참고문헌
- J. D. Kim, E. J. Lee, and C. G. Kim, "Study on Laser Cladding of Heat Resisting Steel Using EuTroLoy 16006 Powder( II) - Characteristics of Alloying Elements Distribution of Multi Pass Clad Layer -", Trans. Korean Soc. Mech. Eng. A., 41(4), 307 (2017).
- H. J. Bae, J.-S. Ha, and S. H. Park, "The activation Energy of the Niobium donor in n-type TiO2 film grown by Pulsed Laser Deposition", J. Microelectron. Packag. Soc., 21(4), 41 (2014). https://doi.org/10.6117/KMEPS.2014.21.4.041
- J. D. Kim, E. J. Lee, and J. G. Hwang, "Comparison of clad layer characteristics with overlapping criterion in multi pass laser cladding", Journal of the Korean Society of Marine Engineering, 40(9), 768 (2016). https://doi.org/10.5916/jkosme.2016.40.9.768
- J. G. Kim, D. Y. Kim, H. Kim, B. D. Hahn, and Y. R. Cho, "Effect of Interface on Thermal Conductivity of Clad Metal through Thickness Direction for Heat Sink", J. Microelectron. Packag. Soc., 22(3), 67 (2015). https://doi.org/10.6117/kmeps.2015.22.3.067
- G. Bi, B. Schurmann, A. Gasser, K. Wissenbach, and R. Poprawe, "Development and qualification of a novel lasercladding head with integrated sensors", Int. J. Machine Tools & Manufacture 47, 555 (2007). https://doi.org/10.1016/j.ijmachtools.2006.05.010
- B. J. Choi, M. G. Lee, M. S. Hong, B. M. Ahn, D. H. Jung, K. J. Lee, C. G. Lee, and Y. H. Jeon, "Feasibility Study of Laser Cladding for Co-based Coating on SCM440 and GC250", J. Korean Soc. Manuf. Technol. Eng., 26(3), 337 (2017). https://doi.org/10.7735/ksmte.2017.26.3.337
- H. K. Lee, "Analysis and Optimization of the Cladding Parameters for Improving Deposition Efficiency in Cladding using a Low Power Pulsed Nd:YAG Laser", Journal of KWJS, 25(4), 49 (2007).