DOI QR코드

DOI QR Code

Design of Repetitive Impact Tester and Mechanical Properties of Plastic Due to Cyclic Impacts

반복 충격장치 설계 및 반복충격에 의한 플라스틱 재료특성 연구

  • Lee, Joon-Hyun (school of Mechanical Engineering, Pusan National University) ;
  • Lee, Sang-Pill (Department of Mechanical Engineering, Dongeui University) ;
  • Lee, Jin-Kyung (Department of Mechanical Engineering, Dongeui University)
  • Received : 2017.05.15
  • Accepted : 2017.10.17
  • Published : 2017.10.31

Abstract

Many household appliances, including vacuum cleaners, are being subjected to various of impact damages, and made of plastic. However, researches on the damage of appliances materials by repetitive impacts have been rarely conducted. the mechanical stress exerted upon impact-modified polycarbonate (PC) has a great influence not only on the quality of the product but also on the life span. The purpose of this research was to quantify the effects of repetitive impact on the polycarbonate. Second, it was to design the repetitive impact tester for controlling the impact energy. The mechanical properties of tensile strength, yielding stress and strain on the specimens subjected to cyclic impacts were discussed. Tensile strength was sharply declined at the beginning of the impact cycles, while the strain gradually decreased during impact cycles.

Keywords

References

  1. A. S. Mohammed and M. I. Fareed, 2016 "Improving the Friction and Wear of Poly-Ether-Etherketone (PEEK) by Using Thin Nano-Composite Coatings", Wear, Vol. 364-365, pp. 154-162. https://doi.org/10.1016/j.wear.2016.07.012
  2. H. J. Kang, T. G. Kim, D. H. Moon, 2014 "Vibration Transfer Characteristic of Seat with the Auxiliary Plastic Member for Movie Theater Chair", Journal of KSPSE, Vol. 18, No. 6, pp. 45-50.
  3. J. G. Kim. J. Y. Kim, H. S. Kim, 2009 "Design for Improving Impact Resistance of Microwave Oven Using Drop/Impact Analysis", Journal of KSPSE, Vol. 13, No. 3, pp. 53-58.
  4. L. Yang, X. Liu, Z. Wu, R. Wang, 2016, "Effects of Triangle-Shape Fiber on the Transverse Mechanical Properties of Unidirectional Carbon Fiber Reinforced Plastics", Composite Structures, Vol. 152, pp. 617-625. https://doi.org/10.1016/j.compstruct.2016.05.065
  5. C. Y. Moon, J. S. Park, Y. D. Jeong, 2003 "Spring Back on the Compound Bending of the Plastic Fuel Tube for Automobile", Journal of KSPSE, Vol. 7, No. 2, pp. 51-55.
  6. D. E. Krzeminski, B, M. D. Fernando, G. Curtzwiler, T. E. Gould, S. G. Piland, J. W. Rawlins, 2016 "Repetitive Impact Exposure and Characterization of Stress-Whitening of an American Football Helmet Outer Shell Material", Polymer Testing, Vol. 55, pp. 190-203. https://doi.org/10.1016/j.polymertesting.2016.08.019
  7. E. S. Zanoria, L. E. Seitzman, 2004 "Characterization of Thin Metallurgical Coating Systems by Repetitive Inclined Impact Test in Dry Condition", Surface and Coating technology, Vol. 182, pp. 161-170. https://doi.org/10.1016/S0257-8972(03)00869-7
  8. E. Frutos, J. L. Gonzalez-Carrasco, T. Polcar, 2016 "Repetitive Nano-Impact Tests as a New Tool to Measure Fracture Toughness in Brittle Materials", Journal of the European Ceramic Society, Vol. 36, pp. 3235-3242. https://doi.org/10.1016/j.jeurceramsoc.2016.04.026

Cited by

  1. PC와 ABS 플라스틱재료의 반복적인 충격하중에 의한 기계적 특성 평가 vol.23, pp.3, 2017, https://doi.org/10.21289/ksic.2020.23.3.375
  2. 반복적인 충격하중을 받은 PC 플라스틱 재료의 변형 및 수명 평가 vol.23, pp.4, 2017, https://doi.org/10.21289/ksic.2020.23.4.611