DOI QR코드

DOI QR Code

Evaluation of performance of piled-raft foundations on soft clay: A case study

  • Khanmohammadi, Mohammadreza (Department of Civil and Environmental Engineering, Amirkabir University of Technology) ;
  • Fakharian, Kazem (Department of Civil and Environmental Engineering, Amirkabir University of Technology)
  • Received : 2016.12.01
  • Accepted : 2017.06.22
  • Published : 2018.01.20

Abstract

Applicability of constructing piled raft foundations on soft clay has been given attention in recent years. Lack of sufficient stiffness for soil and thus excessive settlements to allow higher contribution of piles is the major concern in this regard. This paper presents a numerical investigation of performance of piled-raft foundations on soft clay with focusing on a case study. A 3D FEM numerical model is developed using ABAQUS. The model was calibrated by comparing physical and numerical modeling results of other researchers. Then the possibility of using piled-raft system in construction of foundation for a water storage tank in Sarbandar, Iran is assessed. Soil strength parameters in the numerical model were calibrated using the instrumentation data of a heavily instrumented preloading project at the construction site. The results indicate that choosing the proper combination of length and spacing for piles can lead to acceptable differential and total settlements while a high percentage of total bearing capacity of piles can be mobilized, which is an efficient solution for the project. Overall, the construction of piled-rafts on soft clays is promising as long as the total settlement of the structure is not imposing restrictions such as the common 25 mm allowable settlement. But instead, if higher allowable settlements are adopted, for example in the case of rigid steel tanks, the method shall be applicable with considerable cost savings.

Keywords

References

  1. Al-Omari, R.R., Al-Azzawi, A.A. and AlAbbas, K.A. (2016), "Behavior of piled rafts overlying a tunnel in sandy soil", Geomech. Eng., 10(5), 599-615. https://doi.org/10.12989/gae.2016.10.5.599
  2. Ata, A., Badrawi, E. and Nabil, M. (2015), "Numerical analysis of unconnected piled raft with cushion", Ain Shams Eng. J., 6(2), 421-428. https://doi.org/10.1016/j.asej.2014.11.002
  3. Cho, J., Lee, J.H., Jeong, S. and Lee, J. (2012), "The settlement behavior of piled raft in clay soils", Ocean Eng., 53, 153-163. https://doi.org/10.1016/j.oceaneng.2012.06.003
  4. Chore, H. and Siddiqui, M. (2016), "Soil-structure interaction analysis of a building frame supported on piled raft", Coupled Syst. Mech., 5(1), 41-58. https://doi.org/10.12989/csm.2016.5.1.041
  5. Davis, E. and Poulos, H. (1972), "The analysis of piled raft systems", Austr. Geotech. J., 2(1), 21-27.
  6. Fakharian, K. and Javanbakht, A.S. (2012), "Effect of soil improvement on performance of piled rafts on soft soils", Proceedings of the 9th International Conference on Testing and Design Methods for Deep Foundations, Kanazawa, Japan, September.
  7. Fakharian, K. and Khanmohammadi, M. (2012), "Evaluation of the effect of geometric characteristics of a piled-raft on its behavior on soft clay under drained conditions", Sharif Civil Eng. J., 29(2), 71-76.
  8. Fattah, M.Y., Al-Mosawi, M.J. and Al-Zayadi, A.A. (2013), "Time dependent behavior of piled raft foundation in clayey soil", Geomech. Eng., 5(1), 17-36. https://doi.org/10.12989/gae.2013.5.1.017
  9. Fattah, M.Y., Yousif, M.A. and Al-Tameemi, S.M. (2015), "Effect of pile group geometry on bearing capacity of piled raft foundations", Struct. Eng. Mech., 54(5), 829-853. https://doi.org/10.12989/sem.2015.54.5.829
  10. Hibbitt, D., Karlsson, B. and Sorensen, P. (2001), Abaqus/Standard User's Manual, Hibbitt, Karlsson and Sorensen Inc., Pawtucket, Rhode Island, U.S.A.
  11. Hight, D. and Green, P. (1976), "The performance of a piled raft foundation for a tall building in London", Proceedings of the 6th European Conference on Soil Mechanics and Foundation Engineering, Vienna, Austria.
  12. Hooper, J. (1973), "Observations on the behavior of a pile-raft foundation on London clay", Proc. Inst. Civ. Eng., 55(4), 855-877.
  13. Horikoshi, K. and Randolph, M. (1996), "Centrifuge modelling of piled raft foundations on clay", Geotechnique, 46(4), 741-752. https://doi.org/10.1680/geot.1996.46.4.741
  14. Horikoshi, K. and Randolph, M. (1998), "A contribution to optimum design of piled rafts", Geotechnique, 48(3), 301-317. https://doi.org/10.1680/geot.1998.48.3.301
  15. Katzenbach, R., Arslan, U., Moormann, C. and Reul, O. (1998), "Piled raft foundation-interaction between piles and raft", Darmstadt Geotech., 4(2), 279-296.
  16. Kim, K.N., Lee, S.H., Kim, K.S., Chung, C.K., Kim, M.M. and Lee, H.S. (2001), "Optimal pile arrangement for minimizing differential settlements in piled raft foundations", Comput. Geotech., 28(4), 235-253. https://doi.org/10.1016/S0266-352X(01)00002-7
  17. Lee, C., Bolton, M. and Al-Tabbaa, A. (2002), "Numerical modelling of group effects on the distribution of dragloads in pile foundations", Geotechnique, 52(5), 325-335. https://doi.org/10.1680/geot.52.5.325.38704
  18. Lee, J., Kim, Y. and Jeong, S. (2010), "Three-dimensional analysis of bearing behavior of piled raft on soft clay", Comput. Geotech., 37(1), 103-114. https://doi.org/10.1016/j.compgeo.2009.07.009
  19. Lee, J., Park, D. and Choi, K. (2014), "Analysis of load sharing behavior for piled rafts using normalized load response model", Comput. Geotech., 57, 65-74. https://doi.org/10.1016/j.compgeo.2014.01.003
  20. Leung, Y., Klar, A. and Soga, K. (2009), "Theoretical study on pile length optimization of pile groups and piled rafts", J. Geotech. Geoenviron. Eng., 136(2), 319-330. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000206
  21. Masouleh, S.F. and Fakharian, K. (2008), "Application of a continuum numerical model for pile driving analysis and comparison with a real case", Comput. Geotech., 35(3), 406-418. https://doi.org/10.1016/j.compgeo.2007.08.009
  22. Nakanishi, K. and Takewaki, I. (2013), "Optimum pile arrangement in piled raft foundation by using simplified settlement analysis and adaptive step-length algorithm", Geomech. Eng., 5(6), 519-540. https://doi.org/10.12989/gae.2013.5.6.519
  23. Poulos, H.G. (2001), "Piled raft foundations: design and applications", Geotechnique, 51(2), 95-113. https://doi.org/10.1680/geot.51.2.95.40292
  24. Poulos, H.G. (1994), "An approximate numerical analysis of pileraft interaction", J. Numer. Anal. Met. Geomech., 18(2), 73-92. https://doi.org/10.1002/nag.1610180202
  25. Poulos, H.G. (2005), Piled Raft and Compensated Piled Raft Foundations for Soft Soil Sites, Advances in Designing and Testing Deep Foundations, 214-235.
  26. Randolph, M. (1992), "Design methods for pile groups and piled rafts", Proceedings of the International Conference on Soil Mechanics and Geotechnical Engineering, New Delhi, India, January.
  27. Sawant, V., Pawar, S. and Ladhane, K. (2012), "Parametric study of piled raft for three load-patterns", Coupled Syst. Mech., 1(2), 115-131. https://doi.org/10.12989/csm.2012.1.2.115
  28. Tan, Y., Chow, C. and Gue, S. (2005), "Piled raft with different pile length for medium-rise buildings on very soft clay", Proceeding of the International conference on Soil mechanics and Geotechnical Engineering, Osaka, Japan, September.
  29. Yamashita, K., Hamada, J. and Tanikawa, T. (2016), "Static and seismic performance of a friction piled raft combined with gridform deep mixing walls in soft ground", Soil. Found., 56(3), 559-573. https://doi.org/10.1016/j.sandf.2016.04.020

Cited by

  1. Behavior of a combined piled raft foundation in a multi-layered soil subjected to vertical loading vol.21, pp.4, 2020, https://doi.org/10.12989/gae.2020.21.4.379
  2. Measurements and analysis of load sharing between piles and raft in a pile foundation in clay vol.24, pp.6, 2021, https://doi.org/10.12989/gae.2021.24.6.559
  3. Assessment of ultimate load of drilled shaft socketed in rocks based on pile load tests vol.26, pp.3, 2018, https://doi.org/10.12989/gae.2021.26.3.215