한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제17권5호
  • /
  • Pages.70-75
  • /
  • 2018
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

미세입자 분사가공 시 표면 조건 변화에 따른 가공 표면 형상 분석

Analysis of Machined Surface Morphology According to Changes of Surface Condition in Micro Particle Blasting

  • 투고 : 2018.07.11
  • 심사 : 2018.08.04
  • 발행 : 2018.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study analyzes the change of Al 6061-T6 specimen surface shape when undergoing microparticle spraying and analyzes the influence of factors on the experiment. Fine particle spraying is applied to the specimen and the surface shape of the processed surface is measured through a surface shape measuring device. The measured data was analyzed by the ANOVA method to investigate the effect of factors such as particle, nozzle diameter, pressure, injection height, and injection time on the injection depth and injection diameter.

키워드

참고문헌

  1. Kwon, D. G., Wang, D. H., "Optimal Blasting Conditions for Surface Profile when Micro Particle Blasting by Statistical Analysis of Orthogonal Arrays," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 4, pp. 148-154, 2016. https://doi.org/10.14775/ksmpe.2016.15.4.148
  2. Jang, H. S., Kim, H. S., Shin, K. H., "A Study on Performance Improvement of Electrical Discharge Machining for Producing Micro-holes Using a Shot Blasting Surface Treatment," Transactions of Materials Processing, Vol. 21 No. 5, pp. 312-318, 2012. https://doi.org/10.5228/KSTP.2012.21.5.312
  3. Kim, S. H., Wang, D. H., Lee, S. H., “The Characteristics of Surface Roughness when Micro Blasting of Titanium Alloy with Spiral Movement,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No, 4, pp. 125-130, 2012.
  4. Yun,, J. D., Wang, D. H., Ahn,, Y. C., Go, C. H., "Electrical Discharge Machining of Alumina Ceramic Matrix Composites Containing Electro-conductive Titanium Carbide as a Second Phase," JOURNAL-KOREAN CERAMIC SOCIETY, Vol. 34, No.10, pp. 1092-1098, 1997.
  5. Choi, S. Y., Kwon, D. G., Park, I. S., Wang, D. H., "A study on the optimal conditions for machining accuracy when endmill fillet cutting at the corner", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15 No. 4, pp. 101-108, 2016. https://doi.org/10.14775/ksmpe.2016.15.4.101

피인용 문헌

  1. Magnetic Abrasive Finishing of Beta-Titanium Wire Using Multiple Transfer Movement Method vol.10, pp.19, 2020, https://doi.org/10.3390/app10196729