DOI QR코드

DOI QR Code

Causes of uncertainty in thermoelasticity measurements of structural elements

  • 투고 : 2017.06.18
  • 심사 : 2017.09.03
  • 발행 : 2017.11.25

초록

Thermoelasticity is a contactless technique for measuring stress distributions in structural elements stressed by dynamic loads. This work describes the characteristics, analyzes the main causes of uncertainty and illustrates a series of operative methods for reducing its effects. More specifically, the effects of the angle of view between the thermographic camera and the surface of the object are studied, along with those due to the heat transmission by conduction between the various parts of the thing being measured as a function of the stress frequencies. The analyses, both theoretical and experimental, are aimed at defining the operational limits and optimal measurement and test conditions in relation to the measurement uncertainty that is considered tolerable in the specific application.

키워드

참고문헌

  1. Arefi, M. and Zenkour, A.M. (2017), "Nonlinear and linear thermo-elastic analyses of a functionally graded spherical shell using the Lagrange strain tensor", Smart Struct. Syst., 19(1), 33-38. https://doi.org/10.12989/sss.2017.19.1.033
  2. Barone, S. and Patterson, E.A. (1998), "An iterative, finite difference method for post-processing thermoelastic data using compatibility", J. Strain Anal. Eng. Des., 33(6), 437-447. https://doi.org/10.1243/0309324981513138
  3. Brouckaert, J.F., Marsili, R. and Rossi, G. (2012), "Development and experimental characterization of a new non contact sensor for blade tip timing", Proceedings of the 10th International Conference on Vibration Measurements by Laser and Noncontact Techniques - AIVELA, Ancona, Italy, June. Conference Proceedings Volume 1457, 61-68 DOI: 10.1063/1.4730543.
  4. Brustenga, G., Marsili, R., Moretti, M., Pirisinu, J. and Rossi, G. (2005), "Measurement on rotating mechanical component by thermoelasticity", J. Appl. Mech. Mater., August. ISBN 0-87849-987-3 ISSN 1660-9336. SCOPUS: 2-s2.0-33745170726
  5. Cardelli, E., Faba, A., Marsili, R., Rossi, G. and Tomassini, R. (2015), "Magnetic nondestructive testing of rotor blade tips", J, Appl, Phys,, 117, 17A705. doi: 10.1063/1.4907180.
  6. D'Aponte, F., D'Emilia, G., Lupinetti, S., Natale, E. and Pasqualoni, P. (2015), "Uncertainty of slip measurements in a cutting system of converting machinery for diapers production", Int. J. Metrol. Qual. Eng., 63(304), 1-6.
  7. D'Emilia, G., Di Rosso, G., Gaspari, A. and Massimo, A. (2015), "Metrological interpretation of a six sigma action for improving on line optical measurement of turbocharger dimensions in the automotive industry", Proceedings of the Institution of Mechanical Engineering: Part D, J. Automobile Eng., 229(2), 261-269, DOI: 10.1177/0954407014539671.
  8. D'Emilia, G., Razze, L. and Zappa, E. (2013), "Uncertainty evaluation of high frequency image-based vibration measurement", Measurement, 46(8), 2630-2637. https://doi.org/10.1016/j.measurement.2013.04.075
  9. D'Emilia, G., Lucci, S., Natale, E. and Pizzicannella, F. (2011), "Validation of a method for composition measurement of a non-standard liquid fuel for emission factor evaluation", Measurement, 44, 18-23. https://doi.org/10.1016/j.measurement.2010.08.016
  10. Ezzat, M.A. and El-Bary, A.A. (2016), "Modeling of fractional magneto-thermoelasticity for a perfect conducting materials", Smart Struct Syst., 18(4), 707-731. https://doi.org/10.12989/sss.2016.18.4.707
  11. Garg, M., Sharma, S., Sharma, S., Mehta, R. (2016), "Non-contact damage monitoring technique for FRP laminates using guided waves", Smart Struct Syst., 17(5), 795-817. https://doi.org/10.12989/sss.2016.17.5.795
  12. Garinei, A. and Marsili, R. (2014), "Development of a new capacitive matrix for a steering wheel's pressure distribution measurement", Int. J. Ind. Ergonomics, 44(1), 114-119 doi: 10.1016/j.ergon.2013.11.012.
  13. Garinei, A. and Marsili, R. (2014), "Thermoelastic stress analysis of the contact between a flat plate and a cylinder", Measurement: J. Int. Measurement Confederation, 52(1), 102-110. http://dx.doi.org/10.1016/j.measurement.2014.03.005.
  14. Garinei, A. and Marsili, R. (2013), "Design of an optical measurement system for dynamic testing of electrospindles", Measurement, 46(5), 1715-1721. DOI information: 10.1016/j.measurement.2013.01.006, ISSN: 0263-2241, Elsevier Science.
  15. Garinei, A. and Marsili, R. (2012), "A new diagnostic technique for ball screw actuators", Measurement, 45(5), 819-828, ISSN: 0263-2241 DOI: 10.1016/j.measurement.2012.02.23.
  16. Grigg, J.S., Dulieu-Barton, J.M. and Shenoi, R.A. (2000), "Validation of a complex composite construction using thermoelastic stress analysis", Proceedings of the SEM IX International Congress on Experimental Mechanics, Orlando, Florida, June.
  17. Harish G., Szolwinski M.P., Farris T.N. and Sakagami T. (2000), "Evaluation of fretting stress through full-field temperature measurement", ASTM STP 2000.
  18. Harwood, N. and Cummings, W.M. (1991), "Thermoelastic Stress Analysis", Adam Hilger.
  19. Ju, S.H., Lesniak, J.R. and Sandor, B.I. (1997), "Numerical simulation of stress intensity factors via the thermoelastic technique", Exper. Mech., 37(3), 278-284. https://doi.org/10.1007/BF02317419
  20. Kim, H., Kang, D. and Kim, D. (2017), "Mechanical strength of FBG sensor exposed to cyclic thermal load for structural health monitoring", Smart Struct Syst., 19(3), 335-340. https://doi.org/10.12989/sss.2017.19.3.335
  21. Lesniak, J.R. (1993), "Thermoelastic data improvements", Proceedings of the SEM Spring Conference on Experimental Mechanics, Dearborn, Michigan.
  22. Logozzo, S., Kilpela, A., Makynen, A. and Zanetti, E. (2014), "Recent advances in dental optics- part-II: Experimental tests for a new intraoral scanner", Opt. Laser Eng., 54, 187-196. https://doi.org/10.1016/j.optlaseng.2013.07.024
  23. Loktionov, A.P. (2016), "A measuring system for determination of a cantilever beam support moment", Smart Struct. Syst., 19(4), 431-439. DOI : 10.12989/sss.2017.19.4.431
  24. Offermann, S., Beaudoin, J.L., Bissieux, C. and Frick, H. (1997), "Thermoelastic stress analysis under non-adiabatic conditions", Exper. Mech., 37(4), 409-413. https://doi.org/10.1007/BF02317306
  25. Reifsnider, K.L. and Williams, R.S. (1974), "Determination of fatigue-related heat emission in composite materials", Exper. Mech., 479-485.
  26. Rocca, R. and Bever, M.B. (1950), "The thermoelastic effect in Iron and Nickel (As a Function of Temperature)", Trans. AIME, 188, 327-333.
  27. Rossi, G., Flori, R., Marsili, R. and Becchetti, M. (2009), "Stress and strain measurements by image correlation and thermoelasticity", Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics, Volume 1, 2009, Albuquerque, NM, United States, June. ISBN: 978-161567189-2; 978-161567189-2 SCOPUS: 2-s2.0-73349141710.
  28. Sakagami, T., Ogura, K. and Shoda, M. (1995), "Thermal sensing and imaging of the dry sliding contact surface", Orlando, Florida, SPIE.
  29. Speranzini, E., Marsili, R., Moretti, M. and Rossi, G.L. (2017), "Image analysis technique for material behavior evaluation in civil structures", Materials, 10, 770. doi:10.3390/ma10070770
  30. Speranzini, E., Agnetti, S. and Corradi, M. (2016), "Experimental analysis of adhesion phenomena in fibre-reinforced glass structures", Composites part B, 101, 155-166. DOI: 10.1016/j.compositesb.2016.06.074.
  31. Speranzini, E. and Agnetti S. (2014), "The technique of digital image correlation (DIC) to identify defects in glass structures", Struct Control Health Monit., 21(6), 2015-2029, DOI: 10.1002/stc.1629.
  32. Speranzini, E. and Agnetti, S. (2013), "Post-cracking behavior of reinforced glass beams", Proceedings of the COST Action TU0905, Mid-term Conference on Structural Glass. Porec, Croatia, April.
  33. Speranzini, E. and Agnetti, S. (2012), "Structural performance of natural fibers reinforced timber beams", Proceedings of the 6th International Conference on FRP Composites in Civil Engineering-CICE2012, Roma, Italy, June. Scopus: 2-s2.0-84924402118.
  34. Speranzini, E. and Tralascia, S. (2010), "Engineered lumber: LVL and solid wood reinforced with natural fibres", Proceedings of the WCTE-Word Conference on Timber Engineering, Trento, Italy, June. Scopus: 2-s2.0-84870414692.
  35. Szolwinski M.P., Harish G. and Farris T.N. (1999), "In-Situ measurement of near surface fretting contact temperatures in an aluminium alloy", J. Tribology, 121.
  36. UNI CEI ENV 13005 (2000), "Guide to the expression of uncertainty in measurement" July.
  37. Wong, A.K., Dunn, S.A. and Sparrow, J.G. (1988), "Residual stress measurement by means of the thermoelastic effect", Nature, 332(6165), 613-615. https://doi.org/10.1038/332613a0
  38. Zanetti, E.M. and Audenino, A.L. (2010), "Differential thermography for experimental, full-field stress analysis of hip arthroplasty", J. Mech. Medicine Biology, 10(3), 515-529. https://doi.org/10.1142/S0219519410003496
  39. Zhou, W., Li, H., Dong, Y. and Wang, A. (2016), "Sensing properties of optical fiber sensor to ultrasonic guided waves", Smart Struct. Syst., 18(3), 471-484. https://doi.org/10.12989/sss.2016.18.3.471