DOI QR코드

DOI QR Code

A Research on Analytic method of determining Penetration Factor and Deposition Rate for Predicting Indoor Particle Concentration

실내 미세먼지 농도 예측을 위한 침입계수 및 침착률 산정방법에 관한 연구

  • Received : 2015.05.31
  • Accepted : 2017.10.10
  • Published : 2017.11.30

Abstract

Airtightness of modern buildings has been increased and people are staying indoors about 20 hours a day. As indoor residence time increase, effect of indoor air quality on health got higher. Deposition rate and penetration factor are important factors for predicting indoor particle concentration. However, these values can be determined differently during analyzing process. In this paper uncertainty of determining deposition rate and penetration factor that comes from entering different input data is experimentally examined. As a result, deposition rate got higher as particle size increase and penetration factor got lower as particle size increase, but these value could be changed as input data changes even if experiment was passed off in same place. For calculating correct deposition rate and penetration factor, standard for setting input data has to be established and experiment has to be repeated many times.

Keywords

Acknowledgement

Supported by : 한국환경산업기술원(KEITI), 한국연구재단

References

  1. Alzona, J., Cohen, L., Rudolph, H., Jow, N., & Frohliger, O. (1979). Indoor-.outdoor relationships for airborne particle matter of outdoor origin, Atmospheric Environment, 13, 55-60. https://doi.org/10.1016/0004-6981(79)90244-0
  2. Chao, C., Wan, P., & Cheng ,E. (2003). Penetration coefficient and deposition rate as a function of particle size in non-smoking naturally ventilated residences, Atmospheric Environment, 37, 4233-4241. https://doi.org/10.1016/S1352-2310(03)00560-0
  3. Chen, C., & Zhao, B. (2011). Review of relationship between indoor and outdoor particles: I/O ratio, infiltration factor and penetration factor, Atmospheric Environment, 45, 275-288. https://doi.org/10.1016/j.atmosenv.2010.09.048
  4. He, C., Morawska, L., & Gilbert, D. (2005). Particle deposition rates in residential houses, Atmospheric Environment, 39, 3891-3899. https://doi.org/10.1016/j.atmosenv.2005.03.016
  5. Fogh, C., Byrne, M., Roed, J., & Goddard, A. (1997). Size specific indoor aerosol deposition measurements and derived I/O concentration ratios, Atmospheric Environment, 31, 2193-2203. https://doi.org/10.1016/S1352-2310(97)00037-X
  6. Sehmel, G. (1980). Particle and gas dry deposition: A review, Atmospheric Environment, 14, 983-1011. https://doi.org/10.1016/0004-6981(80)90031-1
  7. Long, C., Suh, H., Catalano, P., & Koutrakis, P. (2001). Using time- and size-resolved particulate data to quantify indoor penetration and deposition behavior, Environmental Science and Technology, 35, 2089-2099. https://doi.org/10.1021/es001477d
  8. Mosley, R., Greenwell, D., Sparks, L., Guo, Z., Tucker, W., Fortmann, R., & Whitfield, C. (2001). Penetration of ambient fine particles into the indoor environment. Aerosol Science and Technology, 34, 127-136. https://doi.org/10.1080/02786820117449
  9. Ministry of Environment(2014), Interior Fine Dust Management manual, Korea.
  10. Ministry of Environment(2003), Comprehensive Measures to Prevent Dust Damage, Korea.
  11. National Institute of Environmental Research(2010), Research on Residential Indoor Air Quality Management Plan(2), Korea.
  12. Thatcher, T., Lai, A., Jachson, R., Sextro, R., & Nazaroff, W. (2002). Effect of room furnishings and air speed on particle deposition rates indoors, Atmospheric Environment, 36, 1811-1819. https://doi.org/10.1016/S1352-2310(02)00157-7
  13. Vette, A., Rea, A., Lawless, P., Rodes, C., Evans, G., Highsmith, V., & Sheldon, L. (2001). Characterization of indoor-outdoor aerosol concentration relationships during the Fresno PM exposure studies, Aerosol Science and Technology, 34, 118-126. https://doi.org/10.1080/02786820117903