Fig. 1 Schematic diagram of forging processes in Multi-Axial Diagonal Forging(MADF)
Fig. 2 Schematic diagram showing MADF process
Fig. 3 Multi-axial diagonal forged OFC specimens
Fig. 4 Photos showing the analyzed part
Fig. 5 IPF Map(Z) of initial as-extruded OFC
Fig. 6 Inverse Pole Figure Map(Z) of MADF processed OFC
Fig. 7 The average grain size of MADF processed OFC for various cycles
Fig. 8 The average Misorientation of MADF processed OFC for various cycles
Fig. 10 The average Vickers hardness of MADF processed OFC for various cycles
Fig. 9 The average GOS of MADF processed OFC for various cycles
Table 1 The average grain size of the MADF processed OFC for various cycles
Table 2 The average Vickers hardness of the MADF processed OFC for various cycles
참고문헌
- Azushima, A., Kopp, R., Korhonen, A., Yang, D. Y., Micari, F., Lahoti, G. D., & Yanagida, A, 2008, Severe plastic deformation (SPD) processes for metals. CIRP Annals, Vol. 57, No. 2, pp. 716-735. https://doi.org/10.1016/j.cirp.2008.09.005
- Iwahashi, Y., Horita, Z., Nemoto, M., & Langdon, T. G, 1998, The process of grain refinement in equal-channel angular pressing. Acta materialia, Vol. 46, No. 9, pp.3317-3331. https://doi.org/10.1016/S1359-6454(97)00494-1
- Hwang, Y. M., & Tzou, G. Y, 1997, Analytical and experimental study on asymmetrical sheet rolling. International Journal of Mechanical Sciences, Vol. 39 No. 3, pp. 289-303. https://doi.org/10.1016/S0020-7403(96)00024-0
- Lee, S. H., & Lee, D. N, 2001, Analysis of deformation textures of asymmetrically rolled steel sheets. International journal of mechanical sciences, Vol. 43, No. 9, pp. 1997-2015. https://doi.org/10.1016/S0020-7403(01)00025-X
- Estrin, Y., & Vinogradov, A, 2013, Extreme grain refinement by severe plastic deformation: A wealth of challenging science. Acta materialia, Vol. 61, No. 3, pp. 782-817. https://doi.org/10.1016/j.actamat.2012.10.038
- Valiev, R. Z., Estrin, Y., Horita, Z., Langdon, T. G., Zechetbauer, M. J., & Zhu, Y. T, 2006, Producing bulk ultrafine-grained materials by severe plastic deformation. Jom, Vol. 58, No. 4, pp.33-39. https://doi.org/10.1007/s11837-006-0213-7
- Valiev, R. Z., Islamgaliev, R. K., & Alexandrov, I. V, 2000, Bulk nanostructured materials from severe plastic deformation. Progress in materials science, Vol. 45, No. 2, pp.103-189. https://doi.org/10.1016/S0079-6425(99)00007-9
- Cherukuri, B., Nedkova, T. S., & Srinivasan, R, 2005, A comparison of the properties of SPD-processed AA-6061 by equal-channel angular pressing, multi-axial compressions/forgings and accumulative roll bonding. Materials Science and Engineering: A, Vol. 410, pp. 394-397.
- Khan, A. S., & Meredith, C. S, 2010, Thermo-mechanical response of Al 6061 with and without equal channel angular pressing (ECAP). International Journal of Plasticity, Vol. 26, No. 2, pp.189-203. https://doi.org/10.1016/j.ijplas.2009.07.002
- Alexandrov, I. V., Dubravina, A. A., Kilmametov, A. R., Kazykhanov, V. U., & Valiev, R. Z, 2003, Textures in nanostructured metals processed by severe plastic deformation. Metals and materials International, Vol. 9, No. 2, pp.151-156. https://doi.org/10.1007/BF03027271
- Li, S., Gazder, A. A., Beyerlein, I. J., Davies, C. H., & Pereloma, E. V, 2007, Microstructure and texture evolution during equal channel angular extrusion of interstitial-free steel: Effects of die angle and processing route. Acta materialia, Vol. 55, No. 3, pp.1017-1032. https://doi.org/10.1016/j.actamat.2006.09.022
- Kalidindi, S. R., Donohue, B. R., & Li, S, 2009, Modeling texture evolution in equal channel angular extrusion using crystal plasticity finite element models. International Journal of Plasticity, Vol. 25, No. 5, pp.768-779. https://doi.org/10.1016/j.ijplas.2008.06.008
- Rajan, P. R., Monnet, I., Hug, E., Etienne, A., Enikeev, N., Keller, C., Radiguet, B, 2014, Irradiation resistance of a nanostructured 316 austenitic stainless steel. In IOP Conference Series: Materials Science and Engineering, Vol. 63, No. 1, pp. 012121. IOP Publishing.
- Yang, S. - H., Lee, S., Lee, S. - H., Jeong, H. - T., Cho, Y. - Y., 2016, Microstructure and texture control method of tantalum, Korea Patent, Registration No 1016320240000
- Lee, S., Yang, S. - H., Lee, S. - H., Jeong, H. - T., Cho, Y. - Y., 2016, Manufacturing method for metal, Korea Patent, Registration No 1016306670000
- Kwon, S. -C., Kim, S. -T., Kim, D. -V., Lee, J. -K. Seo, S. -J., Yoon, T. S., Jeong, H. -T. 2018, Mechanical properties of OFC copper fabricated by multi-axial diagonal forging(MADF), Trans. Mater. Process., Vol. 27, No. 4, pp. 250-256. https://doi.org/10.5228/KSTP.2018.27.4.250
- Jeong, H.-T., Kim, M. S., Kwon, S. -C., Kim, S. -T., Lee, S., Choi, S.-H., 2018, Comparison between multi-axial forging and multi-axial diagonal forging of AA1100 using Finite Element Analysis, Korean J. Metals and Mater., (Accepted).
- Kundu, A., Kapoor, R., Tewari, R., & Chakravartty, J. K., 2008, Severe plastic deformation of copper using multiple compression in a channel die, Scripta Materialia, Vol. 58, No. 3, pp.235-238. https://doi.org/10.1016/j.scriptamat.2007.09.046