대한치과보철학회지 (The Journal of Korean Academy of Prosthodontics)

  • 제55권4호
  • /
  • Pages.410-418
  • /
  • 2017
  • /
  • 0301-2875(pISSN)
  • /
  • 2005-3789(eISSN)
대한치과보철학회 (The Korean Academy of Prosthodonitics)
권호 표지
DOI QR코드

DOI QR Code

전치부 개방교합을 보이는 법랑질형성부전증 환자의 CAD/CAM system을 이용한 전악 수복 증례

Full-mouth rehabilitation in an amelogenesis imperfecta patient with anterior open bite using CAD/CAM system

  • 이상훈 (분당서울대학교병원 치과보철과) ;
  • 이양진 (분당서울대학교병원 치과보철과) ;
  • 조득원 (분당서울대학교병원 치과보철과)
  • Lee, Sang-Hoon (Department of Prosthodontics, Section of Dentistry, Seoul National University Bundang Hospital) ;
  • Yi, Yang-Jin (Department of Prosthodontics, Section of Dentistry, Seoul National University Bundang Hospital) ;
  • Jo, Deuk-Won (Department of Prosthodontics, Section of Dentistry, Seoul National University Bundang Hospital)
  • 투고 : 2017.05.22
  • 심사 : 2017.08.01
  • 발행 : 2017.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

법랑질 형성 부전증은 유전적인 결함으로 인해 구조적으로 약한 법랑질이 형성되는 질환이다. 이들 환자들은 이른 나이부터 진행되는 법랑질 마모에 의한 시린 증상과 비심미적인 치아를 주소로 치과에 내원하게 되며, 성장기 이후에는 전악 보철 수복을 통해 치아의 기능성과 심미성을 회복해 주게 된다. 법랑질 형성 부전증 환자에서 보여지는 전치부 개방 교합은, 구치의 교합면 마모 및 보상성 맹출에 의한 수직적 수복 공간 문제와 결부되어 보철 치료를 어렵게 하는 요인이 된다. 따라서 전치 길이의 결정 및 교합 고경의 거상 여부, 전방유도의 설정은 신중히 결정되어야 한다. 근래에는 Computer aided design-computer aided manufacturing (CAD/CAM) 기술을 이용하여 진단 및 최종 수복으로의 이행이 용이해 졌다. 본 증례에서는 전치부 개방교합을 가지고 있는 법랑질 형성 부전증 환자에서, CAD/CAM을 이용한 전악 수복을 시행한 후, 양호한 경과를 보이고 있기에 이를 보고하고자 한다.

Amelogenesis imperfecta characterized as abnormally formed enamel is caused by a defect of unique group of genes. Patients affected by this disease might have difficulties in social and psychological aspects due to non-esthetic teeth as well as functional problems caused by enamel detachment and tooth wear from their early ages. Adult patients with amelogenesis imperfecta can be treated with full-mouth restorations, which make functional and esthetic rehabilitations of severely worn tooth. However, the anterior open bite and lack of occlusal clearance for posterior teeth restorations due to compensatory extrusion are the intervening factors in the prosthetic treatment. Therefore, the determination of anterior tooth lengths, vertical dimension, and anterior guidance should be set carefully. Recently, computer-aided design and computer-aided manufacturing (CAD/CAM) techniques help systematic approaches and enable dentists to reduce time-consuming procedures in the diagnosis and treatment of full-mouth rehabilitation. This case report demonstrates the successful full mouth rehabilitation using a CAD/CAM system in a young adult patient with amelogenesis imperfecta and anterior open bite.

키워드

참고문헌

  1. DeSort KD. Amelogenesis imperfecta: The genetics, classification, and treatment. J Prosthet Dent 1983;49:786-92. https://doi.org/10.1016/0022-3913(83)90349-9
  2. Ayers KM, Drummond BK, Harding WJ, Salis SG, Liston PN. Amelogenesis imperfecta-multidisciplinary management from eruption to adulthood. Review and case report. N Z Dent J 2004;100:101-4.
  3. Rajesh P, Prasad M, Haldal S. Full mouth rehabilitation of a patient with amelogenesis imperfecta: a case report. J Int Oral Health 2014;6:76-9.
  4. Witkop CJ, Sauk JJ. Heritable defects of enamel. In: Stewart RE, Prescott GH, editors. Oral facial genetics. St. Louis; C.V. Mosby; 1976. p. 151-226.
  5. Rowley R, Hill FJ, Winter GB. An investigation of the association between anterior open-bite and amelogenesis imperfecta. Am J Orthod 1982;81:229-35. https://doi.org/10.1016/0002-9416(82)90055-0
  6. Hoppenreijs TJ, Voorsmit RA, Freihofer HP, van't Hof MA. Open bite deformity in amelogenesis imperfecta. Part 2: Le Fort I osteotomies and treatment results. J Craniomaxillofac Surg 1998;26:286-93. https://doi.org/10.1016/S1010-5182(98)80056-5
  7. Kostoulas I, Kourtis S, Andritsakis D, Doukoudakis A. Functional and esthetic rehabilitation in amelogenesis imperfecta with allceramic restorations: a case report. Quintessence Int 2005;36:329-38.
  8. Yip HK, Smales RJ. Oral rehabilitation of young adults with amelogenesis imperfecta. Int J Prosthodont 2003;16:345-9.
  9. Binkley TK, Binkley CJ. A practical approach to full mouth rehabilitation. J Prosthet Dent 1987;57:261-6. https://doi.org/10.1016/0022-3913(87)90293-9
  10. Kordass B, Ruge S, Ratzmann A, Hugger A. Current technologies for functional diagnostics and CAD/CAM. Int J Comput Dent 2013;16:163-71.
  11. Reich S. Tooth-colored CAD/CAM monolithic restorations. Int J Comput Dent 2015;18:131-46.
  12. Neville BW, Damm DD, Allen CM, Bouquot JE. Oral and maxillofacial pathology. 2nd ed. Philadelphia: WB Sanders Co.; 2002. p. 96.
  13. Sciasci P, Abi-Rached FO, Adabo GL, Baldissara P, Fonseca RG. Effect of surface treatments on the shear bond strength of luting cements to Y-TZP ceramic. J Prosthet Dent 2015;113:212-9. https://doi.org/10.1016/j.prosdent.2014.09.012
  14. Ozcan M. Evaluation of alternative intra-oral repair techniques for fractured ceramic-fused-to-metal restorations. J Oral Rehabil 2003;30:194-203. https://doi.org/10.1046/j.1365-2842.2003.01037.x
  15. Al-Amleh B, Lyons K, Swain M. Clinical trials in zirconia: a systematic review. J Oral Rehabil 2010;37:641-52.
  16. Palacios RP, Johnson GH, Phillips KM, Raigrodski AJ. Retention of zirconium oxide ceramic crowns with three types of cement. J Prosthet Dent 2006;96:104-14. https://doi.org/10.1016/j.prosdent.2006.06.001
  17. Thompson JY, Stoner BR, Piascik JR, Smith R. Adhesion/cementation to zirconia and other non-silicate ceramics: where are we now? Dent Mater 2011;27:71-82. https://doi.org/10.1016/j.dental.2010.10.022
  18. Melo RM, Souza RO, Dursun E, Monteiro EB, Valandro LF, Bottino MA. Surface treatments of zirconia to enhance bonding durability. Oper Dent 2015;40:636-43. https://doi.org/10.2341/14-144-L
  19. Ozcan M, Cura C, Valandro LF. Early bond strength of two resin cements to Y-TZP ceramic using MPS or MPS/4-META silanes. Odontology 2011;99:62-7. https://doi.org/10.1007/s10266-010-0144-1
  20. Ozcan M, Kerkdijk S, Valandro LF. Comparison of resin cement adhesion to Y-TZP ceramic following manufacturers' instructions of the cements only. Clin Oral Investig 2008;12:279-82. https://doi.org/10.1007/s00784-007-0151-y

피인용 문헌

  1. 적절한 전방 유도 재현을 위해 수정된 Dahl 원리 및 CAD/CAM 복제 기법을 이용하여 전치부의 기능 및 심미성을 개선한 보철 수복 증례 vol.57, pp.2, 2017, https://doi.org/10.4047/jkap.2019.57.2.160
  2. 복합레진으로 제작한 인레이 보철물 구조에 따른 교합면 부위의 2차원 변연 적합도 및 내면 부위의 3차원 정확성 분석 vol.41, pp.1, 2017, https://doi.org/10.14347/kadt.2019.41.1.21