References
- Han, S. R., "The Relation Between Injection Molding Conditions and Gloss of ABS Molding," Journal of the Korea Academia-Industrial Cooperation Society, Vol. 14, No. 11, pp. 5352-5356, 2013. https://doi.org/10.5762/KAIS.2013.14.11.5352
- Potsch, G. and Michaeli, W., "Injection Molding an Introduction," Hanser Publishers, pp. 1-3, 1995.
- Kim, K. H. and Choi, J. Y., "Design of Injection Molding Process Factors Blower Fan using the Taguchi Method," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 3, pp. 92-97, 2012.
- Lee, H. J., "A Study of Thermal Deformation Behavior of Injection Molded Parts by Using Real-Time Measurement System," Proc. of the KSPE Autumn Conference, pp. OP079-80, 2016.
- Cha, K. J. and Lee, H. B., "Flow Analysis of Super Engineering Plastic Plunger in Automobile ABS," Proc. of the KSMPE Autumn Conference, pp. 156, 2015.
- Han, S. R., "Effect of Flow Pattern of Coolant for Injection Mold on the Deformation of Injection Molding," J. of KSMPE, Vol. 14, No. 4, pp. 92-99, 2015.
- Kim, J. H., Yi, D. E., Jang, J. H. and Lee, S. L., "Deformation Analysis Considering Thermal Expansion of Injection Mold," Transactions of the Korean Society of Mechanical Engineers A , Vol. 39, No. 9, pp. 893-899, 2015. https://doi.org/10.3795/KSME-A.2015.39.9.893
- Kwak, J. S. and Ha, M. K., "Optimization of Grinding Conditions and Prediction of Surface Roughness Using Taguchi Experimental Design," JOURNAL-KOREAN SOCIETY OF PRECISION ENGINEERING, Vol. 21, No. 7, pp. 37-45, 2004.
- Kim, C. and Ha, T. J., "Optimization of an Automotive Disc Brake Cross-section with Least Thermal Deformation by Taguchi Method," Transactions of the Korean Society of Automotive Engineers, Vol. 24, No. 1, pp. 1-9, 2016. https://doi.org/10.7467/KSAE.2016.24.1.001
- Han, S. R., "Improvement of Insert Molding for Refrigerator Glass Shelves Using Numerical Analysis," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 6, pp. 50-57, 2016. https://doi.org/10.14775/ksmpe.2016.15.6.050
Cited by
- Numerical Analysis of Cooling Channels for Injection Molding Cycle Time Improvement of Plastic Horn Cover for an Automobile vol.17, pp.5, 2018, https://doi.org/10.14775/ksmpe.2018.17.5.084
- Development of a Process Technique for Heavy Metal Removal in the Production of Recycled Synthetic Resin Materials vol.17, pp.4, 2018, https://doi.org/10.14775/ksmpe.2018.17.4.137
- Fatigue Test of 3D-printed ABS Parts Fabricated by Fused Deposition Modeling vol.17, pp.3, 2018, https://doi.org/10.14775/ksmpe.2018.17.3.093
- 6시그마를 이용한 자동차 범퍼의 치수 최적화에 대한 연구 vol.16, pp.6, 2017, https://doi.org/10.14775/ksmpe.2017.16.6.109