DOI QR코드

DOI QR Code

Behavior of steel-concrete composite cable anchorage system

  • Gou, Hongye (Department of Bridge Engineering, School of Civil Engineering, Southwest Jiaotong University) ;
  • Wang, Wei (Department of Civil, Architectural, and Environmental Engineering, Missouri University of Science and Technology) ;
  • Shi, Xiaoyu (Department of Bridge Engineering, School of Civil Engineering, Southwest Jiaotong University) ;
  • Pu, Qianhui (Department of Bridge Engineering, School of Civil Engineering, Southwest Jiaotong University) ;
  • Kang, Rui (Department of Bridge Engineering, School of Civil Engineering, Southwest Jiaotong University)
  • 투고 : 2017.06.23
  • 심사 : 2017.11.30
  • 발행 : 2018.01.10

초록

Steel-concrete composite structure is widely applied to bridge engineering due to their outstanding mechanical properties and economic benefit. This paper studied a new type of steel-concrete composite anchorage system for a self-anchored suspension bridge and focused on the mechanical behavior and force transferring mechanism. A model with a scale of 1/2.5 was prepared and tested in ten loading cases in the laboratory, and their detailed stress distributions were measured. Meanwhile, a three-dimensional finite element model was established to understand the stress distributions and validated against the experimental measurement data. From the results of this study, a complicated stress distribution of the steel anchorage box with low stress level was observed. In addition, no damage and cracking was observed at the concrete surrounding this steel box. It can be concluded that the composite effect between the concrete surrounding the steel anchorage box and this steel box can be successfully developed. Consequently, the steel-concrete composite anchorage system illustrated an excellent mechanical response and high reliability.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China, Central Universities

참고문헌

  1. AISC (2010), Load and resistance factor design (LRFD) specification for structural steel buildings, Chicago, IL.
  2. Allahyari, H., Dehestani, M., Beygi, M.H., Neya, B.N. and Rahmani, E. (2014), "Mechanical behavior of steel-concrete composite decks with perfobond shear connectors", Steel Compos. Struct., 17(3), 339-358. https://doi.org/10.12989/scs.2014.17.3.339
  3. Cheng, B., Wang, J.L. and Li, C. (2013), "Compression behaviour of perforated plates in steel tower anchorage zones of cablestayed bridge", J. Constr Steel Res., 90, 72-84. https://doi.org/10.1016/j.jcsr.2013.07.020
  4. Choi, D.H., Gwon, S.G. and Na, H.S. (2014), "Simplified analysis for preliminary design of towers in suspension bridges", J. Bridge Eng., 19(3), 04013007. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000551
  5. Cui, K., Yang, W.H. and Gou, H.Y., (2017a), "Experimental research and finite element analysis on the dynamic characteristics of concrete steel bridges with multi-cracks", J. Vibroeng., 19, 4198-4209. https://doi.org/10.21595/jve.2017.18084
  6. Cui, K., Zhao, T.T. and Gou, H.Y. (2017b), "Numerical study on parameter impact on fundamental frequencies and dynamic characteristics of pre-stressed concrete beams", J. Vibroeng., 19, 1680-1696. https://doi.org/10.21595/jve.2017.18114
  7. Gil, H. and Choi, Y. (2001), "Cable erection test at pylon saddle for spatial suspension bridge", J. Bridge Eng., 6(3), 183-188. https://doi.org/10.1061/(ASCE)1084-0702(2001)6:3(183)
  8. Gil, H. and Choi, Y. (2002), "Cable erection test at splay band for spatial suspension bridge", J. Bridge Eng., 7(5), 300-307. https://doi.org/10.1061/(ASCE)1084-0702(2002)7:5(300)
  9. Gou, H.Y., Long, H., Bao, Y., Chen, G.D., Pu, Q.H. and Kang, R. (2017a), "Experimental and numericalstudies on stress distributions in girder-arch-pier connections of long-span continuous rigid frame arch railway bridge", J. Bridge Eng. (accepted)
  10. Gou, H.Y., Pu, Q.H., Zhou, Y. and Hong, Y. (2015), "Arch-tobeam rigidity analysis for V-shaped rigid frame composite arch bridges", Steel Compos. Struct., 19(2), 405-416. https://doi.org/10.12989/scs.2015.19.2.405
  11. Gou, H.Y., Shi, X.Y., Zhou, W., Cui, K. and Pu, Q.H. (2017b), "Dynamic performance of continuous railway bridges: Numerical analyses and field tests", Proc. IMechE. Part F: J. Rail Rap. Tran., DOI: 10.1177/0954409717702019.
  12. Gunaydin, M., Adanur, S. Altunisik, A.C., Sevim, B. and Turker, E. (2014), "Determination of structural behavior of Bosporus suspension bridge considering construction stages and different soil conditions", Steel Compos. Struct., 17(4), 405-429. https://doi.org/10.12989/scs.2014.17.4.405
  13. Hu, J.H., Xiang, J.J. and Liao, J.H. (2004), "Conceptual design of a single-tower self-anchored suspension bridge: Scheme design of Foshan Pingsheng Bridge", Proceedings of the 16th National Bridge Academic Conference, Beijing, China.
  14. Ju, X.C. and Zeng, Z.B. (2015), "Study on uplift performance of stud connector in steel-concrete composite structures", Steel Compos. Struct., 18(5), 1279-1290. https://doi.org/10.12989/scs.2015.18.5.1279
  15. Jung, M.R., Shin, S.U., Attard, M.M. and Kim, M.Y. (2014), "Deflection theory for self-anchored suspension bridges under live load", J. Bridge Eng., 20(7), 1-19.
  16. Kim, H.K., Leeb, M.J. and Chang, S.P. (2006), "Determination of hanger installation procedure for a self-anchored suspension bridge", Eng. Struct., 28, 959-976. https://doi.org/10.1016/j.engstruct.2005.10.019
  17. Lin, Z.F., Liu, Y.Q. and He, J. (2015), "Static behaviour of lying multi-stud connectors in cable-pylon anchorage zone", Steel Compos. Struct., 18(6), 1369-1389. https://doi.org/10.12989/scs.2015.18.6.1369
  18. Lonetti, P. and Pascuzzo, A. (2014), "Design analysis of the optimum configuration of self-anchored cable-stayed suspension bridges", Struct. Eng. Mech., 51(5), 1-20. https://doi.org/10.12989/sem.2014.51.1.001
  19. Lu, P., Chen, J., Zhong, J. and Lu, P. (2014), "Optimization analysis model of self-anchored suspension bridge", Math. Prob. Eng., 2014, 1-8.
  20. Nie, J.G., Tao, M.X. and Fan, J.S. (2011), "Research on cable anchorage systems for self-anchored suspension bridges with steel box girders", J. Bridge Eng., 16(5), 633-643. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000190
  21. Papastergiou, D. and Lebet, J.P. (2014), "Investigation of a new steel-concrete connection for composite bridges", Steel Compos. Struct., 17(5), 573-599. https://doi.org/10.12989/scs.2014.17.5.573
  22. Qiu, W., Jiang, M. and Zhang, Z. (2009), "Research on limit span of self-anchored suspension bridge", Comput. Struct. Eng., 1173-1180.
  23. Qiu, W.L., Jiang, M. and Zhang, Z. (2014), "Responses of selfanchored suspension bridge to sudden breakage of hangers", Struct. Eng. Mech., 50(2), 241-255. https://doi.org/10.12989/sem.2014.50.2.241
  24. Raftoyiannis, I.G. and Michaltsos, G.T. (2016), "Movable anchorage systems for vibration control of stay-cables in bridges", Eng. Struct., 112, 162-171. https://doi.org/10.1016/j.engstruct.2016.01.014
  25. Shao, X.D., Deng, J., Li, L.F. and Jiang, Z.X. (2006), "Cable anchorage structure of self-anchored suspension bridge", China Civil Eng. J., 39(7), 81-87. (in Chinese)
  26. Su, Q.T., Yang, G.T., Qin, F. and Wu, C. (2012), "Investigation on the horizontal mechanical behaviour of steel-concrete composite cable-pylon anchorage", J. Constr. Steel Res., 72, 267-275. https://doi.org/10.1016/j.jcsr.2012.01.004
  27. Sun, J., Manzanarez, R. and Nader, M. (2002), "Design of looping cable anchorage system for new San Francisco-Oakland Bay Bridge main suspension span", J. Bridge Eng., 7(6), 315-324. https://doi.org/10.1061/(ASCE)1084-0702(2002)7:6(315)
  28. Sun, J., Manzanarez, R. and Nader, M. (2004), "Suspension cable design of the new San Francisco-Oakland Bay Bridge", J. Bridge Eng., 9(1), 101-106. https://doi.org/10.1061/(ASCE)1084-0702(2004)9:1(101)
  29. Votsis, R.A., Stratford, T.J., Chryssanthopoulos, M.K. and Tantele, E.A. (2017), "Dynamic assessment of a FRP suspension footbridge through field testing and finite element modelling", Steel Compos. Struct., 23(2), 205-215. https://doi.org/10.12989/scs.2017.23.2.205
  30. Xu, F.Y., Zhang, M.J., Wang, L. andZhang Z. (2017), "Selfanchored suspension bridges in China", Pract. Period. Struct. Des. Constr., 22(1), 04016018. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000304

피인용 문헌

  1. Footbridge Serviceability Analysis: From System Identification to Tuned Mass Damper Implementation vol.23, pp.2, 2018, https://doi.org/10.1007/s12205-018-0985-7
  2. Research on static and dynamic behaviors of PC track beam for straddle monorail transit system vol.31, pp.5, 2018, https://doi.org/10.12989/scs.2019.31.5.437
  3. Finite element analysis of long-span rail-cum-road cable-stayed bridge subjected to ship collision vol.22, pp.11, 2018, https://doi.org/10.1177/1369433219846953
  4. Dynamic behavior of hybrid framed arch railway bridge under moving trains vol.15, pp.8, 2018, https://doi.org/10.1080/15732479.2019.1594314
  5. Early-age tensile creep and shrinkage-induced cracking in internally restrained concrete members vol.71, pp.22, 2018, https://doi.org/10.1680/jmacr.18.00038
  6. An analytical solution to the vibration characteristics for continuous girder bridge-track coupling system and its application vol.77, pp.5, 2018, https://doi.org/10.12989/sem.2021.77.5.601
  7. In-situ dynamic loading test of a hybrid continuous arch bridge vol.77, pp.6, 2018, https://doi.org/10.12989/sem.2021.77.6.809