Textile Science and Engineering (한국섬유공학회지)

The Korean Fiber Society (한국섬유공학회)
권호 표지
DOI QR코드

DOI QR Code

Curing Behavior and Thermal Properties of DGEBA/phenol Novolac Epoxy Resin

DGEBA/phenol Novolac 에폭시 수지의 경화거동 및 열적 특성

  • Jeong, Jin Wook (Department of Advanced Organic Materials & Textile System Engineering, Chungnam National University) ;
  • Won, Jong Sung (Department of Advanced Organic Materials & Textile System Engineering, Chungnam National University) ;
  • Jo, Won Gi (Department of Advanced Organic Materials & Textile System Engineering, Chungnam National University) ;
  • Cho, Ho Hyeon (Department of Textile and Fashion Design, Seojeong College) ;
  • Kim, Eui Hwa (Department of Textile Materials Engineering, Shinhan University) ;
  • Lee, Seung Goo (Department of Advanced Organic Materials & Textile System Engineering, Chungnam National University)
  • 정진욱 (충남대학교 유기소재.섬유시스템공학과) ;
  • 원종성 (충남대학교 유기소재.섬유시스템공학과) ;
  • 조원기 (충남대학교 유기소재.섬유시스템공학과) ;
  • 조호현 (서정대학교 섬유패션디자인과) ;
  • 김의화 (신한대학교 섬유소재공학과) ;
  • 이승구 (충남대학교 유기소재.섬유시스템공학과)
  • Received : 2018.01.20
  • Accepted : 2018.02.20
  • Published : 2018.02.28
⟨ Previous Next ⟩

Abstract

To enhance the viscosity and thermal resistance of DGEBA epoxy resin, a phenol novolac-type epoxy resin was added to a hot melt-type epoxy prepreg. The mixtures of DGEBA solid and liquid epoxy resin, and phenol novolac epoxy resin were prepared with different mixing ratios. The effect of the mixing ratio on the curing behavior, thermal stability and viscosity of the blended epoxy resin was investigated. The curing behavior did not vary significantly with the mixing ratio. The activation energy increased as the content of phenol novolac-type epoxy resin was increased up to 40 wt%. The thermal resistance and viscosity of the mixed epoxy resin increased significantly when the phenol novolac-type epoxy resin and solid epoxy resin occupied more than 20 wt%.

Keywords

References

  1. C. A. Mahieux, "Cost Effective Manufacturing Process of Thermoplastic Matrix Composites for the Traditional Industry: the Example of Carbon-fiber Reinforced Thermoplastic Lywheel", Compos. Struct., 2001, 52, 517-521. https://doi.org/10.1016/S0263-8223(01)00041-1
  2. H. J. Lim and K. H. Chung, "Study on the Compositional Construction of Epoxy Based Powder Paint," Clean Technol., 2006, 12, 27-35.
  3. G. Carra and Carvelli, "Ageing of Pultruded Glass Fibre Reinforced Polymer Composites Exposed to Combined Environmental Agents," Compos. Struct., 2014, 108, 1019- 1026. https://doi.org/10.1016/j.compstruct.2013.10.042
  4. B. Ellis, Ed., "Chemistry and Technology of Epoxy Resins", Chapman&Hall, London, 1993.
  5. S. Zhandarov and E. Mader, "Characterization of Fiber/matrix Interface Strength: Applicability of Different Tests, Approaches and Parameters", Compos. Sci. Technol., 2005, 65, 149-160. https://doi.org/10.1016/j.compscitech.2004.07.003
  6. R. S. Sikarwar, R. Velmurugan, and N. K. Gupta, "Influence of Fiber Orientation and Thickness on the Response of Glass/ epoxy Composites Subjected to Impact Loading", Composites: Part B, 2014, 60, 627-636. https://doi.org/10.1016/j.compositesb.2013.12.023
  7. S. J. Park, M. K. Seo, J. R. Lee, and D. R. Lee, "Isothermal Cure Kinetics of Epoxy/Phenol-novolac/Latent Catalyst System", J. Korean Fiber Soc., 1999, 36, 715-724.
  8. R. M. Baucom and J. M. Marchello, "LaRC Dry Powder Towpreg System", NASA TM, 102,648 (1990).
  9. F. Maldonado, J. F. Marquez, A. Nohara, and P. Kyle, " Tow Prepreg and System and Method for Forming the Same", US Patent, 0,120,251,823 (2012).
  10. M. L. Costa, E. C. Botelho, J. M. F. Paiva, and M. C. Rezende, "Characterization of Cure of Carbon/Epoxy Prepreg Used in Aerospace Field", Mater. Res., 2005, 8, 317-322. https://doi.org/10.1590/S1516-14392005000300016
  11. M. F. Grenier-Liustalot, M. P. Bente, and P. Grenier, "Reactivite Du Dicyandiamide vis a vis Des Groupements O et Nepoxyde-1. Mecanisme Reactionnel", Eur. Polym. J., 1991, 27, 1201-1216. https://doi.org/10.1016/0014-3057(91)90057-U
  12. Y. G. Lin, H. Sautereau, and J. P. Pascault, "Processing Property Relationship for Dicyandiamide-cured Epoxy Networks", J. Appl. Polym. Sci., 1987, 33, 685-691. https://doi.org/10.1002/app.1987.070330229