DOI QR코드

DOI QR Code

An Improved Analytic Model for Power System Fault Diagnosis and its Optimal Solution Calculation

  • Wang, Shoupeng (School of Electrical and Electronic Engineering, North China Electric Power University) ;
  • Zhao, Dongmei (School of Electrical and Electronic Engineering, North China Electric Power University)
  • Received : 2017.05.04
  • Accepted : 2017.08.21
  • Published : 2018.01.01

Abstract

When a fault occurs in a power system, the existing analytic models for the power system fault diagnosis could generate multiple solutions under the condition of one or more protective relays (PRs) and/or circuit breakers (CBs) malfunctioning, and/or an alarm or alarms of these PRs and/or CBs failing. Therefore, this paper presents an improved analytic model addressing the above problem. It takes into account the interaction between the uncertainty involved with PR operation and CB tripping and the uncertainty of the alarm reception, which makes the analytic model more reasonable. In addition, the existing analytic models apply the penalty function method to deal with constraints, which is influenced by the artificial setting of the penalty factor. In order to avoid the penalty factor's effects, this paper transforms constraints into an objective function, and then puts forward an improved immune clonal multi-objective optimization algorithm to solve the optimal solution. Finally, the cases of the power system fault diagnosis are served for demonstrating the feasibility and efficiency of the proposed model and method.

Keywords

E1EEFQ_2018_v13n1_89_f0001.png 이미지

Fig. 1. Procedure of the improved immune clonal multi-objective optimization algorithm

E1EEFQ_2018_v13n1_89_f0002.png 이미지

Fig. 2. Electrical connection diagram of a local power grid

E1EEFQ_2018_v13n1_89_f0003.png 이미지

Fig. 3. Typical 4-substation power system

Table 1. Fault alarms received by the power dispatching center

E1EEFQ_2018_v13n1_89_t0001.png 이미지

Table 2. Comparison of top three optimal solutions

E1EEFQ_2018_v13n1_89_t0002.png 이미지

Table 3. Comparison of diagnostic results based on different analytic model-based methods

E1EEFQ_2018_v13n1_89_t0003.png 이미지

References

  1. Y. S. Ko, "A Study on the Agent (Protective Device)- based Fault Determination and Separation Methodology for Smart Grid Distribution System," Journal of Electrical Engineering & Technology, vol. 10, no. 1, pp. 102-108, Jan. 2015. https://doi.org/10.5370/JEET.2015.10.1.102
  2. C. Wattanasakpubal and T. Bunyagul, "Algorithm for Detecting, Identifying, Locating and Experience to Develop the Automate Faults Location in Radial Distribution System," Journal of Electrical Engineering & Technology, vol. 5, no. 1, pp. 36-44, Jan. 2010. https://doi.org/10.5370/JEET.2010.5.1.036
  3. C. Fukui and J. Kawakami, "An Expert System for Fault Section Estimation Using Information from Protective Relays and Circuit Breakers," IEEE Trans. Power Delivery, vol. 1, no. 4, pp. 83-90, Oct. 1986. https://doi.org/10.1109/TPWRD.1986.4308033
  4. V. N. Ghate and S. V. Dudul, "Induction Machine Fault Detection Using Generalized Feed Forward Neural Network," Journal of Electrical Engineering & Technology, vol. 4, no. 3, pp. 389-395, 2009. https://doi.org/10.5370/JEET.2009.4.3.389
  5. G. Mani and J. Jerome, "Intuitionistic Fuzzy Expert System based Fault Diagnosis using Dissolved Gas Analysis for Power Transformer," Journal of Electrical Engineering & Technology, vol. 9, no. 6, pp. 2058-2064, Nov. 2014. https://doi.org/10.5370/JEET.2014.9.6.2058
  6. X. Luo and M. Kezunovic, "Implementing Fuzzy Reasoning Petri-nets for Fault Section Estimation," IEEE Trans. Power Delivery, vol. 23, no. 2, pp. 676- 685, Apr. 2008. https://doi.org/10.1109/TPWRD.2008.915809
  7. X. H. Luo and X. Y. Tong, "Structure-variable Bayesian Network for Power System Fault Diagnosis Considering Credibility," Power System Technology, vol. 39, no. 9, pp. 2658-2664, Sep. 2015.
  8. C. L. Hor, P. A. Crossley and S. J. Watson, "Building Knowledge for Substation-based Decision Support Using Rough Sets," IEEE Trans. Power Delivery, vol. 22, no. 3, pp. 1372-1379, July 2007. https://doi.org/10.1109/TPWRD.2006.886783
  9. X. N. Lin, S. H. Ke, Z. T. Li, H. L. Weng and X. H. han, "A Fault Diagnosis Method of Power Systems Based on Improved Objective Function and Genetic Algorithm-Tabu Search," IEEE Trans. Power Delivery, vol. 25, no. 3, pp. 1268-1274, July 2010. https://doi.org/10.1109/TPWRD.2010.2044590
  10. F. S. Wen and Z. X. Han, "Fault Section Estimation in Power Systems Using Genetic Algorithm and Simulated Annealing," Proceedings of the CSEE, vol. 14, no. 3, pp. 29-35, May 1994.
  11. F. S. Wen and Z. X. Han, "Fault Section Estimation in Power Systems Using a Genetic Algorithm," Electric Power Systems Research, vol. 34, no. 3, pp. 165-172, Feb. 1995. https://doi.org/10.1016/0378-7796(95)00974-6
  12. W. X. Guo, F. S. Wen, G. Ledwich, Z. W. Liao, X. Z. He and J. H. Liang, "An Analytic Model for Fault Diagnosis in Power Systems Considering Malfuctions of Protective Relays and Circuit Breakers," IEEE Trans. Power Delivery, vol. 25, no. 3, pp. 1393-1401, July 2010. https://doi.org/10.1109/TPWRD.2010.2048344
  13. D. B. Liu, X. P. Gu and H. P. Li, "A Complete Analytic Model for Fault Diagnosis of Power Systems," Proceedings of the CSEE, vol. 31, no. 34, pp. 85-93, Dec. 2011.
  14. D. M. Zhao, X. Zhang, J. Wei, W. C. Liang and D. Y. Zhang, "Power Grid Fault Diagnosis Aiming at Reproducing the Fault Process," Proceedings of the CSEE, vol. 34, no. 13, pp. 2116-2123, May 2014.
  15. R. H. Shang, L. C. Jiao, C. X. Hu and J. J. Ma, "Modified Immune Clonal Constrained Multi- Objective Optimization Algorithm," Journal of Software, vol. 23, no. 7, pp. 1773-1786, July 2012. https://doi.org/10.3724/SP.J.1001.2012.04108
  16. R. H. Shang, L. C. Jiao and W. P. Ma, "Immune Clonal Multi-Objective Optimization Algorithm for Constrained Optimization," Journal of Software, vol. 19, no. 11, pp. 2943-2956, Nov. 2008. https://doi.org/10.3724/SP.J.1001.2008.02943
  17. M. Prais and A. Bose, "A Topology Processor That Tracks Network Modifications over Time," IEEE Trans. Power Systems, vol. 3, no. 2, pp. 992-998, Aug.1988. https://doi.org/10.1109/59.14552