참고문헌
- Lee, M. K., Kim, T. S., and Lee, W. C., "Study on Parallel-Typed Robot and Machining Tool," Journal of the Korean Society of Precision Engineering, Vol. 18, No. 7, pp. 9-18, 2001.
- Shin, H., Ryou, H. S., and Jung, Y. G., "The Evaluation of Machining Accuracy and the Machine Simulation for Parallel Kinematic Machine Tool(PKMT)," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 4, pp. 41-47, 2009.
- Kim, J. S, and Kim, Y. J., "Cutting Performance of a Developed Small-angle Spindle Tool," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 2, pp. 111-117, 2016. https://doi.org/10.14775/ksmpe.2016.15.2.111
- Kim, H. J., Lee, I. S., and Kim, N. K., "Interference Check and NC Data Optimization through Machine Simulation in 5 Axis Machining of a Vehicle Parts of Aluminum Alloy," Journal of the Korean Society for Precision Engineering, Vol. 21, No. 12, pp. 52-59, 2004.
- Kim, H. J., Jang, J. H., and Kim, N. K., "A Study on Interference Phenomenon of a Machine Tool When 5 Axis Working with Virtual Machine Tool," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 4, No. 2, pp. 16-23, 2005.
- Son, H. J., Cho, Y. T. and Jung, Y. G., "The Development of Module for 5-axis Drilling of a Closed Type Impeller," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 1, pp. 1-7, 2014. https://doi.org/10.14775/ksmpe.2014.13.1.001
- Son, H. J., Lim, E. S. and Jung, Y. G., "The Improvement of Surface Roughness of Marine Propeller by Continuous Control of Cutter Posture in 5-Axis Machining,"Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 2, pp. 27-33, 2012.
- Jung, H. C., Hwang, J. D. and Jung, Y. G., "Development of CAM Automation Module(E-ICAM) for 5-axis Machining of Impeller : A Study on Configuration of Module,"Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 4, pp. 109-114, 2011.
- Suk, H. S., Seo, Y. H., Lee, S. M., Chung, G. S., and Kim, D. Y., "Modeling and implementation of internet-based virtual machine tools," The International Journal of Advanced Manufacturing Technology, Vol. 20, pp. 1-7, 2003.
- Hwang, J. D., Kim, J. H., Cho, Y. T., Jung, Y. G., and Ko, H. J., "Development of the Optimized Angle Head for Internal Shape Machining Using Five-Axis Machine Tool," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 1, pp. 123-129, 2015. https://doi.org/10.14775/ksmpe.2015.14.1.123
- Lee, I. S., and Kim, H. J., "A Study of High Speed Machining Distortion Characteristics of Aluminum Lithium Alloys Wing Rib," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 6, pp. 111-118, 2014. https://doi.org/10.14775/ksmpe.2014.13.6.111