DOI QR코드

DOI QR Code

Improved block-wise MET for estimating vibration fields from the sensor

  • Jung, Byung Kyoo (School of Mechanical Engineering, Pusan National University) ;
  • Jeong, Weui Bong (School of Mechanical Engineering, Pusan National University) ;
  • Cho, Jinrae (Department of Naval Architecture and Ocean Engineering, Hongik University)
  • 투고 : 2017.01.31
  • 심사 : 2017.07.10
  • 발행 : 2017.11.10

초록

Modal expansion technique (MET) is a method to estimate the vibration fields of flexible structures by using eigenmodes of the structure and the signals of sensors. It is the useful method to estimate the vibration fields but has the truncation error since it only uses the limit number of the eigenmodes in the frequency of interest. Even though block-wise MET performed frequency block by block with different valid eigenmodes was developed, it still has the truncation error due to the absence of other eigenmodes. Thus, this paper suggested an improved block-wise modal expansion technique. The technique recovers the truncation errors in one frequency block by utilizing other eigenmodes existed in the other frequency blocks. It was applied for estimating the vibration fields of a cylindrical shell. The estimated results were compared to the vibration fields of the forced vibration analysis by using two indices: the root mean square error and parallelism between two vectors. These indices showed that the estimated vibration fields of the improved block-wise MET more accurately than those of the established METs. Especially, this method was outstanding for frequencies near the natural frequency of the highest eigenmode of each block. In other words, the suggested technique can estimate vibration fields more accurately by recovering the truncation errors of the established METs.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea (NRF)

참고문헌

  1. Au, F.T.K., Lou, P., Li, J. and Jiang, R.J. (2011), "Simulation of vibrations of Ting Kau Bridge due to vehicular loading from measurements", Struct. Eng. Mech., 40(4), 471-488. https://doi.org/10.12989/sem.2011.40.4.471
  2. Avitabile, P. and Pingle, P. (2012), "Prediction of full field dynamic strain from limited sets of measured data", Shock Vib, 19, 765-785. https://doi.org/10.1155/2012/408919
  3. Chen, W.L. and Xu, F. (2012), "Investigation of a hybrid approach combining experimental tests and numerical simulations to study vortex-induced vibration in a circular cylinder", J. Sound Vib., 331, 1164-1182. https://doi.org/10.1016/j.jsv.2011.10.016
  4. Goncalves, P.B., Jurjo, D.B.R., Magluta, C. and Roitman, N. (2013) "Experimental investigation of the large amplitude vibrations of a thin-walled column under self-weight", Struct. Eng. Mech., 46(6), 869-886. https://doi.org/10.12989/sem.2013.46.6.869
  5. Hadianfard, M.A., Rabiee, R. and Sarshad, A. (2015), "Case study on the effects of retrofitting on changing structural dynamic characteristics by microtremor measurements and finite element analysis", Struct. Eng. Mech., 55(5), 965-977. https://doi.org/10.12989/sem.2015.55.5.965
  6. Hosoya, N., Kajiwara I. and Hosokawa T. (2012), "Vibration testing based on impulse response excited by pulsed-laser ablation: Measurement of frequency response function with detection-free input", J. Sound Vib., 331(6), 1355-1365. https://doi.org/10.1016/j.jsv.2011.10.034
  7. Iliopoulos, A., Shirzadeh, R. and Weijtjens, W. (2016), "A modal decomposition and expansion approach for prediction of dynamic responses on a monopole offshore wind turbine using a limited number of vibration sensors", Mech. Syst. Signal Pr., 68, 84-104.
  8. Jung, B.K. and Jeong, W.B. (2011), "Estimation of vibration source and sound radiation of a refrigerator fan by using measured acceleration signals", Tran. Korean Soc. Noise Vib. Eng., 21(9), 834-841. https://doi.org/10.5050/KSNVE.2011.21.9.834
  9. Jung, B.K. and Jeong, W.B. (2015), "Mode selection of modal expansion method estimating vibration field of washing machine", J. Sound Vib., 340, 343-353. https://doi.org/10.1016/j.jsv.2014.12.016
  10. Jung, B.K., Cho, J.R. and Jeong, W.B. (2015), "Sensor placement optimization for structural modal identification of flexible structures using genetic algorithm", J. Mech. Sci. Technol., 29(7), 2775-2783. https://doi.org/10.1007/s12206-015-0606-z
  11. Jung, B.K., Cho, J.R. and Jeong, W.B. (2016), "Reproduction of vibration patterns of elastic structures by block-wise modal expansion method(BMEM)", Smart Struct. Syst., 18(4), 819-838. https://doi.org/10.12989/sss.2016.18.4.819
  12. Jung, B.K., Jeong, W.B. and Cho, D.S. (2014), "Estimation of vibration field of a cylindrical structure derived by optimal sensor placement methods", Tran. Korean Soc. Noise Vib. Eng., 24(5), 381-389. https://doi.org/10.5050/KSNVE.2014.24.5.381
  13. Lee, S.H. and Jeong, W.B. (2012), "An efficient method to predict steady-state vibration of three-dimensional piping system conveying a pulsating fluid", J. Mech. Sci. Technol., 26(9), 2659-2667. https://doi.org/10.1007/s12206-012-0719-6
  14. Sun, R., Chen, G., He, H. and Zhang, B. (2014), "The impact force identification of composite stiffened panels under material uncertainty", Finite Elem. Anal. Des., 81, 38-47. https://doi.org/10.1016/j.finel.2013.11.008
  15. Wan, Z., Li, S., Huang, Q. and Wang, T. (2014), "Structural response reconstruction based on the modal superposition method in the presence of closely spaced modes", Mech. Syst. Signal Pr., 42, 14-30. https://doi.org/10.1016/j.ymssp.2013.07.007
  16. Yi, T.H., Li, H.N. and Gu, M. (2011), "A new method for optimal selection of sensor location on a high-rise building using simplified finite element model", Struct. Eng. Mech., 37(6), 671-684. https://doi.org/10.12989/sem.2011.37.6.671
  17. Yi, T.H., Zhou, G.D., Li, H.N. and Zhang, X.D. (2015), "Optimal sensor placement for health monitoring of high-rise structure based on collaborative-climb monkey algorithm", Struct. Eng. Mech., 54(2), 305-317. https://doi.org/10.12989/sem.2015.54.2.305