Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Fabrication and Performance Evaluation of Worm Gear Reducer

웜기어 감속기 제작 및 성능평가에 관한 연구

  • Lee, Dong Gyu (School of Mechanical & Aerospace Engineering(ReCAPT), Gyeongsang National University) ;
  • Zhen, Qin (School of Mechanical & Aerospace Engineering(ReCAPT), Gyeongsang National University) ;
  • Jeon, Min Hyong (School of Mechanical & Aerospace Engineering(ReCAPT), Gyeongsang National University) ;
  • Kim, Lae Sung (Creative Aero-IT-Mech Convergence Eng. Program, Gyeongsang National University) ;
  • Lyu, Sung-Ki (School of Mechanical & Aerospace Engineering(ReCAPT), Gyeongsang National University)
  • 이동규 (경상대학교 기계항공공학부(항공연)) ;
  • 진진 (경상대학교 기계항공공학부(항공연)) ;
  • 전민형 (경상대학교 기계항공공학부(항공연)) ;
  • 김래성 (경상대학교 창의적항공IT기계융합사업단) ;
  • 류성기 (경상대학교 기계항공공학부(항공연))
  • Received : 2017.12.14
  • Accepted : 2018.01.16
  • Published : 2018.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

We aimed to develop a high quality 3.5 ton class swing reducer by studying the efficiency improvement of the reducer through the optimum design and performance evaluation of the assembled, high efficiency, lightweight 3.5 ton swing reducer. Based on the optimal design of the worm and worm wheel, the optimal manufacturing method of the worm wheel, the optimized casing design, and the optimum design of the output pinion, Respectively. Therefore, in this paper, to improve the efficiency of the worm gear reducer system, we will develop the manufacturing technology and verify the mass production by combining the manufacturing process design, processing and assembling technology according to the optimization design. We have conducted research to realize mass production by product verification such as product efficiency, reliability and durability according to optimal design of worm gear reducer.

Keywords

References

  1. Kim, T. H., Jang, J. H., Lee, D. G., Kim, L. S., Lyu, S. K., Study on Optimal Design and Analysis of Worm Gear Reducer for High Place Operation Car, Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 6, pp. 98-103, 2015. https://doi.org/10.14775/ksmpe.2015.14.6.098
  2. Jung, J. W., Kim, K. P., Ji, H. C., Moon, T. S., Design Improvement of the Driving Bevel Gear in Transmissions of a Tracked Vehicle, Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 2, pp. 1-6, 2015. https://doi.org/10.14775/ksmpe.2015.14.2.001
  3. Kang, J. H., Kim, J. S, Lyu, S. K., "A Study on the Relation Between Backlash and Tooth Contact for Optimization of the Conical Gear Marine Gearbox", Proc. of KSMPE, pp. 52-60, 2014.
  4. Yeh, T. J., "Modeling and Robust Control of Worm-gear driven Systems" , Simul. Model. Pract. Theory 17 (5) : 767-777, 2009. https://doi.org/10.1016/j.simpat.2009.01.002
  5. Simon, V. V., Influence of Tooth Errors and Shaft Misalignments on Loaded Tooth Contact in Cylindrical Worm Gears, Mech. Mach. Theory 41 (6) : 707- 724, 2006. https://doi.org/10.1016/j.mechmachtheory.2005.09.004
  6. Litvin, F. L., Reduction of Noise of Loaded and Unloaded Misaligned Gear Drives, Comput. Meth. Appl. Mech. Eng. 195 (41-43) : 5523-5536, 2006. https://doi.org/10.1016/j.cma.2005.05.055
  7. Lee, H. W. and Park, N. G., "A Study on Development of Railway Reducer for Low Noise/Vibration", J. Korean Soc. Precis. Eng., Vol. 21, No. 2, pp. 130-137, 2004.
  8. Mohan, L. V., Geometrical Aspects of Double Enveloping Worm Gear Drive, Mech. Mach. Theory 44 (11) : 2053-2065, 2009. https://doi.org/10.1016/j.mechmachtheory.2009.05.008
  9. Shi, W., Meshing Control of the Double-Enveloping Hourglass Worm Gearing under the Conditions of Existing the Errors and the Load, Mech. Mach. Theory 39 (1) : 61-74, 2004. https://doi.org/10.1016/S0094-114X(03)00104-6
  10. Lee, D. G., No, S. Y., Ahn, D. K., and Lyu, S. K., "Research on Design Optimization of Worm Gear Swing Reducer through 3-Dimensional Modeling", Proc. Engineers. of KSPE, p. 271, 2016.
  11. Kang, J. H., Zang, Q., Ahn, I. H., and Lyu, S. K., "Multi-axial Vibration Testing Methodology of Vehicle Component", Journal of the Korean Society of Manufacturing Process Engineers, of KSMPE, No. 15, pp. 297-302, 2007.
  12. Lee, H. W. and Park, C. W., "Development of Reducer for Generating Facility of Electric Power for Low Noise/Vibration", J. Korean Soc. Precis. Eng., Vol. 25, No. 11, pp. 73-82, 2008.
  13. Stephen, P. R., "Handbook of Practical Gear Design and Manufacture" CRC Press, 2012.

Cited by

  1. A Study on the Design of Rear Wheel Drive Reducer for Electric Vehicle vol.35, pp.6, 2018, https://doi.org/10.7736/kspe.2018.35.6.571
  2. A Study on the Optimal Design of Drive Gear for Transfer Gearbox vol.36, pp.2, 2019, https://doi.org/10.7736/kspe.2019.36.2.121
  3. Study on the Reduction of Gear Whine Noise in Diesel Engine Gear Train vol.36, pp.9, 2018, https://doi.org/10.7736/kspe.2019.36.9.867