위성 배터리 충전을 위한 태양전력조절기의 제어기 고장 분석

Failure Analysis of Solar Array Regulator Controller for Charging Satellite Battery

  • 투고 : 2017.11.17
  • 심사 : 2017.11.23
  • 발행 : 2017.12.31

초록

저궤도 인공위성은 전기 에너지 원으로 주로 태양전지 배열기를 사용한다. 태양전지 배열기는 인공위성이 식구간에 들어가면 전기 에너지를 발생시키지 못하므로, 식구간에서는 배터리가 인공위성에 전기 에너지를 공급한다. 또한 태양전지 배열기는 동작 전압에 따라 출력하는 전력이 변하며, 최대 전력을 출력하는 최대전력점이 존재한다. 일광구간에서 태양전지 배열기가 최대전력을 출력하여 위성에 전기 에너지를 공급하고 남은 에너지로 배터리를 충전할 수 있도록 태양전력 조절기기가 필요하다. 태양전력 조절기의 입력에는 태양전지 배열기가 연결되고, 출력에는 배터리가 연결된다. 태양전력 조절기는 안정적인 동작을 위해 2 of 3 Hot Redundant로 동작한다. 즉, 3개의 DC-DC 컨버터가 하나의 태양전력 조절기를 구성하며, 이 DC-DC 컨버터 하나가 고장이 발생하더라도 태양전력 조절기는 안정적으로 동작한다. 본 논문에서는 태양전력 조절기 동작 중 DC-DC 컨버터의 제어기에 고장이 발생한 순간 태양전력 조절기가 어떻게 동작하는지 분석하고, 배터리와 태양전지 배열기에 어떠한 영향을 미치는가에 대하 분석한다.

A solar array is main electrical energy source for Low-Earth-Orbit(LEO) satellite. The solar array cannot generate electrical energy during eclipse period, a battery supply electrical energy to the satellite. The electrical power of the solar array is changed in accordance with operating voltage and the solar array has the maximum power point. The solar array regulator makes the solar array supply electrical energy to the satellite and charge the battery. The solar array is connected to the solar array regulator input and the battery is connected to the solar array regulator output. The solar array regulator consists 2 of 3 hot redundant. One solar array regulator contains 3 DC-DC converters, and the solar array regulator operates stably even if the failure occur in one DC-DC converter. In this paper, the solar array regulator, the battery and the solar array operation is analyzed when the failure occur in one DC-DC converter.

키워드

참고문헌

  1. Mourra, O., Fernandez, A., Tonicello, F., "Buck Boost Regulator (BR) forspacecraft Solar Array Powerconversion", Applied Power Electronics Conference and Exposition (APEC), pp. 1313-1319, 2010
  2. Haibo Qiao, Yicheng Zhang, Yongtao Yao, Li Wei "Analysis of Buck-Boost Converters forFuel Cell Electric Vehicles", Vehicular Electronics and Safety, 2006. ICVES 2006. IEEE International Conference on, pp. 109-113, 2006