동력기계공학회지 (Journal of Power System Engineering)

  • 제21권5호
  • /
  • Pages.35-40
  • /
  • 2017
  • /
  • 2713-8429(pISSN)
  • /
  • 2713-8437(eISSN)
한국동력기계공학회 (The Korean Society for Power System Engineering)
권호 표지
DOI QR코드

DOI QR Code

확대 채널에서 리브 배열이 열전달에 미치는 효과

Effect of Rib Arrangement on Heat Transfer in the Divergent Channel

  • 이명성 (경남지역사업평가단) ;
  • 이경주 (경상대학교 해양산업 연구 소 기계시스템공학과) ;
  • 김상문 (경상대학교 해양산업 연구 소 기계시스템공학과) ;
  • 민세찬 (경상대학교 해양산업 연구 소 기계시스템공학과) ;
  • 배재문 (경상대학교 해양산업 연구 소 기계시스템공학과) ;
  • 황준수 (경상대학교 해양산업 연구 소 기계시스템공학과) ;
  • 박철오 (경상대학교 해양산업 연구 소 기계시스템공학과) ;
  • 김동찬 (경상대학교 해양산업 연구 소 기계시스템공학과) ;
  • 정정현 (경상대학교 해양산업 연구 소 기계시스템공학과) ;
  • 안수환 (경상대학교 해양산업 연구 소 기계시스템공학과)
  • Lee, Myung-Sung (Gyeongnam Institute for Regional Program Evaluation) ;
  • Lee, Gyeong-Ju (Department of Mechanical & System Engineering, Gyeongsang National University) ;
  • Kim, Sang-Moon (Department of Mechanical & System Engineering, Gyeongsang National University) ;
  • Min, Se-Chan (Department of Mechanical & System Engineering, Gyeongsang National University) ;
  • Bae, Jae-Moon (Department of Mechanical & System Engineering, Gyeongsang National University) ;
  • Hwang, Jun-Su (Department of Mechanical & System Engineering, Gyeongsang National University) ;
  • Park, Cheol-O (Department of Mechanical & System Engineering, Gyeongsang National University) ;
  • Kim, Dong-Chan (Department of Mechanical & System Engineering, Gyeongsang National University) ;
  • Jung, Jung-Hyeon (Department of Mechanical & System Engineering, Gyeongsang National University) ;
  • Ahn, Soo-Whan (Department of Mechanical & System Engineering, Gyeongsang National University)
  • 투고 : 2017.06.09
  • 심사 : 2017.08.28
  • 발행 : 2017.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The effects of the different rib geometries such as V-shaped continuous (case A), parallel broken (case B), and V-shaped broken (case C) ribs on the heat transfer and pressure drops in a divergent channel with $45^{\circ}$ inclined ribs on one wall or two walls are checked out. The top and bottom walls are adiabatic; two side walls are uniformly heated in the divergent rectangular channel. The tested Reynolds numbers are ranged from 22,000 to 75,000. The channel with two opposite walls inclined only has the length of test section of 1 m and the channel divergence ratio of $D_{ho}/D_{hi}=1.49$, corresponding to $1.43^{\circ}$ inclined walls. The results show in the identical pumping power that the V-shaped continuous rib (case A) with two ribbed walls is the greatest, but the parallel broken rib (case B) with one ribbed wall is the worst in the thermal performance.

키워드

참고문헌

  1. S. W. Ahn, H. K. Kang, S. T. Bae and D. H. Lee, 2008, "Heat transfer and friction factor in a square channel with one, two, or four inclined ribbed walls", ASME J. of Turbomachinery, Vol. 130, No. 3, pp. 034501-5. https://doi.org/10.1115/1.2775488
  2. J. C. Han, L. R. Glicksman, and W. M. Rohsenow, 1978, "An investigation of heat transfer and friction for rib-roughened surfaces", Int. J. of Heat and Mass Transfer, Vol. 21, pp. 1143-1156. https://doi.org/10.1016/0017-9310(78)90113-8
  3. M. E. Taslim and C. M. Wodsworth, 1977, "An experimental investigation of the rib surface - averaged heat transfer coefficient in a rib-roughened square passage", ASME J. of Turbomachinery, Vol. 119, pp. 381-389.
  4. M. S. Lee, S. S. Jeong, S. W. Ahn and J. C. Han, 2014, "Effects of angled ribs on turbulent heat transfer and friction factors in a rectangular divergent channel", Int. J. of Thermal Sciences, Vol. 84, pp. 1-8. https://doi.org/10.1016/j.ijthermalsci.2014.04.010
  5. M. S. Lee and S. W. Ahn, 2015, "Heat transfer in a two wall divergent rectangular channel with V-shaped ribs on one wall", J. of Korean Society for Power System Engineering, Vol. 19, pp. 32-37 (in Korean). https://doi.org/10.9726/kspse.2015.19.5.032
  6. S. J. Kline and F. A. McClintock, 1953, "Describing uncertainty in a single sample experiment", Mechanical Engineering, Vol. 75, pp. 3-5.
  7. F. W. Dittus and L. M. Boelter, 1930, "University of California (Berkeley) Publications in Engineering 2", Berkeley, pp. 443-461.
  8. F. P. Incorpera and D. P. Dewitt, 1996, "Fundamental of heat and mass transfer", 4th ed., John Willy and Sons, Inc., p. 424.
  9. M. E. Taslim and T. Li, 1994, "Experimental heat transfer and friction in channels roughened with angled, V-shaped and discrete ribs on two opposite walls", In ASME 1994 International Gas Turbine and Aeroengine Congress and Exposition, pp. V004T09A018.