한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제17권5호
  • /
  • Pages.16-22
  • /
  • 2018
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

극지운항 선박용 루버 환기창 유동해석에 관한 연구

A Study on the Flow Analysis of Ventilation Louver for Polar Ship

  • 투고 : 2018.06.25
  • 심사 : 2018.07.11
  • 발행 : 2018.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study is about flow distribution in ventilation systems used in marine louvers. The flow analysis on a louver installed on the vent of a vessel results in the following conclusions: (a) as the velocity of the fluid entering the louver increases, the pressure drop increases; (b) as the pressure drop increases, it tends to increase following a quadratic function. The velocity was confirmed to decrease at the entrance of the louver. This indicates that as the pressure increases, the velocity decreases, and the velocity of the moving fluid is increasing as it passes through the louver vanes.

키워드

참고문헌

  1. Seo, J. H., Kim, B. T., Chin, D. H., Yoon, M. C. Kwak. J. S., "Comparison of the Contact Characteristics for Sealing strips of the Tsunami Damper", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 1, pp. 21-28, 2015. https://doi.org/10.14775/ksmpe.2015.14.1.021
  2. Jang, S. C., Jung, W. B., Yi, C. S., "A Study on Performance Improvement of Gear Type Vane Damper in Marine/Offshore FD Fan", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 2, pp. 7-13, 2015. https://doi.org/10.14775/ksmpe.2015.14.2.007
  3. Yi, C. S., Chin. D. H., "Numerical Analysis on the Development of a Ventilation Opening Louver for Marine", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 1, pp. 30-35, 2017. https://doi.org/10.14775/ksmpe.2016.16.1.030
  4. Lim, K. B., Lee, K. S. and Lee, C. H., "A Numerical Study on the Characteristics of Flow Field, Temperature and Concentration Distribution According to Changing the Shape of Separation Plate of Kitchen Hood System" Journal of KSME B, Vol. 30, No. 2, pp. 177-185, 2006. https://doi.org/10.3795/KSME-B.2006.30.2.177
  5. Yi, C. S., Jang, S. C., Choi, J. H., "Numerical Analysis on Hood Shape Improvement of Local Ventilation System", Journal of ACRE, Vol. 21, No. 4, pp. 260-265, 2009.
  6. Park, J. Y., Yi, C. S., Chin, D. H., "Numerical Analysis on the Development of Shut off Damperfor Tsunami at Nuclear Plant", Jorunal of KSMTE, Vol. 23 No. 5, pp. 471-477, 2014.
  7. Yi, C. S., "Numerical Analysis of the Kitchen Hood Ventilation System for Marine Environment", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 5, pp. 96-101, 2015. https://doi.org/10.14775/ksmpe.2015.14.5.096