DOI QR코드

DOI QR Code

Influence of granulated blast furnace slag as fine aggregate on properties of cement mortar

  • 투고 : 2017.11.25
  • 심사 : 2018.11.08
  • 발행 : 2018.12.25

초록

The objective of present study is to investigate the effect of granulated blast furnace slag (GBS) as partial substitution of natural sand on behaviour of cement mortar. For this, the methods of factorial design with water cement (w/c) ratio and incorporation percentages of GBS as replacement of natural fine aggregate i.e., GBS(%) as factors are followed. The levels of factor w/c ratio are fixed at 0.4, 0.45, and 0.5 and the levels of factor GBS(%) are kept fixed as 0%, 20%, 40%, 60%, 80% and 100%. The compressive strength (CS) of mortar after 3, 7, 14, 28, 56 and 90 days, and water absorption (WA) are chosen as responses of the study. Analysis of variance (ANOVA) of experimental results has been carried out and those are illustrated by ANOVA tables, main effect and interaction plots. The results of study depict that the selected factors have substantial influence on the strength and WA of mortar. However, the interaction of factors has no substantial impact on CS and WA of mixes.

키워드

참고문헌

  1. Alqadi, A.N., Mustapha, K.N.B., Naganathan, S. and Al-Kadi, Q.N. (2013), "Development of self-compacting concrete using contrast constant factorial design", J. King Saud Univ.-Eng. Sci., 25(2), 105-112. https://doi.org/10.1016/j.jksues.2012.06.002
  2. Ambily, P.S., Umarani, C., Ravisankar, K., Prem, P.R., Bharatkumar, B.H. and Iyer, N.R. (2015), "Studies on ultra high performance concrete incorporating copper slag as fine aggregate", Constr. Build. Mater., 77, 233-240. https://doi.org/10.1016/j.conbuildmat.2014.12.092
  3. Ashish, D.K., Singh, B. and Verma, S.K. (2016), "The effect of attack of chloride and sulphate on ground granulated blast furnace slag concrete", Adv. Concrete Constr., 4(2), 101-121.
  4. Babu, J. and Mahendran, N. (2014), "Experimental studies on concrete replacing fine aggregate with blast furnace slags", Int. J. Eng. Trend. Technol., 10(8), 1-3. https://doi.org/10.14445/22315381/IJETT-V10P201
  5. Binici, H., Aksogan, O., Gorur, E.B., Kaplan, H. and Bodur, M.N. (2008), "Performance of ground blast furnace slag and ground basaltic pumice concrete against seawater attack", Constr. Build. Mater., 22(7), 1515-1526. https://doi.org/10.1016/j.conbuildmat.2007.03.024
  6. Binici, H., Aksogan, O., Gorur, E.B., Kaplan, H. and Bodur, M.N. (2009), "Hydro-abrasive erosion of concrete incorporating ground blast-furnace slag and ground basaltic pumice", Constr. Build. Mater., 23(2), 804-811. https://doi.org/10.1016/j.conbuildmat.2008.03.003
  7. Binici, H., Durgun, M.Y., Rizaoglu, T. and Kolucolak, M. (2012), "Investigation of durability properties of concrete pipes incorporating blast furnace slag and ground basaltic pumice as fine aggregates", Scientia Iranica, 19(3), 366-372. https://doi.org/10.1016/j.scient.2012.04.007
  8. Chithra, S., Kumar, S.S. and Chinnaraju, K. (2016), "The effect of Colloidal Nano-silica on workability, mechanical and durability properties of High Performance Concrete with Copper slag as partial fine aggregate", Constr. Build. Mater., 113, 794-804. https://doi.org/10.1016/j.conbuildmat.2016.03.119
  9. Chunlin, L., Kunpeng, Z. and Depeng, C. (2011), "Possibility of concrete prepared with steel slag as fine and coarse aggregates: a preliminary study", Procedia Eng., 24, 412-416. https://doi.org/10.1016/j.proeng.2011.11.2667
  10. Correia, S.L., Souza, F.L., Dienstmann, G. and Segadaes, A.M. (2009), "Assessment of the recycling potential of fresh concrete waste using a factorial design of experiments", Waste Manage., 29(11), 2886-2891. https://doi.org/10.1016/j.wasman.2009.06.014
  11. Ding, Y.C., Cheng, T.W., Liu, P.C. and Lee, W.H. (2017), "Study on the treatment of BOF slag to replace fine aggregate in concrete", Constr. Build. Mater., 146, 644-651. https://doi.org/10.1016/j.conbuildmat.2017.04.164
  12. dos Anjos, M.A.G., Sales, A.T.C. and Andrade, N. (2017), "Blasted copper slag as fine aggregate in Portland cement concrete", J. Environ. Manage., 196, 607-613. https://doi.org/10.1016/j.jenvman.2017.03.032
  13. Farooq, M.A., Sato, Y., Ayano, T. and Niitani, K. (2017), "Experimental and numerical investigation of static and fatigue behavior of mortar with blast furnace slag sand as fine aggregates in air and water", Constr. Build. Mater., 143, 429-443. https://doi.org/10.1016/j.conbuildmat.2017.03.147
  14. IS 2386 (1963), Indian Standard Methods of Test for Aggregates for Concrete: Part 3 Determination of Specific Gravity, Density, Voids, Absorption and Bulking, Bureau of Indian Standards, New Delhi, India.
  15. IS 383 (1970), Indian Standard Specification for Coarse and Fine Aggregates from Natural Sources for Concrete, bureau of Indian standards, New Delhi, India.
  16. IS 4031 (1988), Indian Standard Method of Physical Tests for Hydraulic Cement: Part 6 Determination of Compressive Strength of Cement Other than Masonry Cement, Bureau of Indian Standards, New Delhi, India.
  17. IS 8112 (1959), Indian Standard Specification 43 Grade Ordinary Portland Cement Specification, Bureau of Indian Standards, New Delhi, India.
  18. Kehagia, F. (2009), "Skid resistance performance of asphalt wearing courses with electric arc furnace slag aggregates", Waste Manage. Res., 27(3), 288-294. https://doi.org/10.1177/0734242X08092025
  19. Kockal, N.U. (2016), "Investigation about the effect of different fine aggregates on physical, mechanical and thermal properties of mortars", Constr. Build. Mater., 124, 816-825. https://doi.org/10.1016/j.conbuildmat.2016.08.008
  20. Lee, B.J., Prabhu, G.G., Lee, B.C. and Kim, Y.Y. (2016), "Eco-friendly porous concrete using bottom ash aggregate for marine ranch application", Waste. Manage. Res., 34(3), 214-224. https://doi.org/10.1177/0734242X15620006
  21. Lin, K.L., Wang, K.S., Tzeng, B.Y. and Lin, C.Y. (2003), "Hydraulic activity of cement mixed with slag from vitrified solid waste incinerator fly ash", Waste Manage. Res., 21(6), 567-574. https://doi.org/10.1177/0734242X0302100609
  22. Lopez-Gayarre, F., Serna, P., Domingo-Cabo, A., Serrano-Lopez, M.A. and Lopez-Colina, C. (2009), "Influence of recycled aggregate quality and proportioning criteria on recycled concrete properties", Waste Manage., 29(12), 3022-3028. https://doi.org/10.1016/j.wasman.2009.07.010
  23. Mithun, B.M. and Narasimhan, M.C. (2016), "Performance of alkali activated slag concrete mixes incorporating copper slag as fine aggregate", J. Clean. Prod., 112, 837-844. https://doi.org/10.1016/j.jclepro.2015.06.026
  24. Montgomery, D.C. (2010), Design and Analysis of Experiments, WileyIndia, NewDelhi.
  25. Mukharjee, B.B. and Barai, S.V. (2014a), "Assessment of the influence of Nano-Silica on the behavior of mortar using factorial design of experiments", Constr. Build. Mater., 68, 416-425. https://doi.org/10.1016/j.conbuildmat.2014.06.074
  26. Mukharjee, B.B. and Barai, S.V. (2014b), "Statistical techniques to analyze properties of nano-engineered concrete using Recycled Coarse Aggregates", J. Clean. Prod., 83, 273-285. https://doi.org/10.1016/j.jclepro.2014.07.045
  27. Mukharjee, B.B. and Barai, S.V. (2015b), "Characteristics of sustainable concrete incorporating recycled coarse aggregates and colloidal nano-silica", Adv. Concrete Constr., 3(3), 187-202. https://doi.org/10.12989/ACC.2015.3.3.187
  28. Mukharjee, B.B. and Barai, S.V. (2015b), "Development of construction materials using nano-silica and aggregates recycled from construction and demolition waste", Waste Manage. Res., 33(6), 515-523. https://doi.org/10.1177/0734242X15584840
  29. Nehdi, M.L. and Summer, J. (2002), "Optimization of ternary cementitious mortar blends using factorial experimental plans", Mater. Struct., 35(8), 495-503. https://doi.org/10.1007/BF02483137
  30. Neville, A.M. (1997), Properties of Concrete, 4th and Final Edition, Pearson Education Limited. Harlow, United Kingdom.
  31. Pal, S.C., Mukherjee, A. and Pathak, S.R. (2003), "Investigation of hydraulic activity of ground granulated blast furnace slag in concrete", Cement Concrete Res., 33(9), 1481-1486. https://doi.org/10.1016/S0008-8846(03)00062-0
  32. Pang, B., Zhou, Z. and Xu, H. (2015), "Utilization of carbonated and granulated steel slag aggregate in concrete", Constr. Build. Mater., 84, 454-467. https://doi.org/10.1016/j.conbuildmat.2015.03.008
  33. Patra, R.K. and Mukharjee, B.B. (2016), "Fresh and hardened properties of concrete incorporating ground granulated blast furnace slag-A review", Adv. Concrete Constr., 4(4), 283-303. https://doi.org/10.12989/acc.2016.4.4.283
  34. Patra, R.K. and Mukharjee, B.B. (2017a), "Influence of incorporation of granulated blast furnace slag as replacement of fine aggregate on properties of concrete", J. Clean. Prod., 165, 468-476. https://doi.org/10.1016/j.jclepro.2017.07.125
  35. Patra, R.K. and Mukharjee, B.B. (2017b), "Properties of concrete incorporating granulated blast furnace slag as fine aggregate", Adv. Concrete Constr., 5(5), 437-450. https://doi.org/10.12989/acc.2017.5.5.437
  36. Rashad, A.M., Sadek, D.M. and Hassan, H.A. (2016), "An investigation on blast-furnace stag as fine aggregate in alkali-activated slag mortars subjected to elevated temperatures", J. Clean. Prod., 112, 1086-1096. https://doi.org/10.1016/j.jclepro.2015.07.127
  37. Senff, L., Hotza, D., Repette, W.L., Ferreira, V.M. and Labrincha, J.A. (2010), "Mortars with nano-$SiO_2$ and micro-$SiO_2$ investigated by experimental design", Constr. Build. Mater., 24(8), 1432-1437. https://doi.org/10.1016/j.conbuildmat.2010.01.012
  38. Shu, C.Y., Kuo, W.T. and Juang, C.U. (2016), "Analytical model of expansion for electric arc furnace oxidizing slag-containing concrete", Comput. Concrete, 18(5), 937-950. https://doi.org/10.12989/CAC.2016.18.5.937
  39. Singh, G. and Siddique, R. (2016), "Strength properties and micro-structural analysis of self-compacting concrete made with iron slag as partial replacement of fine aggregates", Constr. Build. Mater., 127, 144-152. https://doi.org/10.1016/j.conbuildmat.2016.09.154
  40. Singh, G., Das, S., Ahmed, A.A., Saha, S. and Karmakar, S. (2015), "Study of Granulated Blast Furnace Slag as Fine Aggregates in Concrete for Sustainable Infrastructure", Procedia-Social Behavioral Sci., 195, 2272-2279. https://doi.org/10.1016/j.sbspro.2015.06.316
  41. Topcu, I.B. and Boga, A.R. (2010), "Effect of boron waste on the properties of mortar and concrete", Waste Manag. Res., 28(7), 626-633. https://doi.org/10.1177/0734242X09345561
  42. Valcuende, M., Benito, F., Parra, C. and Minano, I. (2015), "Shrinkage of self-compacting concrete made with blast furnace slag as fine aggregate", Constr. Build. Mater., 76, 1-9. https://doi.org/10.1016/j.conbuildmat.2014.11.029
  43. Yuksel, I., Bilir, T. and Ozkan, O. (2007), "Durability of concrete incorporating non-ground blast furnace slag and bottom ash as fine aggregate", Build. Environ., 42(7), 2651-2659. https://doi.org/10.1016/j.buildenv.2006.07.003
  44. Zeghichi, L. (2006), "The effect of replacement of naturals aggregates by slag products on the strength of concrete", Asian J. Civ. Eng., 7(1), 27-35.

피인용 문헌

  1. Potential valorisation of ferrous slag in the treatment of water and wastewater: A review vol.8, pp.1, 2018, https://doi.org/10.12989/aer.2019.8.1.055
  2. Comparison of the effect of lithium bentonite and sodium bentonite on the engineering properties of bentonite-cement-sodium silicate grout vol.9, pp.3, 2020, https://doi.org/10.12989/acc.2020.9.3.279