참고문헌
- Kim, T. H., Jang, J. H., Lee, D. G., Kim, L. S., Lyu, S. K., Study on Optimal Design and Analysis of Worm Gear Reducer for High Place Operation Car, Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 6, pp. 98-103, 2015. https://doi.org/10.14775/ksmpe.2015.14.6.098
- Jung, J. W., Kim, K. P., Ji, H. C., Moon, T. S., Design Improvement of the Driving Bevel Gear in Transmissions of a Tracked Vehicle, Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 2, pp. 1-6, 2015. https://doi.org/10.14775/ksmpe.2015.14.2.001
- Kang, J. H., Kim, J. S, Lyu, S. K., "A Study on the Relation Between Backlash and Tooth Contact for Optimization of the Conical Gear Marine Gearbox", Proc. of KSMPE, pp. 52-60, 2014.
- Yeh, T. J., "Modeling and Robust Control of Worm-gear driven Systems" , Simul. Model. Pract. Theory 17 (5) : 767-777, 2009. https://doi.org/10.1016/j.simpat.2009.01.002
- Simon, V. V., Influence of Tooth Errors and Shaft Misalignments on Loaded Tooth Contact in Cylindrical Worm Gears, Mech. Mach. Theory 41 (6) : 707- 724, 2006. https://doi.org/10.1016/j.mechmachtheory.2005.09.004
- Litvin, F. L., Reduction of Noise of Loaded and Unloaded Misaligned Gear Drives, Comput. Meth. Appl. Mech. Eng. 195 (41-43) : 5523-5536, 2006. https://doi.org/10.1016/j.cma.2005.05.055
- Lee, H. W. and Park, N. G., "A Study on Development of Railway Reducer for Low Noise/Vibration", J. Korean Soc. Precis. Eng., Vol. 21, No. 2, pp. 130-137, 2004.
- Mohan, L. V., Geometrical Aspects of Double Enveloping Worm Gear Drive, Mech. Mach. Theory 44 (11) : 2053-2065, 2009. https://doi.org/10.1016/j.mechmachtheory.2009.05.008
- Shi, W., Meshing Control of the Double-Enveloping Hourglass Worm Gearing under the Conditions of Existing the Errors and the Load, Mech. Mach. Theory 39 (1) : 61-74, 2004. https://doi.org/10.1016/S0094-114X(03)00104-6
- Lee, D. G., No, S. Y., Ahn, D. K., and Lyu, S. K., "Research on Design Optimization of Worm Gear Swing Reducer through 3-Dimensional Modeling", Proc. Engineers. of KSPE, p. 271, 2016.
- Kang, J. H., Zang, Q., Ahn, I. H., and Lyu, S. K., "Multi-axial Vibration Testing Methodology of Vehicle Component", Journal of the Korean Society of Manufacturing Process Engineers, of KSMPE, No. 15, pp. 297-302, 2007.
- Lee, H. W. and Park, C. W., "Development of Reducer for Generating Facility of Electric Power for Low Noise/Vibration", J. Korean Soc. Precis. Eng., Vol. 25, No. 11, pp. 73-82, 2008.
- Stephen, P. R., "Handbook of Practical Gear Design and Manufacture" CRC Press, 2012.
피인용 문헌
- A Study on the Design of Rear Wheel Drive Reducer for Electric Vehicle vol.35, pp.6, 2018, https://doi.org/10.7736/kspe.2018.35.6.571
- A Study on the Optimal Design of Drive Gear for Transfer Gearbox vol.36, pp.2, 2019, https://doi.org/10.7736/kspe.2019.36.2.121
- Study on the Reduction of Gear Whine Noise in Diesel Engine Gear Train vol.36, pp.9, 2018, https://doi.org/10.7736/kspe.2019.36.9.867