참고문헌
- KGS AC411-2015: Facility/Technical/Inspection Code for Manufacture of Storage Tanks and Pressure Vessels for High-pressure Gases.
- Cho, S. M., Kim, K. S., Kim, C. J., Lyu G. J., Lee Y. J., Jo Y. S., Lyu S. K., "Temperature Variations of Air Pocket in Type-3 Composite Vessel during Ambient Hydraulic Cycling Test", J. Korean Soc. Manuf. Process Eng., Vol. 14, No. 5, pp. 120-125, 2015. https://doi.org/10.14775/ksmpe.2015.14.5.120
- Choi, K. S., Park, J. H., Park, J. H., "A Structural Analysis by Finite Element Method under the Dropping Condition of Standardized IP-2 Metal Container for Decommissioning Radwaste Transportation", J. Korean Soc. Manuf. Process Eng., Vol. 14, No. 6, pp. 35-40, 2015. https://doi.org/10.14775/ksmpe.2015.14.6.035
- Jang, J. H., Ha, C. K., Chu, B. S. Park, J. Y., "Development of Fault Diagnosis Technology Based on Spectrum Analysis of Acceleration Signal for Paper Cup Forming Machine", J. Korean Soc. Manuf. Process Eng., Vol. 15, No. 6, pp. 1-8, 2016. https://doi.org/10.14775/ksmpe.2016.15.6.001
- Lee, H. R., Ahn, J. H., Shin, J. H., Kim, H. Y., "Design of a Cylinder Valve Solenoid for a CNG Vehicle using Electromagnetic Field Analysis", J. Korean Soc. Manuf. Process Eng., Vol. 15, No. 2, pp. 89-96, 2016. https://doi.org/10.14775/ksmpe.2016.15.2.089
- DOT CFFC 2007: Basic Requirement for fully Wrapped Carbon-Fiber Reinforced Aluminum Lined Cylinders
- ASTM E8-01, Standard Test Methods for Tension Testing of Metallic Materials, p. 14.
- Rosata, D. V. and Grove, C. S. Filament winding : Its Development, Manufacture, Application and Design, Interscience Publishers, 1984.
- Sun, X. K., Du, S. Y. and Wang, G. D., Bursting Problem of Filament Wound Composite Pressure Vessels, International Journal of Pressure Vessels and Piping, Vol. 76, pp. 55-59, 1999. https://doi.org/10.1016/S0308-0161(98)00096-9
- Engineering Materials Handbook-Composites, ASME International, pp. 503-518, 1987
- Krolewski, S., Economic comparison of Advanced Composite Fabrication Technology, 34th International SAMPE Symposium, May 1989.
- Kwang, T. K., Jung, S. K., Doh, Y. D., Cho, W. M. and Jung, B., The Performance Improvement of Filament Wound Composite Pressure Vessels, International SAMPE Symposium, pp. 1427-1438, 2000.
- Loisse, M., Production Oriented Design of Filament Wound Composites, K. U. Leuven, PhD Thesis, April, 1990.
피인용 문헌
- Development of Subminiature Type 3 Composite Pressure Vessel for Cooling Unit in Electric Appliances vol.17, pp.6, 2017, https://doi.org/10.14775/ksmpe.2018.17.6.151
- 100L-700MPa급 초고압 용기 설계 기술 개발 vol.18, pp.8, 2017, https://doi.org/10.14775/ksmpe.2019.18.8.067