바이오 폴리우레탄과 석유기반 폴리우레탄의 물성 비교

Property Comparison of Bio-Polyurethane and Petroleum based Polyurethane

  • 이담희 (한국기술교육대학교 에너지신소재화학공학과) ;
  • 이관희 (한국기술교육대학교 에너지신소재화학공학과) ;
  • 조을룡 (한국기술교육대학교 에너지신소재화학공학과)
  • Lee, Dam Hee (School of Energy, Materials, Chemical Engineering, Korea University of Technology Education) ;
  • Lee, Kwan Hee (School of Energy, Materials, Chemical Engineering, Korea University of Technology Education) ;
  • Cho, Ur Ryong (School of Energy, Materials, Chemical Engineering, Korea University of Technology Education)
  • 투고 : 2018.06.09
  • 심사 : 2018.06.21
  • 발행 : 2018.06.30

초록

The three polyols, poly(trimethylene ether) glycol 2000, poly(tetramethylene ether) glycol 2000 and poly (tetramethylene ether) glycol 1000 were reacted with 4,4-diphenylmethane diisocyanate to get polyurethanes. The synthesized three polyurethanes were measured by FT-IR, NMR for investigating chemical structures. Through two spectroscophical methods, It is found that urethane group exists in the three polymers. From the evaluation of hardness, glass transition temperature, tensile strength, and water resistance, the results showed increasing order of Poly(tetramethylene ether) glycol 1000 > Poly(trimethylene ether) glycol 2000 > Poly(tetramethylene ether) glycol 2000 with the content of hard segment in polyurethane.

키워드

참고문헌

  1. Kyung Ho Jin, Min Su Kim, and Ur Ryong Cho, "A study on polyurethane adhesive based polyester polyol polymerized from sebacic Acid", Elastomers and Composites, Vol. 48, pp. 90-94, 2013.
  2. Jong-Sung Ko, Jin-Hui Lee, and Ki-Chun Sung, "A study on the bio-based polyurethane", Journal of the Korean Oil Chemists' Society, Vol. 29, pp. 531-542, 2012.
  3. Shin Hye Kang, Ji-Hwan Oh, Xiangxu Li, and Ur Ryong Cho, "Improvement of the physical properties of the thermoplastic polyurethane using a modified waste tire powder", Polymer(Korea), Vol. 41, pp. 656-661, 2017.
  4. Joo-Weon Ock, Poongki Kim, Hyunsang Cho, Oh Kyung Kwon, Wonwook Jung, and Joonseok Koh, "Synthesis and characterization of eco-friendly polyurethane incorporating soybean-oil-based polyol", Vol. 52, pp. 320-324, 2015. https://doi.org/10.12772/TSE.2015.52.320
  5. Hyun Kwon, Su Heon Lee, Sang Bum Kim1, Moon-Soo Bang, and Youn Cheol Kim, "Effects of catalysts and blowing agents on the physical properties and cell morphology of polyurethane foams", Journal of the Korean Industrial and Engineering Chemistry, Vol. 16, pp. 379-384, 2005.
  6. Kyung Ho Jin, and Ur Ryong Cho, "A study on structure analysis and synthesis of polyester polyol & polyurethane", Elastomers and Composites, Vol. 49, pp. 31-36, 2014. https://doi.org/10.7473/EC.2014.49.1.31
  7. Chan Young Park, "Effect of PPG, MDI, 2-HEMA and butyl acrylate content on the properties of polyurethane adhesive", Elastomers and Composites, Vol. 49, pp. 245-252, 2014. https://doi.org/10.7473/EC.2014.49.3.245
  8. Kwang In Kim, and Sang Bum Kim, "Research trend of bio-polyurethane", KIC News), pp. 11-18, 2012.
  9. Jong-Sung Ko, Jin-Hui Lee, and Ki-Chun Sung, "A study on the bio-based polyurethane", J. of Korean Oil Chemists' Soc, Vol. 29, pp. 531-542, 2012.
  10. Jong-Min Kim, Jeong-Hyeon Kim, Young-Rak Choe, Sung Kyun Park, Kang Hyun Park, and Jea-Myung Lee, "Effect of graphene oxide on mechanical characteristics of polyurethane foam", Journal of the korean Society of Marine Engineering, Vol. 40, pp. 493-498, 2016. https://doi.org/10.5916/jkosme.2016.40.6.493
  11. Kyeong-Kyu Park, and Sang-Ho Lee, "Synthesis of melamine phosphate-polyurethane composite foam blown by water and characterization of its thermal properties", Polymer(Korea), Vol. 38, pp. 441-448, 2014.