References
- I. Gibson, D. Rosen, and B. Stucker, Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping and Direct Digital Manufacturing. New York, NY: Springer, 2015.
- B. C. Gross, J. L. Erkal, S. Y. Lockwood, C. Chen, and D. M. Spence, "Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences," Analytical Chemistry, vol. 86, no. 7, pp. 3240-3253, 2014. https://doi.org/10.1021/ac403397r
- J. Lee, J. Bang, and J. Choi, "Realistic head phantom for evaluation of brain stroke localization methods using 3D printer," Journal of Electromagnetic Engineering and Science, vol. 16, no. 4, pp. 254-258, 2016. https://doi.org/10.5515/JKIEES.2016.16.4.254
- J. C. S. Chieh, B. Dick, S. Loui, and J. D. Rockway, "Development of a Ku-band corrugated conical horn using 3-D print technology," IEEE Antennas and Wireless Propagation Letters, vol. 13, pp. 201-204, 2014. https://doi.org/10.1109/LAWP.2014.2301169
- G. L. Huang, T. H. Chio, T. S. Yeo, and S. G. Zhou, "Application of 3-D metal-direct-printing technique for waveguide antenna fabrication," in Proceedings of 2015 IEEE International Symposium on Antenna and Propagation (APSURSI), Vancouver, Canada, 2015, pp. 316-317.
- M. Liang, W. R. Ng, K. Chang, K. Gbele, M. E. Gehm, and H. Xin, "A 3-D Luneburg lens antenna fabricated by polymer jetting rapid prototyping," IEEE Transaction on Antennas and Propagation, vol. 62, no. 4, pp. 1799-1807, 2014. https://doi.org/10.1109/TAP.2013.2297165
- P. Nayeri, M. Liang, R. A. Sabory-Garcia, M. Tuo, F. Yang, M. Gehm, H. Xin, and A. Z. Elsherbeni, "3D printed dielectric reflectarrays: low-cost high-gain antennas at sub-millimeter waves," IEEE Transaction on Antennas and Propagation, vol. 62, no. 4, pp. 2000-2008, 2014. https://doi.org/10.1109/TAP.2014.2303195
- S. Moscato, R. Bahr, T. Le, M. Pasian, M. Bozzi, L. Perregrini, and M. M. Tentzeris, "Infill-dependent 3-Dprinted material based on NinjaFlex filament for antenna applications," IEEE Antennas and Wireless Propagation Letters, vol. 15, pp. 1506-1509, 2016. https://doi.org/10.1109/LAWP.2016.2516101
- H. Huang, K. Nieman, P. Y. Chen, M. Ferrari, Y. Hu, and D. Akinwande "Properties and applications of electrically small folded ellipsoidal helix antenna," IEEE Antennas and Wireless Propagation Letters, vol. 11, pp. 678-681, 2012. https://doi.org/10.1109/LAWP.2012.2203576
- O. S. Kim, "Rapid prototyping of electrically small spherical wire antennas," IEEE Transaction on Antennas and Propagation, vol. 62, no. 7, pp. 3839-3842, 2014. https://doi.org/10.1109/TAP.2014.2317489
- M. Kong, G. Shin, S. H. Lee, and I. J. Yoon, "Electrically small folded spherical helix antennas using copper strips and 3D printing technology," IET Electronics Letters, vol. 52, no. 12, pp. 994-996, 2016. https://doi.org/10.1049/el.2016.0982
- J. J. Adams, E. B. Duoss, T. F. Malkowski, M. J. Motala, B. Y. Ahn, R. G. Nuzzo, J. T. Bernhard, and J. A. Lewis, "Conformal printing of electrically small antennas on three-dimensional surfaces," Advanced Materials, vol. 23, no. 11, pp. 1335-1340, 2011. https://doi.org/10.1002/adma.201003734
- M. Kong, G. Shin, S. Lee, and I. J. Yoon, "An electrically small, 3D printed folded spherical meander antenna," in Proceedings of 2017 IEEE International Symposium on Asia-Pacific Electromagnetic Compatibility (APEMC), Seoul, Korea, 2017, pp. 102-104.
- H. L. Thal, "New radiation Q limit for spherical wire antennas," IEEE Transaction on Antennas and Propagation, vol. 54, no. 10, pp. 2757-2763, 2006. https://doi.org/10.1109/TAP.2006.882184
- Electrolube, "Silver Conductive Paint (SCP) technical data sheet," 2013; https://www.electrolube.com/core/components/products/tds/044/SCP.pdf.
- C. A. Balanis, Antenna Theory: Analysis and Design, 3rd ed. New York, NY: Wiley, 2005.
Cited by
- Gain Characteristic Maintained, Miniaturized LPDA Antenna Using Partially Applied Folded Planar Helix Dipoles vol.6, pp.None, 2018, https://doi.org/10.1109/access.2018.2834931
- Miniaturized Metamaterial Absorber Using Three-Dimensional Printed Stair-Like Jerusalem Cross vol.6, pp.None, 2017, https://doi.org/10.1109/access.2018.2862160
- Simultaneous Detection of Two Chemicals Using a TE 20 -Mode Substrate-Integrated Waveguide Resonator vol.18, pp.3, 2017, https://doi.org/10.3390/s18030811
- Robust Design of 3D-Printed 6-18 GHz Double-Ridged TEM Horn Antenna vol.8, pp.9, 2017, https://doi.org/10.3390/app8091582
- 판형 유전체의 유전율 측정 방법 vol.29, pp.10, 2018, https://doi.org/10.5515/kjkiees.2018.29.10.799
- Ultra Wideband Spherical Self-Complementary Antenna with Capacitive and Inductive Loadings vol.14, pp.2, 2017, https://doi.org/10.1007/s42835-018-00053-1
- Assembly and applications of 3D conformal electronics on curvilinear surfaces vol.6, pp.4, 2017, https://doi.org/10.1039/c8mh01450g
- Near-Field Immunity Test Method for Fast Radiated Immunity Test Debugging of Automotive Electronics vol.8, pp.7, 2017, https://doi.org/10.3390/electronics8070797
- Inkjet printed kirigami inspired split ring resonator for disposable, low cost strain sensor applications vol.29, pp.1, 2017, https://doi.org/10.1088/1361-665x/ab548b
- Investigation on Insulated, Brain-Implanted Antenna for Highly Reliable Biotelemetry Communication in MICS and ISM Bands vol.20, pp.1, 2017, https://doi.org/10.3390/s20010242