DOI QR코드

DOI QR Code

Influence of high temperature on mechanical properties of concrete containing recycled fine aggregate

  • Liang, Jiong-Feng (State Key Laboratory Breeding Base of Nuclear Resources and Environment, East China Institute of Technology) ;
  • Wang, En (Faculty of Civil and Architecture Engineering, East China Institute of Technology) ;
  • Zhou, Xu (Faculty of Civil and Architecture Engineering, East China Institute of Technology) ;
  • Le, Qiao-Li (Faculty of Civil and Architecture Engineering, East China Institute of Technology)
  • 투고 : 2016.11.11
  • 심사 : 2017.11.15
  • 발행 : 2018.01.25

초록

This paper presents the results of an experimental study to investigate the influences of high temperatures on the mechanical properties of concrete containing recycled fine aggregate. A total of 150 concrete prisms ($100{\times}100{\times}300mm$) and 150 concrete cubes ($100{\times}100{\times}100mm$) are cast and heated under five different temperatures ($20^{\circ}C$, $200^{\circ}C$, $400^{\circ}C$, $600^{\circ}C$, $800^{\circ}C$) for test. The results show that the mass loss, compressive strength, elastic modulus, splitting tensile strength of concrete specimens containing recycled fine aggregate decline significantly as the temperature rise. At the same temperature, the compressive strength, splitting tensile strength, elastic modulus of concrete specimens containing recycled coarse aggregate and recycled fine aggregate (RHC) is lower than that of concrete specimens containing natural coarse aggregate and recycled fine aggregate (RFC). The shape of stress-strain curves of concrete specimens at different temperatures is different, and the shape of that become flatter as the temperature rises. Normal concrete has better energy absorption capacity than concrete containing recycled fine aggregate.

키워드

과제정보

연구 과제 주관 기관 : Chinese National Natural Science Foundation, Natural Science Foundation of Jiangxi Province

참고문헌

  1. Ajdukiewicz, A. and Kliszczewicz, A. (2002), "Influence of recycled aggregates on mechanical properties of HS/HPC", Cement Concrete Compos., 24(2), 269-279. https://doi.org/10.1016/S0958-9465(01)00012-9
  2. Chen, G.M., He, Y.H., Yang, H., Chen, J.F. and Guo, Y.C. (2014), "Compressive behavior of steel fiber reinforced recycled aggregate concrete after exposure to elevated temperatures", Constr. Build. Mater., 111(15), 363-378.
  3. Choi, W.C. and Yun, H.D. (2012), "Compressive behavior of reinforced concrete columns with recycled aggregate under uniaxial loading", Eng. Struct., 41, 285-293. https://doi.org/10.1016/j.engstruct.2012.03.037
  4. Cree, D., Green, M. and Noumowe, A. (2013), "Residual strength of concrete containing recycled materials after exposure to fire: a review", Constr. Build. Mater., 45, 208-223. https://doi.org/10.1016/j.conbuildmat.2013.04.005
  5. Evangelista, L. and de Brito, J. (2009), "Durability performance of concrete made with fine recycled concrete aggregates", Cement Concrete Compos., 31(8), 564-569. https://doi.org/10.1016/j.cemconcomp.2008.12.011
  6. Fan, C.C., Huang, R., Hwang, H. and Chao, S.J. (2016), "Properties of concrete incorporating fine recycled aggregates from crushed concrete wastes", Constr. Build. Mater., 112(1), 708-715. https://doi.org/10.1016/j.conbuildmat.2016.02.154
  7. Farhad, A. and Bijan, S. (2015), "Predicting the bond between concrete and reinforcing steel at elevated temperatures", Struct. Eng. Mech., 48(5), 643-660. https://doi.org/10.12989/SEM.2013.48.5.643
  8. Gonzalez, V.C.L. and Moriconi, G. (2015), "The influence of recycled concrete aggregates on the behavior of beam-column joints under cyclic loading", Eng. Struct., 60, 148-154.
  9. Katkhuda, H. and Shatarat, N. (2016), "Shear behavior of reinforced concrete beams using treated recycled concrete aggregate", Constr. Build. Mater., 125, 63-71. https://doi.org/10.1016/j.conbuildmat.2016.08.034
  10. Kou, S.C. and Poon, C.S. (2012), "Enhancing the durability properties of concrete prepared with coarse recycled aggregate", Constr. Build. Mater., 35, 69-76. https://doi.org/10.1016/j.conbuildmat.2012.02.032
  11. Kou, S.C., Poon, C.S. and Etxeberria, M. (2011), "Influence of recycled aggregates on long term mechanical properties and pore size distribution of concrete", Cement Concrete Compos., 33(2), 286-291. https://doi.org/10.1016/j.cemconcomp.2010.10.003
  12. Laneyrie, C., Beaucour, A.L., Green, M.F., Hebert, R.L., Ledesert, B. and Noumowe, A. (2016), "Influence of recycled coarse aggregates on normal and high performance concrete subjected to elevated temperatures", Constr. Build. Mater., 111(15), 363-378.
  13. Lau, A. and Anson, M. (2006), "Effect of high temperatures on high performance steel fibre reinforced concrete", Cement Concrete Res., 36(9), 1698-1707. https://doi.org/10.1016/j.cemconres.2006.03.024
  14. Liu Q., Xiao, J.Z. and Sun, Z. (2011), "Experimental study on the failure mechanism of recycled concrete", Cement Concrete Res., 41(10), 1050-1057. https://doi.org/10.1016/j.cemconres.2011.06.007
  15. Ma, H., Xue, J.Y., Liu, Y.H. and Zhang, X.C. (2015), "Cyclic loading tests and shear strength of steel reinforced recycled concrete short columns", Eng. Struct., 92, 55-68. https://doi.org/10.1016/j.engstruct.2015.03.009
  16. Mohammad, R.I., Rami, H.H. and Hanadi, A. (2015), "Postheating behavior of concrete beams reinforced with fiber reinforced polymer bars", Struct. Eng. Mech., 53(6), 1253-1269. https://doi.org/10.12989/sem.2015.53.6.1253
  17. Nataraja, M.C., Dhang, N. and Gupta, A.P. (1999). "Stress-strain curves for steel-fiber reinforced concrete under compression", Cement Concrete Compos., 21(5), 383-390. https://doi.org/10.1016/S0958-9465(99)00021-9
  18. Padmini, A.K., Ramamurthy, K. and Mathews, M.S. (2009), "Influence of parent concrete on the properties of recycled aggregate concrete", Constr. Build. Mater., 23(2), 829-836. https://doi.org/10.1016/j.conbuildmat.2008.03.006
  19. Pedro, D., de Brito, J. and Evangelista, L. (2017), "Structural concrete with simultaneous incorporation of fine and coarse recycled concrete aggregates: Mechanical, durability and longterm properties", Constr. Build. Mater., 154(15), 294-309. https://doi.org/10.1016/j.conbuildmat.2017.07.215
  20. Poon, C.S., Kou, S.C. and Lam, L. (2002), "Use of recycled aggregates in molded concrete bricks and blocks", Constr. Build. Mater., 16(5), 281-289. https://doi.org/10.1016/S0950-0618(02)00019-3
  21. Raizal, S.M.R. and Riyad, S.A. (2014), "Analytical model for CFRP strengthened circular RC column under elevated temperature", Comput. Concrete, 13(4), 517-529. https://doi.org/10.12989/cac.2014.13.4.517
  22. Sagoe-Crentsil, K.K., Brown, T. and Taylor, A.H. (2001), "Performance of concrete made with commercially produced coarse recycled concrete aggregate", Cement Concrete Res., 31(5), 707-712. https://doi.org/10.1016/S0008-8846(00)00476-2
  23. Standard for test method of basic properties of construction moatar in china (JGT/T70-2009) (2009), Chinese Building Construction Publishing Press, Beijing. (in Chinese)
  24. Tam, V.W.Y., Gao, X.F. and Tam, C.M. (2005), "Microstructural analysis of recycled aggregate concrete produced from twostage mixing approach", Cement Concrete Res., 35(6), 1195-1203. https://doi.org/10.1016/j.cemconres.2004.10.025
  25. Vieira, J.P.B., Correia, J.R. and De Brito, J. (2011), "Post-fire residual mechanical properties of concrete made with recycled concrete coarse aggregates", Cement Concrete Res., 41(5), 533-541. https://doi.org/10.1016/j.cemconres.2011.02.002
  26. Vinay Kumar, B.M., Ananthan, H. and Balaji, K.V.A. (2017), "Experimental studies on utilization of recycled coarse and fine aggregates in high performance concrete mixes", Alex. Eng. J., https://doi.org/10.1016/j.aej.2017.05.003.
  27. Xiao, J.Z. and Zhang, C.Z. (2007), "Fire damage and residual strengths of recycled aggregate concrete", Key Eng. Mater., 348, 937-940.
  28. Xiao, J.Z., Li, J. and Zhang, C. (2005), "Mechanical properties of recycled aggregate concrete under uniaxial loading", Cement Concrete Res., 35(6), 1187-1194. https://doi.org/10.1016/j.cemconres.2004.09.020
  29. Xiao, J.Z., Li, W.G. and Fan, Y.H. (2012), "An overview of study on recycled aggregate concrete in China (1996-2011)", Constr. Build. Mater., 31, 364-383. https://doi.org/10.1016/j.conbuildmat.2011.12.074
  30. Yang, H.F., Qin, Y.H., Liao, Y. and Chen, W. (2016), "Shear behavior of recycled aggregate concrete after exposure to high temperatures", Constr. Build. Mater., 106(1), 374-381. https://doi.org/10.1016/j.conbuildmat.2015.12.103
  31. Yang, Y.F. and Han, L.H. (2006), "Experimental behaviour of recycled aggregate concrete filled steel tubular columns", J. Constr. Steel Res., 62(12), 1310-1324. https://doi.org/10.1016/j.jcsr.2006.02.010
  32. Yu, K.Q. and Lu, Z.D. (2015), "Influence of softening curves on the residual fracture toughness of post-fire normal-strength concrete", Comput. Concrete, 15(2), 199-213. https://doi.org/10.12989/cac.2015.15.2.199
  33. Zega, C.J. and Di Maio, A.A. (2006), "Recycled concrete exposed to high temperatures", Mag. Concrete Res., 58(10), 675-682. https://doi.org/10.1680/macr.2006.58.10.675
  34. Zega, C.J. and Di Maio, A.A. (2009), "Recycled concrete made with different natural coarse aggregates exposed to high temperature", Constr. Build. Mater., 23(5), 2047-2052. https://doi.org/10.1016/j.conbuildmat.2008.08.017
  35. Zhao, Z.F., Remond, S., Damidot, D. and Xu, W. (2015), "Influence of fine recycled concrete aggregates on the properties of mortars", Constr. Build. Mater., 81(15), 179-186. https://doi.org/10.1016/j.conbuildmat.2015.02.037

피인용 문헌

  1. Bond Behavior of CRACFST Columns after Exposure to Elevated Temperatures vol.2019, pp.None, 2018, https://doi.org/10.1155/2019/4873451
  2. Bond Behavior between Steel Rebar and RCA Concrete after Exposure to Elevated Temperatures vol.2020, pp.None, 2018, https://doi.org/10.1155/2020/5230295
  3. Experimental investigation on hardened properties of recycled coarse aggregate concrete vol.10, pp.5, 2020, https://doi.org/10.12989/acc.2020.10.5.369
  4. Compressive Mechanical Properties of a Novel Recycled Aggregate Concrete with Recycled Lightweight Aggregate vol.2021, pp.None, 2018, https://doi.org/10.1155/2021/2134082
  5. Trilinear tensile stress–strain constitutive model for high ductility cementitious composite with totally recycle fine aggregate vol.319, pp.None, 2022, https://doi.org/10.1016/j.conbuildmat.2021.126149