DOI QR코드

DOI QR Code

L자형 배관내 물의 결빙에 관한 해석적 연구

Numerical Analysis on the Freezing Process of Internal Water Flow in a L-Shape Pipe

  • 이충호 (경상대학교 기계공학부, ReCAPT) ;
  • 서정세 (경상대학교 기계공학부, ReCAPT)
  • Lee, Chung Ho (School of Mechanical Engineering, Gyeongsang National UNIV.) ;
  • Suh, Jeong-Se (School of Mechanical Engineering, Gyeongsang National UNIV.)
  • 투고 : 2018.11.04
  • 심사 : 2018.11.15
  • 발행 : 2018.12.31

초록

In this study, the freezing process of L-shaped pipe exposed to the outside was investigated numerically by considering the mushy zone of freezing water. From the numerical results, it was found that the flow was outwardly directed due to the influence of the L-shaped bending part in the outside exposed part of the pipe, and the ice was formed in the shape of longitudinal corrugation on the wall surface of the pipe after the bending part. It is confirmed that this phenomenon is caused by the venturi effect due to the freezing as seen in connection with the velocity distribution in the pipe. It is found that the remelting phenomenon at the end of the freezing section occur simultaneously during the process of forming the ice in the pipe section. In regard of the factors affecting freezing, it was found that the thickness of the freezing layer is increased as the exposed pipe surface temperature is decreased, and the pipe surface temperature had a significant effect on the change of the freezing layer thickness. At the same time, it was found that the freezing layer becomes relatively thin when the water inflow rate is increased. This phenomenon was caused by reducing the exposure time of freezing water due to the vigorous flow convection of the water fluid.

키워드

참고문헌

  1. Bak, Y.-D., Cho, H.-C., Choi, B.-I., Kim, K.-S., “An Experimental Study for the Liquid Freezing Phenomena in a Pipe During Ice Plugging,” The Korean Society of Mechanical Engineers, Vol. 25, No. 3, pp. 366-372, 2001.
  2. Suh, J.-S., Ro, S. T., “Analysis of Ice - Formation Phenomena for Fully Developed Laminar Water Flow in Concentric Circular - Tube Annuli,” Transactions of the Korean Society of Mechanical Engineers B, Vol. 21, No. 11, pp. 1552-1561, 1997. https://doi.org/10.22634/KSME-B.1997.21.11.1552
  3. Suh, J.-S., Kim, M. G., Ro, S. T., Lim, C. S., "Ice - Formation Phenomena for Laminar Water Flow in a Stenotic Tube," Korean J. Air-Conditioning and Refrigeration Engineering, Vol. 10, No.1, pp. 11-21, 1998.
  4. Cho, D. H., Lee, J. S., “A Study on the Condensation Heat Transfer Characteristics of a Loop Heat Pipe Heat Exchanger for High Speed Rotary Shaft Cooling,” J. Korean Soc. Manuf. Process Eng., Vol. 16, No. 4, pp. 147-152, 2017. https://doi.org/10.14775/ksmpe.2017.16.4.147
  5. Park, J. H., Park, H. S., Kim, S. T., Kang, G. M., “A Study on the Temperature Uniformity for the Anti-Corrosion Coating Process of Large-Sized Water Pipes,” J. Korean Soc. Manuf. Process Eng., Vol. 15, No. 6, pp. 35-40, 2016. https://doi.org/10.14775/ksmpe.2016.15.6.035
  6. Ohm, K.-C., “Freezing of Water and Generating Pressure of Fluid in Pipe,” Proceedings of Korean Council for College Education, Vol. 2, No. 4, pp. 497-504, 2001.
  7. Voller, V. R., Swaminathan, C. R., Thomas, B. G., “Fixed Grid Techniques for Phase Change Problems: A review,” International Journal for Numerical Methods in Engineering, Vol. 30, No. 4, pp. 875-898, 1990. https://doi.org/10.1002/nme.1620300419
  8. Bennon, W. D., Incropera, F. P., "A Continuum Model for Momentum, Heat and Species Transport in Binary Solid-Liquid Phase Change Systems in Model Formulation," International Journal of Heat and Mass Transfer, Vol. 30, No. 10, pp. 2161-2170, 1991. https://doi.org/10.1016/0017-9310(87)90094-9
  9. Carman, P. C., "Fluid Flow Through Granular Beds," Trans. the Institution of Chemical Engineers, Vol. 15, pp. 150-166, 1937.
  10. Metzner, A. B., “Rheology of Suspensions in Polymeric Liquids,” J. Rheology, Vol. 29, No. 6, pp. 739-775, 1985. https://doi.org/10.1122/1.549808
  11. Kikuchi, Y., Shigemasa, Y., Oe, A., Ogata, T., "Steady-State Freezing of Liquids in Laminar Flow between Two Parallel Plates," J. Nucl. Sci. Technol., Vol. 23, pp. 979-991, 1986. https://doi.org/10.1080/18811248.1986.9735086

피인용 문헌

  1. A Comparative Study on Fracture Property of Aluminum Foam DCB and TDCB Specimens for Type of Mode III on Thickness vol.36, pp.3, 2018, https://doi.org/10.7736/kspe.2019.36.3.263
  2. A Study on the Strength Characteristic of Compact Tension Specimen due to Internal Holes and Material vol.36, pp.7, 2018, https://doi.org/10.7736/kspe.2019.36.7.623
  3. U자형 배관 내 결빙에 대한 해석적 연구 vol.18, pp.12, 2018, https://doi.org/10.14775/ksmpe.2019.18.12.052
  4. Numerical Analysis of Freezing Phenomena of Water around the Channel Tube of MF Evaporator vol.19, pp.1, 2018, https://doi.org/10.14775/ksmpe.2020.19.01.114
  5. Solenoid 전동기의 냉각을 위한 수치해석적 연구 vol.19, pp.4, 2018, https://doi.org/10.14775/ksmpe.2020.19.04.099
  6. An Analytical Study on the Heat Transfer Characteristics of MF Evaporation Tubes Attached with a Fin vol.20, pp.1, 2021, https://doi.org/10.14775/ksmpe.2021.20.01.048