DOI QR코드

DOI QR Code

소형 시뮬레이터를 이용한 차량거동요소별 승차감 민감도 평가

Evaluation of Ride Quality Sensitivity on Vehicle Dynamic Behavior Using a Small Scale Simulator

  • 이재훈 (한국도로공사 도로교통연구원) ;
  • 손덕수 (한국도로공사 도로교통연구원) ;
  • 박제진 (한국도로공사 도로교통연구원) ;
  • 문형철 ((주)로드텍)
  • 투고 : 2017.08.24
  • 심사 : 2017.09.21
  • 발행 : 2017.10.16

초록

PURPOSES: This study aims to evaluate the effects of vehicle dynamic behaviors on ride quality. METHODS : Simulation and field test were conducted to analyze the behavior of a driving vehicle. The simulation program CarSIM was applied and an INS (Inertial Navigation System) was used for field experiments. A small simulator was developed to simulate vehicle behavior such as roll, pitch, and bounce. The panels evaluated the ride quality in five stages from "very satisfied"to "very dissatisfied."Experiments were conducted on a total of 144 cases of vehicle behavior combinations. RESULTS :In both simulation and field tests, pitch is the largest and yaw the smallest. Especially in the field test, the amount of yaw is very low, about 7% of pitch and 18% of roll. The sensitive and extensive analysis conducted related ride quality with changing the frequency and amplitude. It was found that the most sensitive frequency range is 8 Hz across all amplitudes. Moreover, the combination of the roll and bounce was most sensitive to the ride quality at the low-frequency range. CONCLUSIONS : This result show that the vertical vehicle behavior (bounce) as well as the rotational behavior (roll and pitch) are highly correlated with ride quality. Therefore, it is expected that a more reasonable roughness index can be developed through a combination of vertical and rotational vehicle behavior.

키워드

참고문헌

  1. Holbrook, L. F. (1970). "Prediction of Subjective Response to Road Roughness by Use of the Rapid Travel Profilometer." Highway Research Record 291, pp.212-226.
  2. Hutchinson, B. G. (1963). "Principle of Subjective Rating Scale Construction." Highway Research Record 46, pp.60-70.
  3. International Organization for Standardization (1997). Mechanical vibration and shock - Evaluation of human exposure to wholebody vibration, ISO-2631-1.
  4. Jiang, Z., Streit, D. A. and EI-Gindy, M. (2001). "Heavy vehicle ride comfort : Literature survey." International Journal of Heavy Vehicle Systems, Vol.8 No.3., pp.258-284. https://doi.org/10.1504/IJHVS.2001.001163
  5. Nick, J. B., Janoff, M. S. (1983). "Evaluation of Panel Rating Methods for Assessing Pavement Ride Quality." Highway Research Record 946, pp.5-13.
  6. Torgerson, W. S. (1958). Theory and Methods of Scaling, John Wiley, New York.