References
- B. D. Freeman, Basis of permeability/selectivity tradeoff relations in polymeric gas separation membrane, Macromolecules, 32, 375-380 (1999).
- L. M. Robeson, Correlation of separation factor versus permeability for polymeric membranes, J. Membr. Sci., 62, 165-185 (1991).
- F. Peng, L. Lu, H. Sun, Y. Wang, J. Liu, and Z. Jiang, Hybrid organic-inorganic membrane: solving the trade-off between permeability and selectivity, Chem. Mater., 17, 6790-6796 (2005).
- L. M. Robeson, The upper bound revisited, J. Membr. Sci., 320, 390-400 (2008).
- Y. Shen and A. C. Lua, Preparation and characterization of mixed matrix membranes based on PVDF and three inorganic filler (fumed nonporous silica, zeolite 4A and mesoporous MCM-41) for gas separation, Chem. Eng. J., 192, 201-210 (2012).
- R. S. Murali, A. F. Ismail, M. A. Rahman, and S. Sridhar, Mixed matrix membranes of Pebax-1657 loaded with 4A zeolite for gaseous separations, Sep. Purif. Technol., 129, 1-8 (2014).
- R. Mahajan and W. J. Koros, Mixed matrix membrane materials with glassy polymers. Part 1., Polym. Eng. Sci., 42, 1420-1431 (2002).
- A. F. Ismail, N. H. Rahim, A. Mustafa, T. Matsuura, B. C. Ng, S. Abdullah, and S. A. Hashemifard, Gas separation performance of polyethersulfone/multi-walled carbon nanotubes mixed matrix membranes, Sep. Purif. Technol., 80, 20-31 (2011).
- H. Cong, J. Zhang, M. Radosz, and Y. Shen, Carbon nanotube composite membranes of brominated poly(2,6-diphenyl-1,4-phenylene oxide) for gas separation, J. Membr. Sci., 294, 178-185 (2007).
- L. Ge, Z. Zhu, and V. Rudolph, Enhanced gas permeability by fabricating functionalized multi-walled carbon nanotubes and polyethersulfone nanocomposite membrane, Sep. Purif. Technol., 78, 76-82 (2011).
- H. W. Yoon, H. D. Lee, and H. B. Park, Gas transport behavior of modified carbon nanotubes/hydrogel composite membranes, Membr. J., 23(5), 375-383 (2013).
- Y. Xie, P. R. Chang, S. Wang, J. Yu, and X. Ma, Preparation and properties of halloysite nanotubes/plasticized Dioscorea opposita Thunb. starch composites, Carbohydr. Polym., 83, 186-191 (2011).
- R. T. Silva, P. Pasbakhsh, K. L. Goh, S. P. Chai, and H. Ismail, Physico-chemical characterisation of chitosan/halloysite composite membranes, Polym. Test., 32, 265-271 (2013).
- R. S. Murali, M. Padaki, T. Matsuura, M. S. Abdullah, and A. F. Ismail, Polyaniline in situ modified halloysite nanotubes incorporated asymmetric mixed matrix membrane for gas separation, Sep. Purif. Technol., 132, 187-194 (2014).
- Y. Joo, Y. Jeon, S. U. Lee, J. H. Sim, J. Ryu, S. Lee, H. Lee, and D. Sohn, Aggregation and stabilization of carboxylic acid functionalized halloysite nanotubes, J. Phys. Chem. C, 116, 18230-18235 (2012).
- S. Deng, J. Zhang, L. Ye, and J. Wu, Toughening epoxies with halloysite naotubes, Polymer, 49, 5119-5127 (2008).
- M. Du, B. Guo, and D. Jia, Thermal stability and flame retardant effects of halloysite nanotubes on poly(propylene), Eur. Polym. J., 42, 1362-1369 (2006).
- M. Du, B. Guo, Y. Lei, M. Liu, and D. Jia, Carboxylated butadiene-styrene rubber/halloysite nanotube nanocomposites: interfacial interaction and performance, Polymer, 49, 4871-4876 (2008).
- K. Hedicke-Hochstotter, G. T. Lim, and V. Altstadt, Novel polyamide nanocomposites based on silicate nanotubes of the mineral halloysite, Compos. Sci. Technol., 69, 330-334 (2009).
- P. Pasbakhsh, H. Ismail, M. N. A. Fauzi, and A. A. Bakar, EPDM/modified halloysite nanocomposites, Appl. Clay Sci., 48, 405-413 (2010).
- C. M. Atayde and I. Doi, Highly stable hydrophilic surfaces of PDMS thin layer obtained by UV radiation and oxygen plasma treatments, Phys. Status Solidi C, 7, 189-192 (2010).
-
R. D. Raharjo, B. D. Freeman, D. R. Paul, G. C. Sarti, and E. S. Sanders, Pure and mixed gas
$CH_4$ and$n-C_4H_{10}$ permeability and diffusivity in poly(dimethylsiloxane), J. Membr. Sci., 306, 75-92 (2007). - T. C. Merkel, R. P. Gupta, B. S. Turk, and B. D. Freeman, Mixed-gas permeation of syngas components in poly(dimethylsiloxane) and poly(1-trimethylsiyl-1-propyne) at elevated temperature, J. Membr. Sci., 191, 85-94 (2001).
- M. Sadrzadeh, K. Shahidi, and T. Mohammadi, Effect of operating parameters on pure and mixed gas permeation properties of a synthesized composite PDMS/PA membrane, J. Membr. Sci., 342, 327-340 (2009).
- G. Defontaine, A. Barichard, S. Letaief, C. Feng, T. Matsuura, and C. Detellier, Nanoporous polymer-clay hybrid membrane for gas separation, J. Colloid Interface Sci., 343, 622-627 (2010).
-
M. Nour, K. Berean, S. Balendhran, J. Z. Ou, J. D. Plessis, C. McSweeney, M. Bhaskaran, S. Sriram, and K. Kalantar-zaden, CNT/PDMS composite membranes for
$H_2$ and$CH_4$ gas separation, Int. J. Hydrogen Energy, 38, 10494-10501 (2013). - M. Nour, K. Berean, M. J. Griffin, G. I. Matthews, M. Bhaskaran, S. Sriram, and K. Kalantar-zadeh, Nanocomposite carbon-PDMS membranes for gas separation, Sens. Actuators B, 161, 982-988 (2012).
- T. C. Merkel, V. I. Bondar, K. Nagai, B. D. Freeman, and I. Pinnau, Gas sorption, diffusion, and permeation in poly(dimethylsiloxane), J. Polym. Sci. B, 38, 415-434 (2000).
- S. A. Hashemifard, A. F. Ismail, and T. Matsuura, Mixed matrix membrane incorporated with large pore size halloysite nanotubes (HNT) as filler for gas separation, J. Colloid Interface Sci., 359, 359-370 (2011).
-
C. K. Yeom, S. H. Lee, and J. M. Lee, Study of transport of pure and mixed
$CO_2$ /$N_2$ gases through polymeric membranes, J. Appl. Polym. Sci., 78, 179-189 (2000).