Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집)

Korean Tunnelling and Underground Space Association (한국터널지하공간학회)
권호 표지
DOI QR코드

DOI QR Code

Dynamic response of middle slab in double-deck tunnel due to vehicle load

차량하중에 의한 복층터널 중간슬래브의 동적 응답

  • Received : 2017.07.27
  • Accepted : 2017.09.05
  • Published : 2017.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, the construction of underground structure such as a double-deck tunnel is increasing to manage rapid growth of roadway traffic volume. Double-deck tunnel includes middle slab to separate upper and lower road inside, and various sources affect the dynamic behaviour of middle slab due to dynamic loading of vehicle. Therefore, it is important to investigate the dynamic response of middle slab precisely to apply it to design and analysis of double-deck tunnel. In this study, dynamic analysis model of middle slab considering structural type, design velocity, vehicle load, and surface roughness, etc. is built. 3-dimensional dynamic analysis is performed to assess dynamic response of middle slab. Consequently, Dynamic Magnification Factor which represents dynamic response of middle slab shows maximum in case of elastomeric bearings (EB) and average roughness (Grade C). It is also expected that dynamic response can be reduced under the condition of good roughness (Grade B) and fixed bearings (FB).

최근 급증하는 도로 교통량을 원활히 처리할 수 있는 대안으로 복층터널과 같은 지하구조물의 건설이 증가하고 있다. 복층터널은 내부에 상부와 하부를 분리하는 중간슬래브가 존재한다. 중간슬래브는 차량이 주행할 때 발생하는 차량의 동적하중으로 인하여 동적거동을 하게 되며, 그 동적거동을 정확히 파악하여 설계 및 해석에 이용하는 것이 중요하다. 본 연구에서는 복층터널 중간슬래브의 구조형식, 설계속도, 주행차량 및 노면조도 등을 고려한 해석모델을 작성하고 노면에 차량이 일정속도로 주행하는 경우에 대해 3차원 동적해석을 수행하여 복층터널 중간슬래브의 동적거동을 분석하였다. 그 결과, 중간슬래브의 동적영향을 대표하는 동적확대계수는 탄성받침 지지조건 및 보통의 노면조도 조건에서 가장 크게 증폭되는 경향을 보였고, 양호한 노면조도와 강결연결 조건에 의해 동적영향을 작게 할 수 있음을 확인하였다.

Keywords

References

  1. Biggs, J.M., Suer, H.S., Louw, J.M. (1959), "Vibration of simple span highway bridges", Transaction of the American Society of Civil Engineers, Vol. 124, No. 2, pp. 291-318.
  2. Dodds, C.J., Robson, J.D. (1973), "The description of road surface roughness", Journal of Sound and Vibration, Vol. 31, No. 2, pp. 175-183. https://doi.org/10.1016/S0022-460X(73)80373-6
  3. Fryba, L. (1999), Vibration of solids and structures under moving loads, Thomas Telford, London, UK. pp. 103-128.
  4. Fryba, L. (1968), "Impacts of two-axle system traversing a beam", International Journal of Solids and Structures, Vol. 4, pp. 1107-1123. (doi:10.1016/0020-7683(68)90026-7)
  5. Gupta, R.K. (1980), "Dynamic loading of highway bridges", ASCE, Vol. 106, No. EM2, pp. 377-394.
  6. Honda, H., Kajikawa, Y., Kobori, T. (1982), "Spectra of road surface roughness on bridges", ASCE, Vol. 108, No. ST9, pp. 1956-1966.
  7. Huang, D., Wang, T.L., Shahawy, M. (1995), "Vibration of thin-waled box-girder bridges excited by vehicles, Journal of Structural Engineering, ASCE, Vol. 121, No. 9, pp.130-137.
  8. Hwang, E.S. (1990), Dynamic load for girder bridges, Ph.D. Dissertation, University of Michigan.
  9. Inbanathan, Mahil J., Martin, W. (1989), "Closure to "Bridge vibrations due to vehicle moving over rough surface" by Mahil J. Inbanathan and Martin Wieland (September, 1987, Vol. 113, No. 9)." Journal of Structural Engineering 115.7: 1820-1821. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:7(1820)
  10. ISO 8608. (1995), Mechanical vibration -Road surface profiles- Reporting of measured data.
  11. Li, C., Fafitis, A. (1994), Study of Bridge Vibration due to Moving Vehicles, PD Vol. 64-7, Engineering System Design and Analysis, ASME, Vol. 7, pp. 59-66.
  12. Makris, N., Constantinou, M.C. (1991), "Fractional-derivative Maxwell model for viscous dampers", Journal of Structural Engineering, 117.9: 2708-2724. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:9(2708)
  13. Medeot, R. (1991), "The evolution of aseismic devices for bridges in Italy, proceedings of the 3rd world congress on joint sealing and bearing system for concrete structure", National Center for Earthquake Engineering Research, State University of New York at Buffalo, New York, USA., Vol. 2, pp. 1295-1320.
  14. Mulcahy, N.L. (1983), Bridge Response with Tractor-Trailer Vehicle Loading, Earthquake Enginering and Structural Dynamics, Vol. 1, p. 649-65.
  15. Trail-Nash, W.R., GUPTA, R.K. (1980), "Bridge dynamic loading due to road surface irregularities and breaking of vehicle", International Journal of Earthquake Engineering and Structural Dynamics 8: pp.83-96. https://doi.org/10.1002/eqe.4290080202
  16. Wang, T.L., Garg, V.K., Chu, K.H. (1991), "Railway bridge vehicle interaction studies with new vehicle model", Journal of Structural Engineering, ASCE, Vol. 117, No. 7, pp. 2099-2116. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:7(2099)
  17. Wu, J.S., Dai, C.W. (1987), "Dynamic responses of multispan uniform beam due to moving loads", Journal of Structural Engineering, ASCE, Vol. 113, No. 3, pp. 458-474. https://doi.org/10.1061/(ASCE)0733-9445(1987)113:3(458)