DOI QR코드

DOI QR Code

Numerical analysis on tensile properties of composite hybrid bonded/bolted joints with flanging

  • Cheng, Xiaoquan (School of Aeronautic Science and Engineering, Beihang University) ;
  • Zhang, Jie (School of Aeronautic Science and Engineering, Beihang University) ;
  • Zhang, Jikui (School of Aeronautic Science and Engineering, Beihang University) ;
  • Liu, Peng (School of Aeronautic Science and Engineering, Beihang University) ;
  • Cheng, Yujia (School of Aeronautic Science and Engineering, Beihang University) ;
  • Xu, Yahong (Institute 306 of the 3rd Academy of CASIC)
  • 투고 : 2017.05.27
  • 심사 : 2017.10.12
  • 발행 : 2018.02.10

초록

A detailed study was carried out on the tensile properties of the single-lap joint of a steel panel bolted/bonded to a composite laminate with a flanging. Finite element model (FEM) was established to predict the strength and to analyze the damage propagation of the hybrid joints by ABAQUS/Standard, which especially adopted cohesive elements to simulate the interface between the laminate and adhesive. The strength and failure mode predicted by FEM were in good agreement with the experimental results. In addition, three influence factors including adhesive thickness, bolt preload and bolt-hole clearance were studied. The results show that the three parameters have effect on the first drop load of the load-displacement curve, but the effect of bolt-hole clearance is the largest. The bolt-hole clearance should be avoided for hybrid joints.

키워드

참고문헌

  1. Abaqus-Inc. (2012), Abaqus User Manual, Version 6.11; Dassault Systemes Simulia Corp., Paris, France.
  2. Aghaei, M., Forouzan, M.R., Nikforouz, M. and Shahabi, E. (2015), "A study on different failure criteria to predict damage in glass/polyester composite beams under low velocity impact", Steel Compos. Struct., Int. J., 18(5), 1291-1303. https://doi.org/10.12989/scs.2015.18.5.1291
  3. Bodjona, K. and Lessard, L. (2015), "Load sharing in single-lap bonded/bolted composite joints. Part II: Global sensitivity analysis", Compos. Struct., 129, 276-283. https://doi.org/10.1016/j.compstruct.2015.03.069
  4. Bodjona, K., Raju, K., Lim, G.H. and Lessard, L. (2015), "Load sharing in single-lap bonded/bolted composite joints. Part I: Model development and validation", Compos. Struct., 129, 268-275. https://doi.org/10.1016/j.compstruct.2015.04.040
  5. Bois, C., Wargnier, H., Wahl, J.C. and Goff, E.L. (2013), "An analytical model for the strength prediction of hybrid (bolted/bonded) composite joints", Compos. Struct., 97, 252-260. https://doi.org/10.1016/j.compstruct.2012.10.022
  6. Chowdhury, N. (2016), "Static and fatigue testing bolted, bonded and hybrid step lap joints of thick carbon fibre/epoxy laminates used on aircraft structures", Compos. Struct., 142, 96-106. https://doi.org/10.1016/j.compstruct.2016.01.078
  7. Chowdhury, N., Chiu, W.K., Wang, J. and Chang, P. (2015), "Static and fatigue testing thin riveted, bonded and hybrid carbon fiber double lap joints used in aircraft structures", Compos. Struct., 121, 315-323. https://doi.org/10.1016/j.compstruct.2014.11.004
  8. Fan, J.F., Cheng, X.Q., Wang, S.W., Guo, X. and Zhang, T. (2015), "Experimental and numerical investigation of composite bolted pi-joint subjected to bending load", Compos. Part B: Eng., 78, 324-330. https://doi.org/10.1016/j.compositesb.2015.03.094
  9. Hart-Smith, L.J. (1982), "Design methodology for bonded-bolted composite joints", Report No. AFWAL-TR-81-3154; Douglas Aircraft Company, CA, USA.
  10. Hart-Smith, L.J. (1985), "Bonded-bolted composite joints", J. Aircraft, 22(11), 993-1000. https://doi.org/10.2514/3.45237
  11. Kallmeyer, A.R. and Stephen, R.I. (1999), "Finite element model for predicting time-dependent deformations and damage accumulation in laminated composite bolted joints", J. Compos. Mater., 33(9), 794-826. https://doi.org/10.1177/002199839903300902
  12. Kelly, G. (2005), "Load transfer in hybrid (bonded/bolted) composite single-lap joints", Compos. Struct., 69(1), 35-43 https://doi.org/10.1016/j.compstruct.2004.04.016
  13. Kelly, G. (2006), "Quasi-static strength and fatigue life of hybrid (bonded/bolted) composite single-lap joints", Compos. Struct., 72(1), 110-129
  14. Kharazan, M., Sadr, M.H. and Kiani, M. (2014), "Delamination growth analysis in composite laminates subjected to low velocity impact", Steel Compos. Struct., Int. J., 17(4), 307-403.
  15. Kweon, J.H., Jung, J.W., Kim, T.H. and Choi, J.H. (2006), "Failure of carbon composite-to-aluminum joints with combined mechanical fastening and adhesive bonding", Compos. Struct., 75(1-4), 192-198. https://doi.org/10.1016/j.compstruct.2006.04.013
  16. Lee, Y.H., Lim, D.W., Choi, J.H. and Kweon, J.H. (2010), "Failure load evaluation and prediction of hybrid composite double lap joints", Compos. Struct., 92(12), 2916-2926. https://doi.org/10.1016/j.compstruct.2010.05.002
  17. Liu, P., Cheng, X.Q., Wang, S.W., Liu, S.F. and Cheng, Y.J. (2016), "Numerical analysis of bearing failure in countersunk composite joints using 3D explicit simulation method", Compos. Struct., 138, 30-39. https://doi.org/10.1016/j.compstruct.2015.11.058
  18. Liu, S.F., Cheng, X.Q., Zhang, Q., Zhang, J., Bao, J.W. and Guo, X. (2016), "An investigation of hygrothermal effects on adhesive materials and double lap shear joints of CFRP composite laminates", Compos. Part B: Eng., 91, 431-440. https://doi.org/10.1016/j.compositesb.2016.01.051
  19. Marannano, G. and Zuccarello, B. (2015), "Numerical experimental analysis of hybrid double lap aluminum-CFRP joints", Compos. Part B: Eng., 71, 28-39. https://doi.org/10.1016/j.compositesb.2014.11.025
  20. Nuismer, R.J. and Whitney, J.M. (1975), "Uniaxial failure of composite laminates containing stress concentration", ASTM STP 593.
  21. Reddy, Y.S. and Reddy, J.N. (1993), "Three-Dimensional Finite Element Progressive Failure Analysis of Composite Laminates under Axial Extension", Compos. Technol. Res., 15(2), 73-87. https://doi.org/10.1520/CTR10358J
  22. Reifsnider, K. and Case, S. (2000), "The mechanics of composite strength evolution", Compos. Sci. Technol., 60(12-13), 2539-2546. https://doi.org/10.1016/S0266-3538(00)00047-6
  23. Wang, S.W., Cheng, X.Q., Guo, X., Li, X. and Chen, G. (2016), "Influence of lateral displacement of the grip on single lap composite-to-aluminum bolted joints", Exp. Mech., 56(3), 407-417. https://doi.org/10.1007/s11340-015-0110-5
  24. Xiao, Y. and Takashi, I. (2005), "Bearing strength and failure behavior of bolted composite joints (part II: modeling and simulation)", Compos. Sci. Technol., 65(7-8), 1032-1043. https://doi.org/10.1016/j.compscitech.2004.12.049

피인용 문헌

  1. Effect of curing condition on mechanical properties of scarf-repaired composite laminates vol.37, pp.4, 2018, https://doi.org/10.12989/scs.2020.37.4.419
  2. Tensile performances of single-lap countersunk composite joints with metallic bushing vol.40, pp.3, 2021, https://doi.org/10.12989/scs.2021.40.3.421