DOI QR코드

DOI QR Code

Predicted of hydration heat and compressive strength of limestone cement mortar with different type of superplasticizer

  • Didouche, Zahia (Department of Civil Engineering, Hassiba Benbouali University) ;
  • Ezziane, Karim (Department of Civil Engineering, Hassiba Benbouali University) ;
  • Kadri, El-Hadj (Mechanical Laboratory and Materials of Civil Engineering, L2MGC, Cergy Pontoise University)
  • 투고 : 2018.01.28
  • 심사 : 2018.12.06
  • 발행 : 2018.12.25

초록

The use of some superplasticizers in the production of mortar or concrete influences the hydration kinetic and the amount of total heat. This results in a modification of some properties, namely mortar workability, mechanical strength and durability. Three superplasticizers were used; a polynaphthalenesulfonate (PNS), a melamine resin (PMS) and a polycarboxylate (PC). They have been incorporated into various amount in a standardized mortar based on limestone cement. The aim of this study was to evaluate the rheological, mechanical and Calorimeters properties of this mortar. This will select the most compatible product and more able to be used depending on the climate of the country and the cement used. The PNS is incompatible with this type of cement registering a decrease of strength but the PMS and the PC modify the kinetics of hydration with significant heat generation and improved mechanical strength. The measured heat flow is significantly influenced by the type and dosage of superplasticizer especially for low dosage. Hydration heat and compressive strength of the different mixtures can be evaluated by determining their ultimate values and ages to reach these values where the correlation coefficients are very satisfactory.

키워드

참고문헌

  1. Adjoudj, M., Ezziane, K., Kadri, E.H., Ngo, T.T. and Kaci, A. (2014), "Evaluation of rheological parameters of mortar containing various amounts of mineral addition with polycarboxylate superplasticizer", Constr. Build. Mater., 70, 549-559 https://doi.org/10.1016/j.conbuildmat.2014.07.111
  2. Anagnostopoulos, C.A. (2014), "Effect of different superplasticizers on the physical and mechanical properties of cement grouts", Constr. Build.Mater., 50, 162-168. https://doi.org/10.1016/j.conbuildmat.2013.09.050
  3. ASTM C 230-83 (1983), Flow Table to Use in Tests of Hydraulic Cement.
  4. ASTM C1074-93 (1993), Standard Practice for Estimating Concrete Strength by the Maturity Method, ASTM International, West Conshohocken, PA.
  5. Bjornstrom, J. and Chandra, S. (2003), "Effect of superplasticizers on the rheological properties of cements", Mater. Struct., 36(10), 685-692. https://doi.org/10.1007/BF02479503
  6. Brandstetr, J., Polcer, J., Kratky, J., Holesinsky, R. and Havlica J. (2001), "Possibilities of use of isoperibolic calorimetry for assessing the hydration behavior of cementitious systems", Cement Concrete Res., 31(6), 941-947. https://doi.org/10.1016/S0008-8846(01)00495-1
  7. Burgos-Montes, O., Palacios, M., Rivilla, P. and Puertas, F. (2012), "Compatibility between superplasticizer admixtures and cements with mineral additions", Constr. Build. Mater., 31, 300-309. https://doi.org/10.1016/j.conbuildmat.2011.12.092
  8. EN P-196-1 (1987), Methodes d'essais des ciments, determination des resistances mecaniques.
  9. Eren, O. (2002), "Strength development of concrete with ordinary portland cement, slag or fly ash and cured at different temperature", Mater. Struct., 35(9), 536-540. https://doi.org/10.1007/BF02483121
  10. Ezziane, K., Kadri, E.H., Bougara, A. and Bennacer, R. (2010), "Analysis of mortars long term strength with supplementary cementitious materials cured at different temperatures", ACI Mater. J., 107(4), 323-331.
  11. Hallal, A., Kadri, E.H., Ezziane, K., Kadri, A. and Khelafi, H. (2010), "Combined effect of mineral admixtures with superplasticizers on the fluidity of the blended cement paste", Constr. Build. Mater., 24(8), 1418-1423. https://doi.org/10.1016/j.conbuildmat.2010.01.015
  12. Kadri, E.H. and Duval, R. (2009), "Hydration heat kinetics of concrete with silica fume", Constr. Build. Mater., 23(11), 3388-3392. https://doi.org/10.1016/j.conbuildmat.2009.06.008
  13. Knapen, E. and Van Gemert D. (2009), "Cement hydration and microstructure formation in the presence of water-soluble polymers)", Cement Concrete Res., 39(1),6-13. https://doi.org/10.1016/j.cemconres.2008.10.003
  14. Lothenbach, B., Le Saout, G., Gallucci, E. and Scrivener, K. (2008), "Influence of limestone on the hydration of Portland cements", Cement Concrete Res., 38(6), 848-860. https://doi.org/10.1016/j.cemconres.2008.01.002
  15. Mehdipour, I., Kumar, A. and Khayat, K.H. (2017), "Rheology, hydration, and strength evolution of interground limestone cement containing PCE dispersant and high volume supplementary cementitious materials", Mater. Des., 127(5), 54-66 https://doi.org/10.1016/j.matdes.2017.04.061
  16. Menendez, G., Bonavetti, V. and Irassar, E.F. (2001), "Strength development of ternary blended cement with limestone filler and blast-furnace slag", Cement Concrete Compos., 25(1), 61-67. https://doi.org/10.1016/S0958-9465(01)00056-7
  17. Mounanga, P., Khokhar, M.I.A., El Hachem, R. and Loukili, A. (2011), "Improvement of the early-age reactivity of fly ash and blast furnace slag cementations systems using limestone filler", Mater. Struct., 44(2), 437-453. https://doi.org/10.1617/s11527-010-9637-1
  18. NF P-15-436 (1988), Measurement of Heat of Hydration of Cement by Semi-adiabatic Calorimeter (Langavant Calorimetry Method).
  19. NF P 15-403 (1996), Sable Normal, Mortier Normal, AFNOR, Paris, France.
  20. Pirazzoli, I., Alesiani, M., Capuani, S., Maraviglia, B., Giorgi, R., Ridi, F. and Baglioni, P. (2005), "The influence of superplasticizers on the first steps of tricalcium silicate hydration studied by NMR techniques", Mag. Res. Imag., 23(2), 277-284. https://doi.org/10.1016/j.mri.2004.11.024
  21. Plank, J. and Hirsch, C. (2007), "Impact of zeta potential of early cement hydration phases on superplasticzier adsorption", Cement Concrete Res., 37, 537-542. https://doi.org/10.1016/j.cemconres.2007.01.007
  22. Puertas, F., Santos, H., Palacios, M. and Martinez-Ramirez, S. (2005), "Polycarboxylate superplasticiser admixtures: effect on hydration, microstructure and rheological behaviour in cement pastes", Adv. Cement Res., 17(2), 77-89. https://doi.org/10.1680/adcr.2005.17.2.77
  23. Shin, J.Y., Hong, J.S., Suh, J.K. and Lee, Y.S. (2008), "Effects of polycarboxylate-type superplasticizer on fluidity and hydration behaviour of cement paste", Korean J. Chem. Eng., 25(6), 1553-1561. https://doi.org/10.1007/s11814-008-0255-3
  24. Tikkanen, J., Cwirzen, A. and Pentalla, V. (2014), "Effects of mineral powders on hydration process and hydration products in normal strength concrete", Constr. Build. Mater., 72, 7-14. https://doi.org/10.1016/j.conbuildmat.2014.08.066
  25. Tsivilis, S., Chaniotakis, E., Kakali, G. and Batis, G. (2002), "An analysis of the properties of Portland limestone cements and concrete", Cement Concrete Compos., 24(3-4), 371-378. https://doi.org/10.1016/S0958-9465(01)00089-0
  26. Uchikawa, H., Hanebar, S. and Sawaki, S. (1997), "The role of steric repulsive force in the dispersion of cement particles in fresh paste prepared with organic admixtures", Cement Concrete Res., 27, 37-50. https://doi.org/10.1016/S0008-8846(96)00207-4
  27. Yahia, A., Tanimura, M. and Shimoyama Y. (2005), "Reological properties of highly flowable mortar containing limestone filler-effect of powder content and w/c ratio", Cement Concrete Res., 35(3), 532-539. https://doi.org/10.1016/j.cemconres.2004.05.008
  28. Yousuf, F., Wei, X. and Tao, J. (2017), "Evaluation of the influence of a superplasticizer on the hydration of varying composition cements by the electrical resistivity measurement method", Constr. Build. Mater., 144, 25-34 https://doi.org/10.1016/j.conbuildmat.2017.03.138
  29. Zhang, G., Li, G. and Li, Y. (2016), "Effects of superplasticizers and retarders on the fluidity and strength of sulphoaluminate cement", Constr. Build. Mater., 126, 44-54 https://doi.org/10.1016/j.conbuildmat.2016.09.019
  30. Zhang, Y. and Kong, X. (2015), "Correlations of the dispersing capability of NSF and PCE types of superplasticizer and their impacts on cement hydration with the adsorption in fresh cement pastes", Cement Concrete Res., 69, 1-9. https://doi.org/10.1016/j.cemconres.2014.11.009
  31. Zhang, Y., Kong, X.M., Lu, Z.B., Lu, Z.C. and Hou, S.S. (2015), "Effects of the charge characteristics of polycarboxylate superplasticizers on the adsorption and the retardation in cement pastes", Cement Concrete Res., 67, 184-196. https://doi.org/10.1016/j.cemconres.2014.10.004
  32. Zhang, Y., Sun, W. and Liu, S. (2002), "Study on the hydration heat of binder paste in high-performance concrete", Cem. Conc. Res., 32, 1483-1488. https://doi.org/10.1016/S0008-8846(02)00810-4
  33. Zhao, L., Guo, X., Ge, C., Li, Q., Guo, L., Shu, X. and Liu, J. (2017), "Mechanical behavior and toughening mechanism of polycarboxylate superplasticizer modified graphene oxide reinforcedcement composites", Compos. Part B Eng., 113, 308-316. https://doi.org/10.1016/j.compositesb.2017.01.056
  34. Zingg, A., Winnefeld, F., Holzer, L., Pakusch, J., Becker, S., Figi, R. and Gauckler, L. (2009), "Interaction of polycarboxylate-based superplasticizers with cements containing different C3A amounts", Cement Concrete Compos., 31(3), 153-162. https://doi.org/10.1016/j.cemconcomp.2009.01.005

피인용 문헌

  1. Evaluation of mathematical models for prediction of slump, compressive strength and durability of concrete with limestone powder vol.10, pp.6, 2018, https://doi.org/10.12989/acc.2020.10.6.463
  2. A PSO-ANN Intelligent Hybrid Model to Predict the Compressive Strength of Limestone Fillers Roller Compacted Concrete (RCC) to Build Dams vol.25, pp.8, 2018, https://doi.org/10.1007/s12205-021-1531-6