Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집)

Korean Tunnelling and Underground Space Association (한국터널지하공간학회)
권호 표지
DOI QR코드

DOI QR Code

Optimization of tunnel support patterns using DEA

차분진화 알고리즘을 적용한 터널 지보패턴 최적화

  • 강경남 (인하대학교 토목공학과) ;
  • 안준상 ((주)베이시스소프트 건설IT연구소) ;
  • 김병찬 ((주)베이시스소프트 건설IT연구소) ;
  • 송기일 (인하대학교 토목공학과)
  • Received : 2017.12.19
  • Accepted : 2018.01.08
  • Published : 2018.01.31
Download PDF
⟨ Previous Next ⟩

Abstract

It is important to design tunnel support system considering the various loads acting on the tunnel because they have a direct impact on the stability of tunnels. In Korea, standardized support patterns are defined based on the rock mass classification system depending on the project, and it is stated that it should be modified appropriately considering the behavior of tunnel during construction. In this study, the tunnel support pattern optimization method is suggested based on the convergence-confinement method, earth pressure, axial force of rock bolt, and moment acting on the shotcrete. The length and spacing of the rock bolts and the thickness of the shotcrete were optimized by using the differential evolution algorithm (DEA) and the results were compared to the standard support pattern III for railway tunnel. Rock bolt length can be reduced and the installation interval can be widened for shallow tunnel. As the depth of tunnel increases, the thickness of shotcrete increases linearly. Therefore, the thickness of shotcrete should be thicker than the standard support pattern as the depth of tunnel increases to secure the stability of tunnel.

터널의 지보패턴 설계는 터널의 안정성에 직접적인 영향을 끼치기 때문에 터널에 작용하는 다양한 하중들을 적절히 고려하여야 한다. 국내에서는 프로젝트에 따라 암반분류법을 기반으로 표준 지보패턴을 정의하고 있으며, 시공 시 터널거동을 고려하여 적절히 수정되어야 한다고 기술되어 있다. 본 연구에서는 내공변위제어법, 토압, 록볼트의 축력 및 숏크리트의 모멘트 등을 종합적으로 고려하여 지보패턴을 최적화할 수 있는 방법을 제시하고자 한다. 차분진화알고리즘(DEA)을 적용하여 터널 심도에 따라 록볼트의 길이 및 간격, 숏크리트의 두께를 최적화하였으며, 도출된 결과를 철도터널의 표준지보패턴(3등급)과 비교하였다. 천층지반에서 록볼트의 길이는 표준지보패턴보다는 짧아질 수 있으며, 간격은 넓어질 수 있다. 터널의 심도가 깊어질수록 숏크리트의 두께는 선형적으로 증가하는 것으로 나타났다. 따라서, 숏크리트의 두께는 심도가 깊어질수록 표준지보패턴보다는 두꺼워져야 터널의 안정성을 확보할 수 있는 것으로 나타났다.

Keywords

References

  1. Bieniawski, Z. T.(1973), "Engineering classification of jointed rock masses", Civil Engineer in South Africa, Vol. 15, No. 12, pp. 343-353.
  2. Carbonell, A., Fernando, G.V., Víctor, Y. (2011), "Design of reinforced concrete road vaults by heuristic optimization", Advances in Engineering Software, Vol. 42, No. 4, pp. 151-159. https://doi.org/10.1016/j.advengsoft.2011.01.002
  3. Carranza-Torres, C., Fairhurst, C. (2000), "Application of the convergence-confinement method of tunnel design to rock masses that satisfy the Hoek-Brown failure criterion", Tunnelling and Underground Space Technology, Vol. 15, No. 2, pp. 187-213. https://doi.org/10.1016/S0886-7798(00)00046-8
  4. Hong, C.W., Jeon, S.W. (2005), "Optimal estimation of rock mass properties using genetic algorithm", Tunnel and Underground Space, Vol. 15, No. 2, pp. 129-136.
  5. Kim, B.C., Moon, H.K. (2016), "A study on the optimization technique for the plan of slope reinforcement arrangement of soil-nailing in tunnel portal area", Journal of Korean Tunnelling and Underground Space Association, Vol. 18, No. 6, pp. 569-579. https://doi.org/10.9711/KTAJ.2016.18.6.569
  6. KR (2012), "Tunnel support, KR C-12030", KR (Korea Rail Network Authority). (in Korean)
  7. MOLIT (2015), "Tunnel standard specification", MOLIT (Ministry of Land, Transport and Maritime Affairs). (in Korean)
  8. Park, C.S., Kang, M.H. (2010), "A study on the numerical analysis of a NATM tunnel with consideration of construction procedure and field measurement", Tunnel and Underground Space, Vol. 20, No. 1, pp. 28-38.
  9. Ryu, D.H., Kim, S.C., Lee, C.J., Park, J.Y., Lim, J.G., Moon, J.W. (2012), "A study on the application based on the equations of loosening loads for the optimized design of concrete lining", Korean Society for Railway, pp.7-18.
  10. Storn, R., Price, K. (1997), "Differential evolution-a simple and efficient heuristic for global optimization over continuous spaces", Journal of Global Optimization, Vol. 11, No. 4, pp. 341-359. https://doi.org/10.1023/A:1008202821328
  11. Unal, E. (1986), "Empirical approach to calculate rock loads in coal mine roadways", Proceedings of the 5th Annual Conference on Ground Control in Mining, WV University, pp. 234-241.
  12. Yin, L., Yang, W. (2000), "Topology optimization for tunnel support in layered geological structures", International Journal for Numerical Methods in Engineering, Vol. 47, No. 12, pp. 1983-1996. https://doi.org/10.1002/(SICI)1097-0207(20000430)47:12<1983::AID-NME863>3.0.CO;2-N