DOI QR코드

DOI QR Code

Structural evaluation of a foldable cable-strut structure for kinematic roofs

  • Cai, Jianguo (Key Laboratory of C & PC Structures of Ministry of Education, National Prestress Engineering Research Center, Southeast University) ;
  • Zhang, Qian (Key Laboratory of C & PC Structures of Ministry of Education, National Prestress Engineering Research Center, Southeast University) ;
  • Zhang, Yiqun (Key Laboratory of Electronic Equipment Structure Design, Ministry of Education) ;
  • Lee, Daniel Sang-hoon (Institute of Architecture and Technology, The Royal Danish Academy of Fine Arts, School of Architecture, Design and Conservation) ;
  • Feng, Jian (Key Laboratory of C & PC Structures of Ministry of Education, National Prestress Engineering Research Center, Southeast University)
  • 투고 : 2018.05.28
  • 심사 : 2018.11.28
  • 발행 : 2018.12.10

초록

The rapidly decreasing natural resources and the global variation of the climate push us to find intelligent and efficient structural systems to provide more people with fewer resources. This paper proposed a kinematic cable-strut system to realize sustainable structures in responding to changing environmental conditions. At first, the concept of the kinematic system based on crystal-cell pyramid (CP) cable-strut unit was given. Then the deployment of the structure was studied experimentally. After that, the static behaviors in the fully deployed state under the symmetric and asymmetric load cases were investigated. Moreover, the effects of thermal loading and the initial prestress distribution were also discussed. Comparative studies between the proposed structure and other deployable cable-strut system under three times of design load cases were carried out. Finally, the robustness of the system was studied by removal of one passive cable at one time.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Akgun, Y., Gantes, C.J., Kalochairetis, K.E. and Kiper, G. (2010), "A novel concept of convertible roofs with high transformability consisting of planar scissor-hinge structures", Eng. Struct., 32, 2873-2883. https://doi.org/10.1016/j.engstruct.2010.05.006
  2. Akgun, Y., Gantes, C., Sobek, W., Korkmaz, K. and Kalochairetis, K. (2011), "A Novel Adaptive Spatial Scissor-hinge Structural Mechanism for Convertible Roofs", Eng. Struct., 33(4), 1365-1376. https://doi.org/10.1016/j.engstruct.2011.01.014
  3. Bai, J.B., Shenoi, R.A. and Xiong, J.J. (2017), "Thermal analysis of thin-walled deployable composite boom in simulated space environment", Compos. Struct., 173, 210-218. https://doi.org/10.1016/j.compstruct.2017.04.022
  4. Block, P. (2003), Scissor hinge deployable membrane structures tensioned by pleated pneumatic artificial muscles, Master Thesis; Vrije Universiteit Brussel, Belgium.
  5. Cai, J.G., Zhou, Y., Feng, J. and Xu, Y.X. (2012), "Mechanical behavior of a shelter system based on cable-strut structures", J. Zhejiang Univ.-Science A, 13(12), 895-903. https://doi.org/10.1631/jzus.A1200172
  6. Cai, J.G., Deng, X.W., Feng, J. and Xu, Y.X. (2014), "Mobility Analysis of Generalized Angulated Scissor-like Elements with the Reciprocal Screw Theory", Mech. Mach. Theory, 82, 256-265. https://doi.org/10.1016/j.mechmachtheory.2014.07.011
  7. Cai, J.G., Deng, X.W., Xu, Y.X. and Feng, J. (2015a), "Geometry and Motion Analysis of Origami-based Deployable Shelter Structures", J. Struct. Eng. ASCE, 141(10), 06015001. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001238
  8. Cai, J.G., Deng, X.W. and Feng, J. (2015b), "Mobility Analysis of Planar Radially Foldable Bar Structures", Proceedings of the Institution of Mechanical Engineers Part G: Journal of Aerospace Engineering, 229(4), 694-702. https://doi.org/10.1177/0954410014539292
  9. Cai, J.G., Ma, R.J., Deng, X.W. and Feng, J. (2016), "Static behavior of deployable cable-strut structures", J. Constr. Steel Res., 119, 63-75. https://doi.org/10.1016/j.jcsr.2015.12.003
  10. Cai, J.G., Wang, X.Y., Yang, R.G. and Feng, J. (2018), "Mechanical behavior of tensegrity structures with High-mode imperfections", Mech. Res. Commun., 94, 58-63. https://doi.org/10.1016/j.mechrescom.2018.09.006
  11. Cai, J.G., Yang, R.G., Wang, X.Y. and Feng, J. (2019), "Effect of initial imperfections of struts on the mechanical behavior of tensegrity structures", Compos. Struct., 207, 871-876. https://doi.org/10.1016/j.compstruct.2018.09.018
  12. Chen, Y., Peng, R. and You, Z. (2015), "Origami of thick panels", Science, 349(6246), 396-400. https://doi.org/10.1126/science.aab2870
  13. Chen, L., Hu, D., Deng, H., Cui, Y. and Zhou, Y. (2016), "Optimization of the construction scheme of the cablestrut tensile structure based on error sensitivity analysis", Steel Compos. Struct., Int. J., 21(5), 1031-1043. https://doi.org/10.12989/scs.2016.21.5.1031
  14. Cheng, B., Wu, J. and Wang, J. (2015), "Strengthening of perforated walls in cable-stayed bridge pylons with double cable planes", Steel Compos. Struct., Int. J., 18(4), 811-831. https://doi.org/10.12989/scs.2015.18.4.811
  15. Choi, E.M., Lee, J.N. and Park, C.S. (2008), "Characteristics and a Variation of Profile Shape in Scissors Deployable Structure", J. Korean Assoc. Shell Spatial Struct., 8(4), 57-64.
  16. De Temmerman, N. (2007), Design and Analysis of Deployable Bar Structures for Mobile Architectural Applications, Ph.D. Thesis; Vrije Universiteit Brussel, Belgium.
  17. Escrig, F., Valcarcel, J.P. and Sanchez, J. (1996), "Deployable cover on a swimming pool in Seville", J. IASS, 37(120), 39-70.
  18. Filipov, E.T., Tachi, T. and Paulino, G.H. (2015), "Origami tubes assembled into stiff, yet reconfigurable structures and metamaterials", Proceedings of the National Academy of Sciences of the United States of America, 112(40), 12321-12326. https://doi.org/10.1073/pnas.1509465112
  19. Friedman, N., Farkas, G. and Ibrahimbegovic, A. (2011), "Deployable/Retractable Structures Towards Sustainable Development", Pollack Periodica, 6(2), 85-97. https://doi.org/10.1556/Pollack.6.2011.2.8
  20. Fu, F. (2006), "Non-linear static analysis and design of Tensegrity domes", Steel Compos. Struct., Int. J., 6(5), 417-433. https://doi.org/10.12989/scs.2006.6.5.417
  21. Gantes, C. (1996), Deployable Structures: Application and Design, WIT Press, USA.
  22. Kovacs, F., Tarnai, T., Guest, S.D. and Fowler, P.W. (2004), "Double-link expandohedra: a mechanical model for expansion of a virus", Proc. Roy. Soc. A, 460, 3191-3202. https://doi.org/10.1098/rspa.2004.1344
  23. Kokawa, T. (1996), "Scissors Arch with Zigzag-Cable through Pulley-Joint", Proceedings of Conceptual Design of Structure, Stuttgart, Volume II, 868-875.
  24. Kokawa, T. (1997), "Cable Scissors Arch-Marionettic Structure", Structural Morphology, Towards the New Millennium, Proceedings of International Conference of IASS, University of Nottingham, England, pp. 107-116.
  25. Li, P. and Wu, M. (2017), "Stabilities of cable-stiffened cylindrical single-layer latticed shells", Steel Compos. Struct., Int. J., 24(5), 591-602.
  26. Li, Y., Vu, K.K. and Liew, J.Y.R. (2011), "Deployable Cable-Chain Structures: Morphology, Structural Response and Robustness Study", J. Int. Assoc. Shell Spatial Struct., 52(168), 83-96.
  27. Liew, J.Y.R., Vu, K.K. and Anandasivam, K. (2008), "Recent development of deployable tension-strut structures", Adv. Struct. Eng., 11(6), 599-614. https://doi.org/10.1260/136943308787543630
  28. Liu, Z.Q., Qiu, H. and Li, X. (2017), "Review of large spacecraft deployable membrane antenna structures", Chinese J. Mech. Eng., 30, 1447-1459. https://doi.org/10.1007/s10033-017-0198-x
  29. Pellegrino, S. (2001), Deployable Structures, Springer-Verlag Wien, New York.
  30. Raheem, S.E.A. (2014), "Dynamic characteristics of hybrid tower of cable-stayed bridges", Steel Compos. Struct., Int. J., 17(6), 803-824. https://doi.org/10.12989/scs.2014.17.6.803
  31. Sareh, P. and Guest, S.D. (2015), "Design of isomorphic symmetric descendants of the Miura-ori", Smart Mater. Struct., 24, 085001. https://doi.org/10.1088/0964-1726/24/8/085001
  32. Samili, A. and Motro, R. (2005), "Folding/unfolding of tensegrity systems by removal of self-stress", Proceeding of IASS 2005.
  33. Vu, K.K., Liew, J.Y.R. and Anandasivam, K. (2006a), "Deployable tension-strut structures: from concept to implementation", J. Constr. Steel Res., 62, 195-209. https://doi.org/10.1016/j.jcsr.2005.07.007
  34. Vu, K.K., Liew, J.Y.R. and Anandasivam, K. (2006b), "Deployable tension-strut structures: structural morphology study and alternative form creations", Int. J. Space Struct., 21(3), 149-164. https://doi.org/10.1260/026635106779380494
  35. Wang, B.B. (1998), "Cable-strut systems: part II-Cable-strut", J. Constr. Steel Res., 45(3), 291-299. https://doi.org/10.1016/S0143-974X(97)00076-X
  36. Wang, B.B. and Li, Y.Y. (2003), "Novel cable-strut grids made of prisms: part I. Basic theory and design", J. Int. Assoc. Shell Spat. Struct., 44, 93-108.
  37. Yan, R., Chen, Z., Wang, X., Liu, H. and Xiao, X. (2015), "A new equivalent friction element for analysis of cable supported structures", Steel Compos. Struct., Int. J., 18(4), 947-970. https://doi.org/10.12989/scs.2015.18.4.947
  38. Zhou, W., Chen, Y., Peng, B., Yang, H., Yu, H.J., Liu, H. and He, X.P. (2014), "Air damping analysis in comb microaccelerometer", Adv. Mech. Eng., Article ID 373172, 6 pages.