수산해양기술연구 (Journal of the Korean Society of Fisheries and Ocean Technology)

  • 제54권4호
  • /
  • Pages.343-352
  • /
  • 2018
  • /
  • 2671-9940(pISSN)
  • /
  • 2671-9924(eISSN)
한국수산해양기술학회 (The Korean Society of Fisheries and Ocean Technology)
권호 표지
DOI QR코드

DOI QR Code

견인되는 선박의 조종성능 개선에 관한 연구 : 시스템 모델링

A study on maneuvering performance improvement of a towed vessel without a power propulsion system: system modeling

  • 트란덕권 (부경대학교 대학원 기계시스템공학과) ;
  • 이동훈 (부경대학교 대학원 기계시스템공학과) ;
  • 김태완 (부경대학교 대학원 기계시스템공학과) ;
  • 김영복 (부경대학교 기계시스템공학과) ;
  • 박환철 (부경대학교 실습선)
  • TRAN, Duc-Quan (Department of Mechanical System Engineering, the Graduate School, Pukyong National University) ;
  • LEE, Dong-Hun (Department of Mechanical System Engineering, the Graduate School, Pukyong National University) ;
  • KIM, Tae-Wan (Department of Mechanical System Engineering, the Graduate School, Pukyong National University) ;
  • KIM, Young-Bok (Department of Mechanical System Engineering, Pukyong National University) ;
  • PARK, Hwan-Cheol (Training Ship Kaya, Pukyong National University)
  • 투고 : 2018.10.29
  • 심사 : 2018.11.16
  • 발행 : 2018.11.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, a motion control problem for the vessels towed by tugboats or towing ships on the sea is considered. The towed vessel looks like the barge ship, which is used for many purposes. In these vessels, basically, the power propulsion system is not installed but just towed by a towing vessel such as tugboats with ropes and wires. It means that the motions of towed vessel are basically dependent on the tracking route of towing boat. Therefore, in some cases, undesirable and unpredictable motions may be made by environmental factors such as wave, wind attack and so on. As a result, a collision accident with others may occur during maneuvering situation. Based on these facts, the authors try to encourage the steering performance of the towed vessel by using controllable rudders without any propulsion system. In this study, especially, a controllable vessel with three rudders is considered, and a mathematical model is induced for the future study. The model is described as surge, sway motion and inertia moment by following the general representation method for the surface ship.

키워드

참고문헌

  1. Akasaka N and Yamamoto M. 1999. Design method of ship's track keeping control system and verification by field test. Transaction of the Society of Instrument and Control Engineers 35, 934-942. (DOI:10.9746/sicetr1965.35.934)
  2. Bu R, Liu Z and Li T. 2007. Non linear sliding mode berthing control of underactuated surface ships. ICAA 2007. 1371-1376. (DOI:10.1109/icca.2007.4376584)
  3. Bui VP, Jeong JS, Kim YB and Kim DW. 2010. Optimal control design for automatic ship berthing by using bow and stern thrusters. Journal of Ocean Engineering and Technology 24(2), 10-17.
  4. Bui VP, Kawai H, Kim YB and Lee KS. 2011. A ship berthing system design with four tug boats. Journal of Mechanical Science and Technology 25(5), 1257-1264. (DOI:10.1007/s12206-011-0215-4)
  5. Bui VP and Kim YB. 2011. Development of constrained control allocation for ship berthing by using autonomous tugboats. International Journal of Control Automation and Systems 9(6), 1203-1208. (DOI:10.1007/s12555-011-0622-4)
  6. Duc LM. 2001. An automatic control system for ship harbour manoeuvres using decoupling control. Proceeding of the 2001 IEEE International Conference on Robotics and Automation, Seoul, Korea. (DOI:10.1109/robot. 2001.932918)
  7. Fossen TI. 2002. Marine Control System-Guidance, Navigation, Rigs and Underwater Vehicle, Trondheim, Norway: Norwegian University of Science and Technology.
  8. Kasasbeh YA, Pourzanjani MM and Dove MJ. 1993. Automatic berthing of ship, Proc. of the Institute of Marine Engineers, the 3rd International Conference on Maritime Communications and Control, London, 10-17.
  9. Lee DJ, Kim JK and Kim BS. 2000. Design of an automatic winch system for small fishing vessel. Journal of the Korean Society for Fisheries and Technology 36(3), 157-165.
  10. Takai T and Yoshihisa H. 1987. An automatic maneuvering system in berthing, Proc. 8th Ship Control System Symposium, 2, 183-201.
  11. Tran AMD, Ji SW and Kim YB. 2014. A ship berthing system design by cooperating with tugboats and dampers. Journal of Drive and Control 11(3), 7-13. (DOI:10.7839/ksfc.2014.11.3.007)
  12. Tran AMD and Kim YB. 2016. Dynamic identification and robust control performance evaluation of towing rope under rope length variation. Journal of the Korean Power System Engineering 20(2), 58-65. (DOI:10.9726/kspse.2016.20.2.058)
  13. Yamato H, Uetsuki H and Koyama T. 1990. Automatic berthing by the neural controller, Proc. 9th Ship Control Systems Symposium, USA, 3, 183-201. (DOI:10.1016/s1474-6670(17)35058-9)
  14. Zhang Y, Hearn GE and Sen P, 1997, A multivariable neural controller for automatic ship berthing, Journal of IEEE Control System 17, 31-44. (DOI:10.1109/37.608535)