", Proceedings of the Second East Asia-Pacific Conference on Structural Engineering and Construction.
  34. Onat, O. and Celik, E. (2017), "An integral based fuzzy approach to evaluate waste materials for concrete", Smart Struct. Syst., 19(3), 323-333. https://doi.org/10.12989/sss.2017.19.3.323
  35. Pigeon, M. and Pleau, R. (1992), Durability of Concrete in Cold Climates, E&FN Spon, London.
  36. Sahmaran, M., Christianto, H.A. and Yaman, I.O. (2006), "The effect of chemical admixtures and mineral additives on the properties of self-compacting mortars", Cement Concrete Compos., 28, 432-440. https://doi.org/10.1016/j.cemconcomp.2005.12.003
  37. Siddique, R. (2013), "Compressive strength, water absorption, sorptivity, abrasion resistance and permeability of selfcompacting concrete containing coal bottom ash", Constr. Build. Mater., 47, 1444-1450. https://doi.org/10.1016/j.conbuildmat.2013.06.081
  38. Tasdemir, C. (2003), "Combined effects of mineral admixtures and curing conditions on the sorptivity coefficient of concrete", Cement Concrete Res., 33(10), 1637-1642. https://doi.org/10.1016/S0008-8846(03)00112-1
  39. Turk, K. (2012), "Viscosity and hardened properties of selfcompacting mortars with binary and ternary cementitious blends of fly ash and silica fume", Constr. Build. Mater., 37, 326-334. https://doi.org/10.1016/j.conbuildmat.2012.07.081
  40. Turk, K., Caliskan, S. and Yazicioglu, S. (2007), "Capillary water absorption of self-compacting concrete under different curing conditions", Ind. J. Eng. Mater. Sci., 14, 365-72.
  41. Turk, K., Karatas, M. and Gonen, T. (2013), "Effect of fly ash and silica fume on compressive strength, sorptivity and carbonation of SCC", KSCE J. Civil Eng., 17(1), 202-209. https://doi.org/10.1007/s12205-013-1680-3
  42. Wong, Y.L., Lam, L., Poon, C.S. and Zhou, F.P. (1999), "Properties of fly ash-modified cement mortar-aggregate interfaces", Cement Concrete Res., 29, 1905-13. https://doi.org/10.1016/S0008-8846(99)00189-1
  43. Yazici, H. (2008), "The effect of silica fume and high-volume Class C fly ash on mechanical properties, chloride penetration and freeze-thaw resistance of self-compacting concrete", Constr. Build. Mater., 22, 456-462. https://doi.org/10.1016/j.conbuildmat.2007.01.002

Cited by

  1. A Review of the Mechanical Properties and Durability of Ecological Concretes in a Cold Climate in Comparison to Standard Ordinary Portland Cement-Based Concrete vol.13, pp.16, 2020, https://doi.org/10.3390/ma13163467