DOI QR코드

DOI QR Code

An experimental and numerical approach in strength prediction of reclaimed rubber concrete

  • Williams, Kanmalai C. (Department of Civil Engineering, St. Peter's University) ;
  • Partheeban, P. (Department of Civil Engineering, St. Peter's College of Engineering and Technology)
  • 투고 : 2017.07.15
  • 심사 : 2018.02.03
  • 발행 : 2018.02.25

초록

Utilization of waste tires may be considered as one of the solution to the problems faced by the local authorities in disposing them. Reclaimed rubber (RR) is being used in concrete for replacing conventional aggregates. This research work is focused on the strength prediction of reclaimed rubber concrete using a Genetic Algorithm (GA) for M40 grade of concrete and comparing it with experimental results. 1000 sets were taken and 100 iterations were run during training of GA models. A base study has been carried out in this research work partially replacing cement with three types of fillers such as Plaster of Paris (POP), Fly Ash (FA) and Silica Fume (SF). A total of 243 cubes were cast and tested for compression using a Universal Testing Machine. It was found that SF produced maximum strength in concrete and was used in the main study with reclaimed rubber. Tests were conducted on 81 cube samples with a combination of optimum SF percent and various proportions of RR replacing coarse aggregates in concrete mix. Compressive strength tests of concrete at 7, 14 and 28 days reveal that the maximum strength is obtained at 12 percent replacement of cement and 9 percent replacement of coarse aggregates respectively. Moreover the GA results were found to be in line with the experimental results obtained.

키워드

참고문헌

  1. Aginam, C.H., Chidolue, C.A. and Kwakire, C. (2013), "Investigating the effects of coarse aggregate types on the compressive strength of concrete", Int. J. Eng. Res. Appl., 3(4), 1140-1144.
  2. Amudhavalli, N.K. and Mathew, J. (2012), "Effect of silica fume on strength and durability parameters in concrete", Int. J. Eng. Sci. Emerg. Technol., 3(1), 28-35.
  3. Bansal, R., Singh, V. and Pareek, R.K. (2015), "Effect on compressive strength with partial replacement of fly ash", Int. J. Emerg. Technol., 6(1), 1-6. https://doi.org/10.14716/ijtech.v6i1.777
  4. Debabrata, P. and Dutta, D. (2014), "Properties exploration of conventional concrete after silica supplementation", Int. J. Innov. Res. Sci. Eng. Technol., 3(1), 8431-8435.
  5. Ghorpade Vaishali, G., Rao Sudharsana, H. and Beulah, M. (2012), "Development of genetic algorithm based neural network model for predicting workability of high performance concrete" Int. J. Res. Rev. Appl. Math. Comput. Sci., 2(5), 40-50.
  6. Ghutke Vishal, S. and Bhandari Pranita, S. (2014), "Influence of silica fume on concrete", IOSR J. Mech. Civil Eng., 44-47.
  7. Kanthe, V.N. (2013), "Use of waste Plaster of Paris in concrete", Int. J. Innov. Res. Develop., 2(3), 855-862.
  8. Mansour and Saravanan (2015), "Experimental study on concrete by oartial replacement of fine aggregate with rubber", Int. J., 1, 60-64.
  9. Namagga, C. and Atadero, R.A. (2009) "Optimization of fly ash in concrete: High lime fly ash as a replacement for cement and filler material", World of Coal Ash Conference, Lexington, May.
  10. Namyong, J., Sangchun, Y. and Hongbum, C. (2004), "Prediction of compressive strength of In-situ concrete based on mixture proportions", J. Asian Arch. Build. Eng., 3(1), 9-16. https://doi.org/10.3130/jaabe.3.9
  11. Prasad, R., Anuradha, V. and Rahul, N.V. (2016), "Partial replacement of natural aggregates with reclaimed rubber in cement concrete", SSRG Int. J. Civil Eng., 3(4), 6-11.
  12. Pratik, P. and Indrajit, P. (2013), "Effect of partial replacement of cement with silica fume and cellulose fiber on workability and compressive strength of high performance concrete", Ind. J. Appl. Res., 3 (7), 263-264. https://doi.org/10.15373/2249555X/JULY2013/82
  13. Sharma, A., Gupta, A., Varma, V. and Singh, B. (2014), "Variation of different percentage of silica fume on concrete mechanical properties", Int. J. Recent Res. Aspect., 1(1), 50-53
  14. Siddique, R. and Iqbal Khan, M. (2011), Silica Fume, Supplementary Cementitious Materials, Springer, Berlin
  15. Swapnil, S., Piyush, S. and Mohod, M.V. (2016), "Use of fly ash as partial replacement of cement in concrete pavements", Int. J. Civil Eng., 60-65.
  16. Yadav, R.N. (2008), "A study on Plaster of Paris as an additive on some properties of magnesium oxychloride flooring composition", Int. J. Chem. Sci., 6 (3), 1646-1652.
  17. Youssf, O., Gawady El, M.A., Mills, J.E. and Ma, X. (2014), "Prediction of crumb rubber concrete strength", Australasian Conference on the Mechanics of Structures and Materials, New South Wales, December.

피인용 문헌

  1. Mechanical behavior of crumb rubber concrete under axial compression vol.9, pp.3, 2020, https://doi.org/10.12989/acc.2020.9.3.249
  2. Effect of crumb rubber on compressive behaviour of CRCFST stub columns vol.25, pp.3, 2018, https://doi.org/10.12989/cac.2020.25.3.267
  3. Characterization of a carbon black rubber Poisson's ratio based on optimization technique applied in FEA data fit vol.76, pp.5, 2018, https://doi.org/10.12989/sem.2020.76.5.653
  4. Axial Performance of Steel Fiber-Reinforced Rubberized Concrete-Filled Circular Tubular Columns vol.2021, pp.None, 2021, https://doi.org/10.1155/2021/6678802
  5. Microstructural and mechanical characteristics of self-compacting concrete with waste rubber vol.78, pp.2, 2021, https://doi.org/10.12989/sem.2021.78.2.175
  6. Experimental Evaluation of Untreated and Pretreated Crumb Rubber Used in Concrete vol.11, pp.5, 2021, https://doi.org/10.3390/cryst11050558
  7. Bond behavior of FRP bars in CR concrete vol.28, pp.2, 2021, https://doi.org/10.12989/cac.2021.28.2.107
  8. Effect of Waste Tire Rubber Particles on Concrete Abrasion Resistance Under High-Speed Water Flow vol.15, pp.1, 2021, https://doi.org/10.1186/s40069-021-00475-8