DOI QR코드

DOI QR Code

Combined effect of mineral admixture and curing temperature on mechanical behavior and porosity of SCC

  • 투고 : 2017.10.26
  • 심사 : 2018.01.30
  • 발행 : 2018.02.25

초록

In order to provide sufficient stability and resistance against bleeding and segregation during transportation and placing, mineral admixtures are often used in self-compacting concrete mixes (SCC). These fine materials also contribute to reducing the construction cost and the consumption of natural resources. Many studies have confirmed the benefits of these mineral admixtures on properties of SCC in standard curing conditions. However, there are few published reports regarding their effects at elevated curing temperatures. The main objective of this study is to investigate the effect of three different mineral admixtures namely limestone powder (LP), granulated blast furnace slag (GS) and natural pozzolana (PZ) on mechanical properties and porosity of SCC when exposed to different curing temperatures (20, 40, 60 and $80^{\circ}C$). The level of substitution of cement by mineral admixture was fixed at 15%. The results showed that increasing curing temperature causes an improvement in performance at an early age without penalizing its long-term properties. However the temperature of $40^{\circ}C$ is considered the optimal curing temperature to make economical and high performance SCC. On the other hand, GS is the most suitable mineral admixture for SCC under elevated curing temperature.

키워드

참고문헌

  1. AFGC, (2002), Interim Recommendations for Use of Self-consolidating Concrete, French Association of Civil Engineering, France.
  2. Aparicio, S., Martinez-Ramirez, S., Ranz, J., Fuente, J.V. and Hernandez, M.G. (2016), "Microstructural and mechanical properties study of the curing process of self-compacting concrete", Mater. Des., 94, 479-486. https://doi.org/10.1016/j.matdes.2016.01.067
  3. Ba, M., Qian, Ch., Guo, X. and Han, X. (2011), "Effects of steam curing on strength and porous structure of concrete with low water/binder ratio", Constr. Build. Mater., 25, 123-128. https://doi.org/10.1016/j.conbuildmat.2010.06.049
  4. Belaidi, A.S.E., Azzouz, L., Kadri, E.H. and Kenai, S. (2012), "Effect of natural pozzolana and marble powder on the properties of self-compacting concrete", Constr. Build. Mater., 31, 251-257. https://doi.org/10.1016/j.conbuildmat.2011.12.109
  5. Bingol, A.F. and Tohumcu, I. (2013), "Effects of different curing regimes on the compressive strength properties of self-compacting concrete incorporating fly ash and silica fume", Mater. Des., 51, 12-18. https://doi.org/10.1016/j.matdes.2013.03.106
  6. Boubekeur, T., Ezziane, K. and Kadri, E.H. (2017), "Quantification and analysis of heat hydration of blended cement at different temperature", J. Adhes. Sci. Technol., 1568-5616
  7. Boucetta, T.A. (2014), "Contribution of granulated slag and glass powder to the flow and durability properties of self-compacting concrete and high-performance concrete", Ph.D. Thesis, University of Annaba, Algeria.
  8. Bougara, A., Lynsdale, C. and Ezziane, K. (2009), "Activation of Algerian slag in mortars", Constr. Build. Mater., 23, 542-547. https://doi.org/10.1016/j.conbuildmat.2007.10.012
  9. Boukendakdji, O. (2010), "Study of the influence of the formulation parameters on properties of selfcompacting concrete: optimization of operating conditions", Ph.D. Thesis, University of Blida1, Algeria.
  10. Boukendakdji, O., Kadri, E.H. and Kenai, S. (2012), "Effects of granulated blast furnace slag and superplasticizer type on the fresh properties and compressive strength of self-compacting concrete", Cement Concrete Compos., 34, 583-590. https://doi.org/10.1016/j.cemconcomp.2011.08.013
  11. Chopin, D., De-Larrard, F. and Cazacliu, B. (2004), "Why do HPC and SCC require a longer mixing time?", Cement Concrete Res., 34, 2237-2243. https://doi.org/10.1016/j.cemconres.2004.02.012
  12. Chore, H.S. and Joshia, M.P. (2015), "Strength evaluation of concrete with fly ash and GGBFS as cement replacing materials", Adv. Concrete Constr., 3(3), 223-236. https://doi.org/10.12989/acc.2015.3.3.223
  13. Deepankar, K.A., Bhupinder, S. and Surender, K.V. (2016), "The effect of attack of chloride and sulphate on ground granulated blast furnace slag concrete", Adv. Concrete Constr., 4(2), 107-121. https://doi.org/10.12989/acc.2016.4.2.107
  14. Derabla, R. and Larbi Benmalek, M. (2014), "Characterization of heat-treated self-compacting concrete containing mineral admixtures at early age and in the long term", Constr. Build. Mater., 66, 787-794. https://doi.org/10.1016/j.conbuildmat.2014.06.029
  15. Diamantonis, N., Marinos, I., Katsiotis, M.S., Sakellariou, A., Papathanasiou, A., Kaloidas, V. and Katsioti, M. (2010), "Investigations about the influence of fine additives on the viscosity of cement paste for selfcompacting concrete", Constr. Build. Mater., 24, 1518-1522. https://doi.org/10.1016/j.conbuildmat.2010.02.005
  16. Escalante-Garcia, J.I. and Sharp, J.H. (2001), "The microstructure and mechanical properties of blended cements hydrated at various temperatures", Cement Concrete Res., 31, 695-702. https://doi.org/10.1016/S0008-8846(01)00471-9
  17. Ghrici, M., Kenai, S. and Said-Mansour, M. (2007), "Mechanical properties and durability of mortar and concrete containing natural pozzolana and limestone blended cements", Cement Concrete Compos., 29, 542-549. https://doi.org/10.1016/j.cemconcomp.2007.04.009
  18. Gidion, T. and Marios, N.S. (2015), "Supplementary cementitious materials: Strength development of selfcompacting concrete under different curing temperature", The 5th International Conference of Euro Asia Civil Engineering Forum (EACEF-5), Procedia Engineering, 125, 699 - 704.
  19. Hadj-sadok, A., Kenai, S., Courard, L. and Darimont, A. (2011), "Microstructure and durability of mortars modified with medium active blast furnace slag", Constr. Build. Mater., 25, 1018-1025. https://doi.org/10.1016/j.conbuildmat.2010.06.077
  20. Hallal, A., Kadri, E.H., Ezziane, K., Kadri, A. and Khelafi, H. (2010), "Combined effect of mineral admixtures with superplasticizers on the fluidity of the blended cement paste", Constr. Build. Mater., 24, 1418-1423. https://doi.org/10.1016/j.conbuildmat.2010.01.015
  21. Hammat, S. (2012), "Influence of slag and pozzolana on the shrinkage of self-compacting mortars", Master Thesis, University, of Blida1, Blida, Algeria.
  22. Ho, D.W.S., Chua, C.W. and Tam, C.T. (2003), "Steam-cured concrete incorporating mineral admixtures", Cement Concrete Res., 33, 595-601. https://doi.org/10.1016/S0008-8846(02)01028-1
  23. Itim, A., Ezziane, K. and Kadri, E.H. (2011), "Compressive strength and shrinkage of mortar containing various amounts of mineral additions", Constr. Build. Mater., 25, 3603-3609. https://doi.org/10.1016/j.conbuildmat.2011.03.055
  24. Juenger, M.C.G. and Siddique, R. (2015), "Recent advances in understanding the role of supplementary cementitious materials in concrete", Cement Concrete Res., 78, 71-80. https://doi.org/10.1016/j.cemconres.2015.03.018
  25. Kangkang, T., Steve, M. and Greg, B. (2015), "Technical and economical feasibility of using GGBS in long span concrete structures", Adv. Concrete Constr., 3(1), 1-14. https://doi.org/10.12989/acc.2015.3.1.001
  26. Kanstad, T., Hammer, T.A., Bjontegaard, O. and Sellevold, E.J. (2003), "Mechanical properties of young concrete: Part I: Experimental results related to test methods and temperature effects", Mater. Struct., 36, 218-225.
  27. Kenai, S., Debbih, A., Menadi, B. and Kadri, E.H. (2014), "Effect of coarse and fine recycled aggregates and natural pozzolana on fresh properties of self-compacting concrete", Proceedings of the 2014 World Congress on Advances in Civil, Environmental, and Material Research (ACEM14), Busan, Korea, Augus.
  28. Kim, J.K., Moon, Y.H. and Eo, S.H. (2000), "Compressive strength development of concrete with different curing time and temperature", Cement Concrete Res., 28, 1761-1773.
  29. Lenkaa, S. and Panda, K.C. (2017), "Effect of metakaolin on the properties of conventional and selfcompacting concrete", Adv. Concrete Constr., 5(1), 31-48. https://doi.org/10.12989/acc.2017.5.1.31
  30. Liu, B., Xie, Y. and Li, J. (2005), "Influence of steam curing on the compressive strength of concrete containing supplementary cementing materials", Cement Concrete Res., 35, 994-1002. https://doi.org/10.1016/j.cemconres.2004.05.044
  31. Lothenbach, B., Winnefeld, F., Alder, C., Wieland, E. and Lunk, P. (2007), "Effect of temperature on the pore solution, microstructure and hydration products of Portland cement pastes", Cement Concrete Res., 37, 483-491. https://doi.org/10.1016/j.cemconres.2006.11.016
  32. Mallikarjuna, R.G. and Gunneswara, R.T.D. (2017), "Effect of fly ash and GGBS combination on mechanical and durability properties of GPC", Adv. Concrete Constr., 5(4), 313-330. https://doi.org/10.12989/ACC.2017.5.4.313
  33. Menadi, B., Kenai, S., Khatib, J. and Ait-Mokhtar, A. (2009), "Strength and durability of concrete incorporating crushed limestone sand", Constr. Build. Mater., 23, 625-633. https://doi.org/10.1016/j.conbuildmat.2008.02.005
  34. Neville, A-M. (2000), Properties of Concrete, Eyrolles Editions, Paris, France.
  35. Okamura, H. and Ouchi, M. (2003), "Self-compacting concrete", J. Adv. Concrete Technol., 1, 5-15. https://doi.org/10.3151/jact.1.5
  36. Ozer, B. and Ozkul, M.H. (2004), "The influence of initial water curing on the strength development of ordinary portland and pozzolanic cement concretes", Cement Concrete Res., 1, 1-6.
  37. Parra, C., Valcuende, M. and Gomez, F. (2011), "Splitting tensile strength and modulus of elasticity of selfcompacting concrete", Constr. Build. Mater., 25, 201-207. https://doi.org/10.1016/j.conbuildmat.2010.06.037
  38. Persson, B. (2001), "Comparison between mechanical properties of self-compacting concrete and the corresponding properties of normal concrete", Cement Concrete Res., 31, 193-198. https://doi.org/10.1016/S0008-8846(00)00497-X
  39. Pihlajavaara, S. (1972), "Effect of temperature on strength of concrete", Am. Concrete Inst. Spec. Publ., 34, 347-434.
  40. Rakesh, K.P. and Bibhuti, B.M. (2016), "Fresh and hardened properties of concrete incorporating ground granulated blast furnace slag-A review", Adv. Concrete Constr., 4(4), 283-303. https://doi.org/10.12989/acc.2016.4.4.283
  41. Ramezanianpour, A.A., Khazali, M.H. and Vosoughi, P. (2013), "Effect of steam curing cycles on strength and durability of SCC: A case study in precast concrete", Constr. Build. Mater., 49, 807-813. https://doi.org/10.1016/j.conbuildmat.2013.08.040
  42. Ramezanianpour, A.M., Esmaeili, K., Ghahari, S.A. and Ramezanianpour, A.A. (2014), "Influence of initial steam curing and different types of mineral additives on mechanical and durability properties of selfcompacting concrete", Constr. Build. Mater., 73, 187-194. https://doi.org/10.1016/j.conbuildmat.2014.09.072
  43. Reinhardt, H.W. and Stegmaier, M. (2006), "Influence of heat curing on the pore structure and compressive strength of self-compacting concrete (SCC)", Cement Concrete Res., 36, 879-885. https://doi.org/10.1016/j.cemconres.2005.12.004
  44. Salhi, M., Ghrici M., Li, A. and Bilir, T. (2017), "Effect of curing treatments on the material properties of hardened self-compacting concrete", Adv. Concrete Constr., 5(4), 359-375. https://doi.org/10.12989/ACC.2017.5.4.359
  45. Siad, H., Kamali-Bernard, S., Mesbah, H.A., Escadeillas, G., Mouli, M. and Khelafi, H. (2013), "Characterization of the degradation of self-compacting concretes in sodium sulfate environment: Influence of different mineral admixtures", Constr. Build. Mater., 47, 1188-1200. https://doi.org/10.1016/j.conbuildmat.2013.05.086
  46. Yahiaoui, W., Kenai, S., Menadi B., Kadri, E.H. (2017), "Durability of self-compacted concrete containing slag in hot climate", Adv. Concrete Constr., 5(3), 271-288. https://doi.org/10.12989/acc.2017.5.3.271
  47. Yazici, H., Yardimci, M.Y., Aydin, S. and Karabulut, A.S. (2009), "Mechanical properties of reactive powder concrete containing mineral admixtures under different curing regimes", Constr. Build. Mater., 23, 1223-1231. https://doi.org/10.1016/j.conbuildmat.2008.08.003
  48. Ye, G., Liu, X., De-Schutter, G., Poppe, A.M. and Taerwe, L. (2007), "Influence of limestone powder used as filler in SCC on hydration and microstructure of cement pastes", Cement Concrete Compos., 29, 94-102. https://doi.org/10.1016/j.cemconcomp.2006.09.003
  49. Zhao, H., Sun, W., Wu, X. and Gao, B. (2012), "Effect of initial water-curing period and curing condition on the properties of self-compacting concrete", Mater. Des., 35, 194-200. https://doi.org/10.1016/j.matdes.2011.09.053
  50. Zulfu, C.U., Kazim, T. and Mehmet, K. (2008), "Effect of mineral admixtures on the correlation between ultrasonic velocity and compressive strength for self-compacting concrete", Russ. J. Nondestructive Test, 44, 367-374. https://doi.org/10.1134/S1061830908050100

피인용 문헌

  1. Elaboration of bio-based building materials made from recycled olive core vol.8, pp.2, 2018, https://doi.org/10.1557/s43581-021-00006-8